Garden shears

These scissors are equipped with springs so they open automatically, which greatly reduces hand fatigue , making these scissors great for people with arthritis, carpal tunnel. The Comfort Grip handles will make it easier for you to work for long periods of time without discomfort.

Ultra sharp blades:

These quality shears are made of stainless steel with precision sharpened blades and are ready to handle any type of vegetation.

Safe lock:

Equipped with microscopic seals for a safe and secure side closing mechanism. The design of these scissors is ideal for use whether you are right-handed or left-handed.

With these blades, you can easily reach between plants to cut just the area or part you want to cut with one hand and without damaging vital stems and branches.

Bluelab EC and PH Tester Cleaning and Maintenance Kit

Accurate readings simplify crop management and ensure crop improvement . Cleaning and properly storing the probe ensures that you get the most accurate readings possible and increases its life. The surface of the probe is where the instrument reads a solution or soil measurement . If the probe body is dirty , readings may be inaccurate.

Tip: If the EC tester reads a lower conductivity than the actual one, the probe needs cleaning. pH probes specifically, must be kept moist at all times for optimal performance and life.

The set contains:

1. calibration solution pH 4.0 20ml x 2 pcs
2. calibration solution pH 7.0 20ml x 2 pcs
3. calibration solution pH 2.77 20ml x 2 pcs
4. solution for storing pH tester KCL 20ml x 2 pcs
5. solution for cleaning the EU probe 30 ml x 1 pc
6. pH probe cleaning solution 30ml x 1 pc
7. cleaning equipment

Measure pH, conductivity and temperature on the go. The Bluelab Combo Meter provides ultimate convenience by taking care of the three main factors of nutrient absorption simultaneously.

Not only that, but this multi-parameter meter and its probes feature a brilliantly simple design. The Bluelab pH probe is easy to use, clean and calibrate; when the time comes, it's also easy to replace. ( spare probe see here )

Features:

• Measures pH, conductivity (EC, CF, ppm 500 and ppm 700) and temperature (°C, °F)
• Lightweight and portable
• Interchangeable dual compound pH probe
• Large and easy to read display
• Overrange or underrange indicators
• Easy pH calibration at the push of a button
• Low battery indicator.
• Automatic shut-off function
• Indicator of successful pH calibration
• 2x AAA alkaline batteries included
• No calibration required for conductivity and temperature
• 2m cable for measuring hard-to-reach places

BlueLab Guardian Monitor

The Bluelab Guardian Monitor is a continuous indicator of the current EC, pH and temperature levels of your nutrient solution, allowing you to optimize these parameters as your plants progress through each growing phase.

Features:

• "Plant Safe" green LED display
• Visual alarm for high and low settings
• Large, easy-to-read displays
• Greater tolerance to RF/electronic interference is provided
• No conductivity or temperature calibration required
• Waterproof design
• Selectable conductivity and temperature units
• International power supply
• Easy pH calibration at the push of a button
• Adjustable display brightness
• Interchangeable dual compound pH probe
• Settings are saved in case of power loss (non-volatile memory)

How to set up/mount and calibrate, see below in description

The Bluelab Truncheon Meter is a robust and reliable everyday tool for measuring the concentration of nutrients in solution. With Truncheon, you'll ensure your plants get the nutrients they need for superior plant health.

Truncheon is factory calibrated with no moving parts or switches. Simply dip the probe into your feed tank and take the reading shown on the LED display.

Characteristics:

• Blue light display
• No calibration required
• EC, CF and ppm 500 and ppm 700 scales
• Fully waterproof
• Automatic on/off function

How to take your first measurement:

1. Remove the meter from the packaging.
2. Dip the probe head into your solution.
3. Wait about 10 seconds for the thermistor to reach the temperature of the solution.
4. Read the measurement indicated by the flashing LEDs. If the flashing lights alternate between two numbers, the measurement is the value between those two numbers. For example, if the lights alternate from 0.8EC and 1.0EC, the reading is 0.9EC.
5. Truncheon will turn off after about 10 seconds. If additional measurements are to be taken, remove the stick from the solution, wait a few seconds and reinsert it. It will turn on again.
6. We recommend that the probe be cleaned and accuracy checked in Bluelab 2.77 EC Solution once a month.

Note: For low or high temperatures, it may take 1-2 minutes for the probe to reach solution temperature. Try placing the probe in an area where there is strong movement of the solution, or stir the solution with the probe.

Tip: In addition to being used to measure nutrient levels, the Truncheon Meter can also be used to stir nutrients into your solution.

Bluelab pH pen - compact, easy and convenient to use, the best solution for measuring pH.

The Bluelab pH Pen is a durable, compact and accurate pH and temperature pen for use in nutrient solution. Use the pH pen to quickly and accurately tell if your solution is too acidic or alkaline, or too hot or cold. Designed for everyday use, the Bluelab pH Pen helps you keep your plants in the optimal pH and temperature range so your plants can thrive.

Care Tips:

Clean and calibrate your probes monthly to maintain probe accuracy.
Always store the pH probe in the storage cap with enough KCl (potassium chloride) storage solution to cover the tip of the probe. The probe will be damaged if left dry. Read more about KCl Storage Solution.
The glass tube can be easily damaged. Be careful not to hit the glass.
Do not immerse in oils, proteins, or suspended solids, which will leave a coating on the glass flask.
Never store or soak the pH probe in RO, distilled or deionized water.

Bluelab soil pH pen

The Bluelab Soil pH Pen is an accurate way to measure soil pH and temperature directly in the root zone of your plants. If necessary, the soil pH pen can be used in nutrient solutions .

Simply poke a hole in the soil with the storage cap and insert the probe to get constant pH and temperature measurements.

Features:

• Selectable units for °C and °F
• Fully waterproof
• LCD display with backlight
• Read hold function
• Storage cap
• Automatic shut-off function

How to use:
**Important : You must calibrate your pH pen before first use .

• Use the storage cap to make a hole in the soil. Place as deep as the roots of your plant.
• Carefully remove the storage cap by first unscrewing the cap and gently pulling to remove the probe. The cap contains KCl solution , so be careful not to spill the liquid. The formation of a salt crust around the probe is normal.
• Turn on the pen and insert the probe into the opening. Make sure the tip of the probe is in contact with the soil at the end of the hole. The display will stabilize and give you pH and temperature readings.
• Rinse after use to remove nutrient build-up or dirt and replace cap for storage

How to calibrate:
**Calibrate after each cleaning and at least once a month.

• Turn on the pH pen.
• Calibrate to pH 7 by placing the probe tip in a pH 7 solution . Wait for the reading to stabilize between pH 6.6 - pH 7.5 .
• Long press the Cal button until CAL is displayed. Release the button. The calibration sequence will begin flashing "0" on the display in sequence. Once “0000” stops flashing, the sequence is complete. Rinse the probe tip in fresh tap water.
• Repeat with pH 4 solution.
• A checkmark will confirm successful calibration.

Hydrate
** Keep the probe hydrated with Bluelab KCl solution. Without proper hydration, readings may be inaccurate and the probe may break.

1. Add enough KCl storage solution to submerge the tip of the probe in a plastic cup and allow to soak for 24 hours.
2. Make sure there are a few drops of KCl solution in the storage cap .

This meter works very accurate and has a micro processor and automatic temperature compensation.

This is the right choice for a low price if you want to grow like an expert.

Technical Data:

* 250 life hours of the batteries

* Batteries included

* Accuracy: +- 0.1 pH

* Increments: 0.1 pH

* Capacity: -2.0 pH up to +16 pH

This meter works very accurate and has a micro processor and automatic temperature compensation.

The TOMAX 645W SE LED Grow Light features 6 LED bars, a high-quality driver and efficient LEDs, generating a full spectrum for every stage of your plants' development. A suitable light source for the entire development cycle from vegetative to the end of flowering . The lamp has a dimmer to adjust the power according to the needs of the plants and the stage of their development.

TOMAX 645W Foldable LED Grow Light is designed with 6 LED bars, high quality Inventronics driver and Samsung and Osram LEDs, generating full spectrum. A suitable light source for the entire development cycle from vegetative to the end of flowering. For the different varieties and periods, the lamp has a dimmer to adjust the power according to the needs of the plants and the stage of development.

High Efficiency Optimized for PAR, Extremely Sufficient Lights Spectrum, Super Light Penetration

• Plants grow faster and flower bigger: Enhanced spectral output covering full PAR (400-730nm) promotes photosynthesis for Growth & Bloomming,
• High Efficiency Powerful 3Watt BridgeLux/ Epistar LEDs, Low Energy Consumption
• Powerful  Cooling fan system inside, Cool and Quieter
• Revolutionary Heat Aluminium PCB, Run 80% cooler than high intensity discharge (HID) lights
• 1pcs Strong Hanging Kits are available for Easy Installation
• All LEDs with a Zener to ensure One LED Goes Out the Rest Continue to Operate
• 3years Long Life Span, Energy Saving and Environmental Protection

Specifications :

• Optimized Full Spectrum best for growing and flowering : 645nm~660nm, 620nm~630nm, 450nm~460nm, 430nm~440nm, 2700K~3000K, 3000K~3500K,
• Real IR spectrum help plants flower better : 730nm
• LED Quantities: 60/90/120/150/180/240/270/300PCS Exclusive 3W Bridgelux/ Epistar grow LEDs
• Maximum LED Power: 300/450/600/750/900/1200/1350/1500W
• View Angle: 90 degree and 120 degree mixed LED, different color light mix very well
• Life Span: ≥ 3 years
• Warranty: 2years
• Working Temperature: -20 to 40 degrees

Package include :

• 1 x Apollo LED Grow Panel Light
• 1 x Free Hanging Kit
• 1 x Free Power Cord

High Efficiency Optimized for PAR, Extremely Sufficient Lights Spectrum, Super Light Penetration

• Plants grow faster and flower bigger: Enhanced spectral output covering full PAR (400-730nm) promotes photosynthesis for Growth & Bloomming,
• High Efficiency Powerful 3Watt BridgeLux/ Epistar LEDs, Low Energy Consumption
• Powerful  Cooling fan system inside, Cool and Quieter
• Revolutionary Heat Aluminium PCB, Run 80% cooler than high intensity discharge (HID) lights
• 1pcs Strong Hanging Kits are available for Easy Installation
• All LEDs with a Zener to ensure One LED Goes Out the Rest Continue to Operate
• 3years Long Life Span, Energy Saving and Environmental Protection

Specifications :

• Optimized Full Spectrum best for growing and flowering : 645nm~660nm, 620nm~630nm, 450nm~460nm, 430nm~440nm, 2700K~3000K, 3000K~3500K,
• Real IR spectrum help plants flower better : 730nm
• LED Quantities: 60/90/120/150/180/240/270/300PCS Exclusive 3W Bridgelux/ Epistar grow LEDs
• Maximum LED Power: 300/450/600/750/900/1200/1350/1500W
• View Angle: 90 degree and 120 degree mixed LED, different color light mix very well
• Life Span: ≥ 3 years
• Warranty: 2years
• Working Temperature: -20 to 40 degrees

Package include :

• 1 x Apollo LED Grow Panel Light
• 1 x Free Hanging Kit
• 1 x Free Power Cord

High efficiency and optimized for PAR!

• Plants grow faster and the flowers are more voluminous:
• High efficiency - powerful 3W BridgeLux / Epistar LEDs, low energy consumption
• Powerful built-in Cool and Qieter ventilation system
• Revolutionary thermal aluminum circuit board, operating at 80% lower temperature than high-intensity discharge (HID) lights
• Easy installation
• 3 years of life, energy saving and environmental protection

Specifications:

• Optimized Full Spectrum
• LED pcs.: 150 pcs x 3W Bridgelux / Epistar LEDs
• Maximum LED power: 450W
• Average power: 364W
• View Angle: 90 degrees and 120 degrees mixed LEDs, because different color lights mix very well
• Life expectancy: ≥ 3 years
• Warranty: 2 years
• Operating temperature: -20 to 40 degrees
• Life: > 50,000 hours
• 6000Lm

The package includes:

• 1 x Apollo LED panel
• 1 x free hanging kit
• 1 x power cord

The growth, fruiting, hardiness and even flowering time of plants are completely dependent on the light they receive. The quality and intensity of light, as well as the duration of lighting are extremely important! Building the right lighting system would guarantee you excellent results. LED lamps are the latest innovation in lighting systems for indoor growing. Their advantage is lower energy consumption, more the low heating compared to HPS and MH lamps and their longer life.

High Efficiency Optimized for PAR, Extremely Sufficient Lights Spectrum, Super Light Penetration

• Plants grow faster and flower bigger: Enhanced spectral output covering full PAR (400-730nm) promotes photosynthesis for Growth & Bloomming,
• High Efficiency Powerful 3Watt BridgeLux/ Epistar LEDs, Low Energy Consumption
• Powerful  Cooling fan system inside, Cool and Quieter
• Revolutionary Heat Aluminium PCB, Run 80% cooler than high intensity discharge (HID) lights
• 1pcs Strong Hanging Kits are available for Easy Installation
• All LEDs with a Zener to ensure One LED Goes Out the Rest Continue to Operate
• 3years Long Life Span, Energy Saving and Environmental Protection

Specifications :

• Optimized Full Spectrum best for growing and flowering : 645nm~660nm, 620nm~630nm, 450nm~460nm, 430nm~440nm, 2700K~3000K, 3000K~3500K,
• Real IR spectrum help plants flower better : 730nm
• LED Quantities: 60/90/120/150/180/240/270/300PCS Exclusive 3W Bridgelux/ Epistar grow LEDs
• Maximum LED Power: 300/450/600/750/900/1200/1350/1500W
• View Angle: 90 degree and 120 degree mixed LED, different color light mix very well
• Life Span: ≥ 3 years
• Warranty: 3years
• Working Temperature: -20 to 40 degrees

Package include :

1 x Apollo LED Grow Panel Light
1 x Free Hanging Kit
1 x Free Power Cord

This reflector is characterized by its absolute stability.

Adjust-A-Wings is a high-end reflector equipped with a Super Spreader for even higher efficiency.

Manufactured from the highest quality materials, this reflector brings a number of benefits to both plants and gardeners. Designed for maximum efficiency, the Avenger model is made with a coating of fused glass and titanium dioxide, using PVD (Physical vapor deposition). technology - the most advanced technique for laying reflective surface layers on a number of work surfaces. This coating is the most reflective, most durable and sustainable coating known to science.

• Twice the power and efficiency of most other reflectors on the world market;
• Increase the cultivation area, with each lamp, by up to 75%;
• Increases lamp performance up to 50%;
• Reduces heat, saves energy;
• Corrosion resistant;
• 97% Reflection;
• Super Alloy glass coating;
• Adjustable double, parabolic reflectors.
• Dimensions: 100cm x 70cm
• Suitable for: 1000W or 2x400W, 2x600W sodium (HPS) or metal halide (MH) lamps
• Illuminated area: Up to 3.89 m2.

This reflector is characterized by its absolute stability.

Cleaning cloth for lamps and reflectors

All light bulbs must be wiped of fingerprints after installation. This microfiber cloth is perfect for that. Removes fingerprints and dust from lamps, glass, light fixtures, etc. Size: 40x40cm.

OSRAM PLANTASTAR ® was developed in order to satisfy the needs of gardeners for a quality light source, specially emitting in a spectrum suitable for growing plants in both phases - growth and flowering

Lighting in greenhouses cannot be compared, for example, to that on roads, due to the difference between the way plants perceive light and the perception of light by the human eye. With the entry of PLANTASTAR ® sodium lamps on the market, Osram provides a light source that meets all the requirements for good lighting for growing plants.

Low maintenance costs, extremely constant luminous flux during the first 20,000 operating hours, optimized design with patented damper, new, reinforced sodium-resistant ceramics guaranteeing a long life, laser welding ensures precise geometric connection and consistently high quality due to optimized production method are part of the characteristics of this lamp! After the period of 20,000 rab. hours or every two years it is recommended to change the lamps.

• Power: 600W
• Socket: E40
• Luminous flux: 90,000lm
• Color temperature: 2000K
• Lamp current: 6.06A

The growth, fruiting, hardiness and even flowering time of plants are completely dependent on the light they receive. The quality and intensity of the light as well as the duration of illumination are extremely important! Building the right lighting system would guarantee you excellent results. Combination lamps emit both red and blue light, making them a suitable light source for both the flowering phase and and for the growth phase.

The first dedicated CFL for root development and propagation

The 2700k spectrum of the EnviroGrow CFL Super Cool self ballasted compact fluorescent lamps is quite unique. Developed by PowerPlant it is dedicated to root development and propagation.

The EnviroGrow CFL Super Cool units feature ultra high output compact fluorescent lamps that are powered by an integral power unit. This unit is soon to have dedicated packaging to show it is Super Cool White. Ideal for Ttssue culture laboritories, growing stock plants and cloning for hobbyists and professionals.

Power Plant HIT/HBU/LU Metal Halide Lamp - 1000 watt.

• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.

We recommend that lamps are replaced every 12 to 14 months, after 14 months there is an appreciable drop in the lumen output leading to a reduction in crop yield 


1000w hps = 100,000 lumens

Power Plant HIT/HBU/LU Metal Halide Lamp - 600 watt.

• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.

We recommend that lamps are replaced every 12 to 14 months, after 14 months there is an appreciable drop in the lumen output leading to a reduction in crop yield 


600w hps = 51,000 lumens
 

Metal halides have the more balanced spectrum.

The light they give out has a significant amount of light from the bluer end of the spectrum, which the plant uses to grow vegetatively. It produces plants with a small internodal length, with large leaves and thick stems. It produces the most natural looking plants. It simulates the light from the beginning of the year and is good for plants before they're switched into flowering mode.

They're normally slightly more expensive than HPS. Recently, there have been 'enhanced spectrum' MH bulbs produced which also give off a significant amount of red light. Conversion bulbs are also available which plug into HPS ballasts which are actually MH bulbs. Useful for changing the light balance without changing the ballasts also. In the event of a power failure, they need about 20 minutes before restating. They may restart earlier but it shortens the life of the bulb quite dramatically to try and start a hot bulb.

• Power Plant HIT/HBU/LU Metal Halide Lamp - 1000 watt.
• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.400w hps = 38,000 lumens

Metal halides have the more balanced spectrum.

The light they give out has a significant amount of light from the bluer end of the spectrum, which the plant uses to grow vegetatively. It produces plants with a small internodal length, with large leaves and thick stems. It produces the most natural looking plants. It simulates the light from the beginning of the year and is good for plants before they're switched into flowering mode.

They're normally slightly more expensive than HPS. Recently, there have been 'enhanced spectrum' MH bulbs produced which also give off a significant amount of red light. Conversion bulbs are also available which plug into HPS ballasts which are actually MH bulbs. Useful for changing the light balance without changing the ballasts also. In the event of a power failure, they need about 20 minutes before restating.

They may restart earlier but it shortens the life of the bulb quite dramatically to try and start a hot bulb.

• Power Plant HIT/HBU/LU Metal Halide Lamp - 250 watt.
• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.250w hps = 23,000 lumens

A 250W lamp suitable for both growing and flowering stages.

Stimulates photosyntesis due to the emitted blue light.

Range features

• Patented arc tube delivers highest photosynthetic efficiency of any lamp in the world
• Performance maintained at an exceptional level due to improved structure of outer bulb
• Optimised for the highest Phytolumens or PAR output
• GroLux light spectrum maximises red output essential for plant growth
• Industry leading lumen maintenance of 95% at the end of life
• Suitable for a plethora of applications related to plant growth

A 400W lamp suitable for both growing and flowering stages.

Stimulates photosyntesis due to the emitted blue light.

Range features:

• Patented arc tube delivers highest photosynthetic efficiency of any lamp in the world
• Performance maintained at an exceptional level due to improved structure of outer bulb
• Optimised for the highest Phytolumens or PAR output
• GroLux light spectrum maximises red output essential for plant growth
• Industry leading lumen maintenance of 95% at the end of life
• Suitable for a plethora of applications related to plant growth

These new energy saving light bulbs give low power consumption and bring. Plants due to their wide spectrum of light safely through the growth and bloom phase

• Elektrox Flower 200W
• CFL for flower
• 2700K
• 6U 
• E40 socket
• integrated electronic balast
• 11 000lm

• 9 000 lm / 
• 200 W / 
• 6500 K / 
• 6U / 
• E40 socket / 
• Electronic instant start built-in-ballast

These new energy saving light bulbs give low power consumption and bring. Plants due to their wide spectrum of light safely through the growth and bloom phase

• Elektrox Flower 200W
• CFL for flower
• 2700K
• 6U 
• E40 socket
• integrated electronic balast
• 9000lm

The color emitted by these lamps is very distributed throughout the spectrum.

It contains some colors of the spectrum that are not found in mercury lamps, so halogenides are more suitable for the growth of plants, emitting a blue / white light. Within the halide lamps used in indoor gardening, the most used are the SUNMASTER due to the development, branching, dry weight, production, etc. that is achieved with them. 600W bulb.

• Wattage: 600W
• Mains Voltage (V): 400V
• Rated Hours: 6000
• CCT (K): 4500 K
• Luminous Flux (lm): 50 000
• Bulb Screw: E40

Sylvania combined sodium lamps are one of the most used in growing

They have improved radiation in both the blue and red spectrum, which increases the efficiency of photosynthesis and stimulates even more intensive flowering. Applicable in any phase of the plant's life. Exceptional level of performance thanks to the improved structure of the bulb body. For use as main or additional artificial lighting for plants. Recommended for use in greenhouses.

• is connected to the network through a suitable choke
• to be located at least 60 cm from the tops of the plants
• socket E40
• Efficiency: 141Lm/W
• amperage: 5.5A
• luminous flux: 90,000 Lm
• life: 24000 hours
• color temperature: 2050K
• recommended ambient temperature: 25°C

The growth, fruiting, hardiness and even flowering time of plants are completely dependent on the light they receive. The quality and intensity of the light, as well as the duration of illumination, are extremely important. Building the right lighting system would guarantee you excellent results. Combination lamps emit both red and blue light, making them a suitable light source for both the flowering and growing phases.

The Philips SON-T PIA model is an ideal option for the flowering period of your plants

These lamps contribute to better absorption of CO2 , to better and better photosynthesis and growth. Son-T Pia lamps emit the highest amount of light per unit watt (PAR). It is the most efficient lamp with the best technical performance and the lowest energy consumption. It is switched on by means of a choke/ballast, placed 50-60 cm from the top of the plants.

• socket E40;
• specially optimized for flowering;
• real power: 603W ;
• current through the lamp: 5.8A;
• voltage: 110V;
• light output: 86,500Lm;
• life: 20000 hours;
• color temperature: 2000K;

The growth, fruiting, hardiness and even flowering time of plants are completely dependent on the light they receive. The quality and intensity of the light, as well as the duration of lighting are extremely important! Building the right lighting system would guarantee you excellent results.
HPS lamps emit red light that helps increase production in the flowering phase.

Digital Ballast Lumatek provides the most advanced technology on the market for greenhouse lighting. 

Compact and completely silent, it has the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the model's lamp and its condition as well as to network's voltage.Lumatek Twin 600W 240 V is adjustable, electronic ballast for use with one or two 600W and / or 400W 240V HPS and MH lamps  for plants.

Why Digital Ballasts?

• More Lumen Output - Up to 20% more lumens output than some old style magnetic ballasts ...More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard to try to keep up with Lumatek’s lumen output.
• Stable Light Output - Excellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.
• Fast Start-up - It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes.
• Completely Silent - No noise or vibration of any kind
• Produce Less Heat - Less heat generated by the ballasts allows cooler running of the environment. Less heat is less wasted electricity.
• Longer Bulb Life - Lumen output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.

Nothing works as well as the relationship between 600W lamp and HOMEbox® Ambient

Q120! All thanks to PAR + patreshno super reflective coating. Plants grow faster and produce more flowers and fruit as most usable light is directed to the tent. Crop quality is also remarkable because of the lower temperature rise (maintaining too high a temperature is the number one reason for the deterioration of Culture). 

CO2 Boost works from a combination of all-natural compost ingredients.

The ingredients are mixed and placed in the bucket where the CO2 is then naturally created. The pump draws CO2 out of the bucket and released to your plants.

This product releases anywhere from 5000-15000 ppms if your CO2 monitor is placed DIRECTLY in front of the release valve. These levels decrease sufficiently once they are released into the ambient air. If your grow room is properly sealed, you can achieve optimum growing levels at 1200-1500ppms for sizes up to 10'x10'x10', if your growing area is larger than that we suggest multiple buckets.

CO2 Boost lasts at least 60 days if used constantly. If you coordinate our product with a timer to coincide with your lights on/lights off phase, it will last you 75-90 days. We suggest one bucket per growing cycle to be safe. The maximum shelf life of an open bucket is 90 days.

Even though it's a 100% organic product it is completely odorless. 

Each bucket comes with a small air hose that is attached to the pump. The best distribution method is to place this air hose directly over top of your plants to let the Co2 fall downwards onto the leaves and roots. This method is a nice way to dodge problems such as air leaks and ventilation. Inside your order you will find a pamphlet that includes a "set up and growing tips" section for more information.

CO2 Boost's ingredients are 100% all-natural and harmless. As a matter of fact once your bucket has expired you can open the bucket and use the remaining ingredients as high grade fertilizer!. The pump draws CO2 out of the bucket and released to your plants.

CO2 Boost with ingredients that are 100% all-natural and harmless

- Compact, small and lightweight

- No dangerous open flames!

- No CO2 emitters or generators to mess with

Dozer machine

Works with CO2 tablets . Place CO2 tablets in the slots in the machine and set the interval at which the machine releases them into your tank.

Set for germination and cuttings, giving the best start to your seedlings

The set includes a propagator, tray and Jiffy peat pellets. Humidity is controlled by adjustable holes on the top of the lid. The high coverage provides more volume, which allows the cuttings to stay longer so that they are stronger before grafting. The tray has 60 pcs. baskets. Pellets are a reliable substrate for seed germination and rooting of cuttings. Immerse the pellets in water until they swell, then place the seeds. Jiffy blocks are wrapped in a biodegradable paper wrapper that keeps them intact.

Dimensions of the propagator: 55x34x20

Dimensions of the tray: 52/31 cm with 60 pcs. baskets

diameter of the basket: 4.5 cm

Jiffy pellets: 41mm

ROOT !T kit for germination and cuttings, giving your seedlings the best start!

The set includes a Root it propagator , a tray with 104 nests of peat blocks . Humidity is controlled by adjustable vents on the top of the propagator . The high coverage provides more volume, allowing the cuttings to stand longer so that they are stronger before grafting .

100% biodegradable and eco-friendly. It contains necessary trace elements and microorganisms, supporting the germination and initial growth of the cuttings .

• Propagator: 55x34x20
• Tray with 104 nests of peat blocks
• basket diameter: 33mm