Ventilation and Climate
Fresh air is your friend!
Any room for growing (indoor) must have a well-made ventilation system. In order to be successful with harvesting in your garden, you should also be considered about the cleanliness, the introduction of fresh air into the room and ventilation.
Here are the most important components needed to build the ideal for your needs, ventilation system.
Cyclone 30cm - circulating fan
Cyclone fan 30cm - high performance
Cyclone floor ventilator 30 cm in diameter is compact and powerful, designed to mix air inside the room and prevent the creation of airbags, designed for greenhouses and growboxes. The fan has 3 speeds from low to high which you can choose depending on the heat.
Good ventilation in your indoor environment reduces temperature and helps plants to grow stronger, prevent the proliferation of pests and fungi, and also enhance the assimilation of CO2.
• Flow rate up to 16.31 m3 / min.
• Fan with a power of 45 W.
• Power supply 220 / 240W, 50Hz
• Maximum air speed up to 3.27 meters / second.
• Quiet, maximum 57.20 dB
• Powerful and quiet engine with three different speeds
Cyclone 40cm - circulating fan
Cyclone fan 40cm - high performance
Cyclone floor ventilator 40 cm in diameter is compact and powerful, designed to mix air inside the room and prevent the creation of airbags, designed for greenhouses and growboxes. The fan has 3 speeds from low to high which you can choose depending on the heat.
Good ventilation in your indoor environment reduces temperature and helps plants to grow stronger, prevent the proliferation of pests and fungi, and also enhance the assimilation of CO2.
• Flow rate up to 30.07m3 / min.
• Power supply 220 / 240W, 50Hz
• Maximum air speed up to 3.96 meters / second.
• Quiet, maximum 62.7 dB
• Powerful and quiet engine with three different speeds
Floor fan 30cm
Circulating, floor fan with a powerful motor for maximum air circulation and perfectly designed blades for quiet operation.
Specifications:
- Model no. FE-30
- Body material Steel
- Blade material Aluminum or Steel
- Voltage/Frequency 110~130VAC/60Hz or 220~240VAC/50Hz
- Power 45W
- Motor speed(±150RPM) 1:950RPM 2:1100RPM 3:1250RPM
- Speed setting 3 speeds
- Power cord & Plug 3X0.75mm² and 1.7m power cord,plug with your requirement.
- Height 39cm
- Up-down tilt degree 120°
Ram 40cm - circulating fan
Air movement is very important in your grow room as it strengthens up your plants and circulates the air around, creating more even temperatures throughout.
Features:
- 100° Tilt Adjustable head
- 100W
- Quiet operation
- Maximum air movement from premium motor
- Finger safe mesh grill
- Easy to use, no assembly required
Floor Fan 45cm
Circulating, floor fan with a powerful motor for maximum air circulation and perfectly designed blades for quiet operation.
Specifications:
Circulating, floor fan with a powerful motor for maximum air circulation and perfectly designed blades for quiet operation.
Specifications:
- Model no. - FE-40
- Body material - Steel
- Blade material - Aluminum or Steel
- Voltage/Frequency - 110~130VAC/60Hz or 220~240VAC/50Hz
- Power - 85W
- Speed setting - 3 Speeds
- Up-down tilt degree - 120°
Cyclone Floor Fan Siroco - 18''/45cm.
Spec:
-
Diameter - 45cm.
-
Speeds - 2
-
Power - 91W
Ralight 50cm - circulation fan
The Ralight wall fan 45T-W 18 inch (45 cm)
The wall fans are ideal for rooms where used every inch of space. By attaching a fan on the wall prevents the air flow is blocked by any objects placed on the ground. By the simple suspension system, the Wall Fans easy to attach to the wall or ceiling .
- Easy to mount on the wall
- Pivoting
- Manually set vertically.
- Speed adjustable in 3 steps
- Modern design
- Professional quality
- Turns in 3 settings
- The Ralight wall fan has a maximum capacity of 18.000 m3 p/h
- This fan can also be assembled upside down
Ralight 50cm - circulation fan
The Ralight wall fan 50T-W 20 inch (50 cm)
The wall fans are ideal for rooms where used every inch of space. By attaching a fan on the wall prevents the air flow is blocked by any objects placed on the ground. By the simple suspension system, the Wall Fans easy to attach to the wall or ceiling .
- Easy to mount on the wall
- Pivoting
- Manually set vertically.
