Fittings and nozzles
fittings and nozzles
Rayet sprinter + hose 1 meter
Rayet sprinter + hose 1 meter as an addition to your hydroponic system.
5mm Arrow Dripper Bent
There is a limit of water flow and maximum capacity of 2 liters per hour.
It is suitable for a drip irrigation system of soil.
3/4mm Adjustable Dripper on Stake (360 Degrees)
3/4mm Adjustable Dripper on Stake (360 Degrees)
5mm Arrow Dripper Bent
There is a limit of water flow and maximum capacity of 1 liter per hour.
It is suitable for a drip irrigation system of soil.
AGRAS self compensating dripper 2L/H
Self-Compensating and self-cleaning dripper with No-Drain system.
Placed directly onto ΡΕ pipe 12 – 32 mm or at the end of pipe 6mm. The outlet of the dripper can be connected with micro-tube dripper hose 3,2mm or distribution manifold. Dripper operates when pressure is > 0,5 bar and seals when pressure is < 0,3 bar.
Drip irrigation hole puncher Ф3mm
Hole Punch is used with drip irrigation to create quarter inch holes for quarter inch barbed fittings and drippers.
Its designed to fit comfortably in your hand and has a tip that cuts a quarter inch hole in both half and three quarter inch solid poly tubing.
Using it is easy!To use, simply locate the area on the drip tubing where you what to add a fitting or drip emitter. Grab the tubing between your thumb and forefinger, squeezing slightly. Next, place the tip against the tubing and firmly press down, twisting back and forth. As you pierce the tubing, you may hear a popping sound.
Emitters and fittings are then inserted into the hole. They will snap into place as you insert them.
Hole punches come in various models to suit your specific needs & budget.