- Speed adjustable in 3 steps
- Modern design
- Professional quality
- Turns in 3 settings
- The Ralight wall fan has a maximum capacity of 192m2
- This fan can also be assembled upside down
SonoTrap Acoustic Ducting - Ø102mm/6m
Fully flexible, thermally and acoustically preinsulated ducting with a polypropylene fabric cloth inner duct to encapsulate a high carbon, spring steel wire helix.
The inner core is wrapped with a thick blanket of high-density insulation and covered with an outer vapor barrier constructed from multiple layers of black polyester.
Black - inside Ф127 / 1m
Combined Flexible Duct product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa.
● Air-tight, easy to install, and resists
tearing and punctures
● Black inner core helps reduce light
transfer.
● Smooth interior aids in noise
reduction
● Made with heavy duty materials.
Black - inside Ф127 / 10m
Combined Flexible Duct product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa.
● Air-tight, easy to install, and resists
tearing and punctures
● Black inner core helps reduce light
transfer.
● Smooth interior aids in noise
reduction
● Made with heavy duty materials.
Black - inside Ф152 / 1m
Combined Flexible Duct product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa.
● Air-tight, easy to install, and resists
tearing and punctures
● Black inner core helps reduce light
transfer.
● Smooth interior aids in noise
reduction
● Made with heavy duty materials.
Black - inside Ф152 / 10m
Combined Flexible Duct product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa.
● Air-tight, easy to install, and resists
tearing and punctures
● Black inner core helps reduce light
transfer.
● Smooth interior aids in noise
reduction
● Made with heavy duty materials.
Black - inside Ф203 / 1m
Combined Flexible Duct product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa.
● Air-tight, easy to install, and resists
tearing and punctures
● Black inner core helps reduce light
transfer.
● Smooth interior aids in noise
reduction
● Made with heavy duty materials.
Black - inside Ф203 / 10m
Combined Flexible Duct product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa.
● Air-tight, easy to install, and resists
tearing and punctures
● Black inner core helps reduce light
transfer.
● Smooth interior aids in noise
reduction
● Made with heavy duty materials.
Black - inside Ф254 / 1m
Combined Flexible Duct product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa.
● Air-tight, easy to install, and resists
tearing and punctures
● Black inner core helps reduce light
transfer.
● Smooth interior aids in noise
reduction
● Made with heavy duty materials.
Black - inside Ф254 / 10m
Combined Flexible Duct product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa.
● Air-tight, easy to install, and resists
tearing and punctures
● Black inner core helps reduce light
transfer.
● Smooth interior aids in noise
reduction
● Made with heavy duty materials.
Black - inside Ф315 / 1m
Combined Flexible Duct product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa.
● Air-tight, easy to install, and resists
tearing and punctures
● Black inner core helps reduce light
transfer.
● Smooth interior aids in noise
reduction
● Made with heavy duty materials.
Black - inside Ф315 / 10m
Combined Flexible Duct product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa.
● Air-tight, easy to install, and resists
tearing and punctures
● Black inner core helps reduce light
transfer.
● Smooth interior aids in noise
reduction
● Made with heavy duty materials.
Combiconnect Ф82 / 1m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф82 / 10m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф102-104 / 1m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф102 / 10m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф127 / 1m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф127 / 10m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф152 / 1m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф152 / 10m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф160 / 1m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф160 / 10m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect 203Ф / 1m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect 203Ф / 10m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф254 / 1m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф254 / 10m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф305 / 1m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф305 / 10m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф315 / 1m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф315 / 10m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф356 / 1m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф356 / 10m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф405 / 1m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Combiconnect Ф405 / 10m
Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.
Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.
Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.
Ø102 / 104 1m Sonoconnect - flexible air duct with wadding
Insulated hose to dampen the sound and light.
This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing
SONODECK 102 mm 10mtr
Insulated hose to dampen the sound and light.
This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing
SONODECK 127mm 1mtr
Insulated hose to dampen the sound and light.
This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing
SONODECK 127mm 10mtr
Insulated hose to dampen the sound and light.
This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing
Sonodec 152mm 1mtr
Insulated hose to dampen the sound and light.
This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing
Sonodec 152mm 10mtr
Insulated hose to dampen the sound and light.
This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing
SONODECK 160mm 1mtr
Insulated hose to dampen the sound and light.
This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing
SONODECK 160mm 10mtr flexible duct
Insulated hose to dampen the sound and light.
This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing