Ballasts
Ballasts regulate the voltage supplied to the selected lamp and lights the lamp, creating a high-voltage pulse after a power outage from the starter. Divided into two types - electromagnetic and electronic ballasts. The difference between the two is that the electronic ballast does not require a starter and is usually lighter and heats less. Other advantages are a quiet operation of the conventional reactor, increasing lamp life by 30% - 50% and reduced ripple luminous flux.
Solux Pro Selecta 315W - Electronic Ballast for CMH & LEC Bulbs
Specifications:
-
Output Voltage: 240V
-
Power: 315W
-
Amperage: 1.4
-
Maximum temperature: 70ºC
-
Type: LEC / CMH
-
Dimensions: 228.6x113.8x80.7mm.
Tomax 250W Magnetic Ballast
Ballast with a rated power of 250 W. Appropriate for High Pressure Sodium and Metal Halide bulbs.
Quality Lighting Ballast
This ballast allows the stabilization of the current supplied in output at the same time guarantees a greater stability of the luminous flux and consequently a greater duration of the lamps. Closed body for further isolation and safety, It is wired easily thanks to the screw terminals on the front.
Suitable for the lighting of bulbs HPS and MH 250W.
Tomax 400W Magnetic Ballast
Ballast With a Rated Power of 400 W. Appropriate for High Pressure Sodium and Metal Halide bulbs.
Quality Lighting Ballast
This ballast allows the stabilization of the current supplied in output at the same time guarantees a greater stability of the luminous flux and consequently a greater duration of the lamps. Closed body for further isolation and safety, It is wired easily thanks to the screw terminals on the front.
Suitable for the lighting of bulbs HPS and MH 400W.
EuroGear Pro ballast 600W
The EuroGear Pro ballast closes the gap between cheap low-quality ballasts and expensive high-end products.
Among IP 54 and CE certifications the EuroGear Pro is equipped with a thermal protection to eliminate potential danger of fire. Additionally after production every single ballast is being checked for full operability, so that a safe continuos operation is guaranteed. The EuroGear Pro is fully cabled.
Specifications
- Compact electromagnetic ballast with thermal protection
- 100% EU
- for HPS and HPI-type lamps
- IP 54 and CE certified
- Excellent cost-benefit ratio
- Splashproof enclosure
- 230V/ 50Hz
- Power cable length: 1.5 m
- Lamp cable length: 3.55 m
EuroGear Pro ballast 400W
The EuroGear Pro ballast closes the gap between cheap low-quality ballasts and expensive high-end products
Among IP 54 and CE certifications the EuroGear Pro is equipped with a thermal protection to eliminate potential danger of fire. Additionally after production every single ballast is being checked for full operability, so that a safe continuos operation is guaranteed.
The EuroGear Pro is fully cabled.
Specifications
- Compact electromagnetic ballast with thermal protection
- 100% EU
- for HPS and HPI-type lamps
- IP 54 and CE certified
- Excellent cost-benefit ratio
- Splashproof enclosure
- 230V/ 50Hz
- Power cable length: 1.5 m
- Lamp cable length: 3.55 m
MST 600W ballast
MST 600W is an electromagnetic start-regulating device for sodium and metal halide lamps
It consists of a choke, a starter ("lighter"), a capacitor and a control circuit.
- Warranty: 1 year from date of sale
- 230V, 50Hz; λ>0.9; starting voltage 5KV;
- Cable to lamp <20m (HPS), <2m (MH);
- Protection class IP 20;
Chokes (ballasts) adjust the voltage supplied to the selected lamp, up to the working one for it and ignite the lamp by creating a high voltage pulse after the interruption of the current from the starter. Magnetic chokes are compact and cost-effective devices that are suitable for "lighting" lamps from 250W to 1000W. It is recommended that chokes be kept outside of smaller grow rooms, as they convert some of the electricity they absorb into heat and can thus contribute to an increase in temperature.
GIB 600W ballast
GIB Ballast PRO-V-T 600W with Thermal Fuse
PRO-V-T ballast without internal cable connections, built-in thermostat for automatic over-heating, silent thanks to the anti-vibration base.
- Silent and low vibration due to its anti-vibration base
- Thermal fuse: Excludes the possibility of overheating
- Intelligent shutdown
- Device with a linear fuse
- By standards meeting the requirements for European certification (CE) and European electrical certification standards (ENEC)
- With an explosion-proof capacitor
Master Gear 600W ballast
Electromagnetic ballast for HPS and MH lamps.
Master Gear suitable for coupling with sodium or metal halide lamps with power 600W. The maximum possible distance from the lamp to the throttle is 20 meters for HPS and 5 meters for MH lamps. MASTER GEAR 600W consists of inductors, capacitor and terminal block for connecting input voltage and lamp. 6,2A.
ballast Mari 1000W
1000W ballast for lighting HPS and MH lamps
Specifications:
- CE approved ballast
- Running quiet and high efficient
- With no top housing design for beter cool
ballast Mari 600W
600W ballast for lighting HPS and MH lamps
Specifications:
- CE approved ballast
- Running quiet and high efficient
- With no top housing design for beter cool
ballast ETI 250W
Ballast with a rated power of 250 W. Appropriate for High Pressure Sodium and Metal Halide bulbs.
Quality Lighting Ballast
ETI Magnetic Ballast 250w has been designed for HPS and MH AGRO lamps. Power supplies (o ballast) ETI UAL series are defined “Hybrid” as it equipped with an electronic circuit which integrates the functions lighter and capacitor. The latest models of this series have been improved and adapted to the ignition of all gas discharge lamps. The compact body and wiring in the absence of external leads, make this product particularly suitable for application in the grow room.
This ballast allows the stabilization of the current supplied in output at the same time guarantees a greater stability of the luminous flux and consequently a greater duration of the lamps. The ignition systems ETI have closed for further isolation and safety, It is wired easily thanks to the screw terminals on the front.
Suitable for the lighting of bulbs HPS and MH 250W.
Solux magnetic 1000W ballast
1000W ballast for lighting HPS and MH lamps
High quality 1000 w ballast in Class II. Made in Italy, robust and completely safe, which complies with European legal regulations and tested in accordance with: EN61347-1-2-9, EN60923, EN55015 among others. Very simple connection through the scheme shown. The lamp can be connected at a maximum distance of 16 meters.
- Power (W): 1000
- Output Voltage (V): 230
- Amperage: 10.3А
- Dimensions (mm): 213x176x360
magnetic ballast solux 400W
Ballast with a rated power of 400 W. Appropriate for High Pressure Sodium and Metal Halide bulbs.
Quality Lighting Ballast
- Solux ballasts are suitable for both sodium and metal halide lamps.
- The position called "Super Lumens" increases the power by 10% (440w) with which it squeezes the bulb beyond 100%.
- They incorporate a thermal protection chip. They offer a high efficiency, long duration, comfortable and uniform light based on the reduction of the loss of power and the increase of the luminous efficiency. The lamps start without flashes and provide a stable and quite silent light.
Magnetic ballast solux 250W
Ballast with a rated power of 250 W. Appropriate for High Pressure Sodium and Metal Halide bulbs.
Quality Lighting Ballast
- Solux ballasts are suitable for both sodium and metal halide lamps.
- They incorporate a thermal protection chip. They offer a high efficiency, long duration, comfortable and uniform light based on the reduction of the loss of power and the increase of the luminous efficiency. The lamps start without flashes and provide a stable and quite silent light.
magnetic ballast Tomax 600W
Electromagnetic start-regulating device for sodium and metal halide lamps
This ballast allows the stabilization of the current supplied to the output while guaranteeing a greater stability of the light flow and therefore a longer duration of the lamps. Closed body type for further insulation and safety.
Tomax 600W open ballast - magnetic
Ballast with a rated power of 600 W. Appropriate for High Pressure Sodium and Metal Halide bulbs.
Quality Lighting Ballast
This ballast allows the stabilization of the current supplied in output at the same time guarantees a greater stability of the luminous flux and consequently a greater duration of the lamps. Open body.
Suitable for the lighting of bulbs HPS and MH 600W.
- output is 600w or more
- works with both HPs and MH lamps
- Easily mountable
- Long strike distance to the lamp up to 15m
- thermal cutouts to protect against short circuits
- pre-wired input and output cable
- CE certified
- 18months warranty
Nanolux e-ballast HPS/MH 1000W
This is the most effective digital ballast on the market!
Nanolux e-ballast HPS/MH 600W
This is the most effective digital ballast on the market!
Powers two 600 watt bulbs or fixtures at the same time from a single outlet. Separate on/off switches and dimmers for each output; choose between running only one lamp or two. Works with all lamps and features Improved RF shielding. This is the ideal ballast to use with the Horizon Dual Socket Super Nova Reflector.
This ballast is also dimmable, it can run at 50% or 75% of full power. Adjustments are done by dials located on the top of the unit, it features a gradual dim that eases your bulb into the lower or higher wattage. The Nanolux 600w Dimmable Dual Ballast is ideal for use with either two reflectors in close proximity or with a dual bulb reflector setup.
- 600W
- Input Voltage: 120-240
- Input Current: 5.2/2.6A
- Bulb: SE
- Dimming Settings: 110%, 100%, 75%, 50%
- PF: >0.99
- THDI: <10%
- CF: <1.7
- Input Frequency: 50/60
- 3 Year Bumper to Bumper Warranty
Lumatek Twin 600W 240V Dimmable
Lumatek digital dimmers offer the most advanced technology on the greenhouse lighting market.
Compact and completely silent, they have the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the lamp model used and its condition, as well as to the mains voltage. The Lumatek Twin 600W 240 V is an adjustable, electronic ballast designed for use with one or two 600W and/or 400W 240V HPS and MH plant lamps.
Lumatek 1000W dimmable
Digital Ballast Lumatek provides the most advanced technology on the market for greenhouse lighting.
Compact and completely silent, it has the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the model's lamp and its condition as well as to network's voltage. Lumatek Twin 600W 240 V is adjustable, electronic ballast for use with one or two 600W and / or 400W 240V HPS and MH lamps for plants.
Why Digital Ballasts?
- More Lumen Output - Up to 20% more lumens output than some old style magnetic ballasts ...More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard to try to keep up with Lumatek’s lumen output.
- Stable Light Output - Excellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.
- Fast Start-up - It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes.
- Completely Silent - No noise or vibration of any kind
- Produce Less Heat - Less heat generated by the ballasts allows cooler running of the environment. Less heat is less wasted electricity.
- Longer Bulb Life - Lumen output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.
LUMATEK 1000W AC DIGITAL BALLAST FEATURES:
- Runs 400W, 600W and 1,000 MH or HPS lamps
- Fully Dimmable
- Staggered Ignition Technology (will light multiple bulbs in a sequence)
- Super Lumens feature for 1000+ watt operation
- Whisper quiet fan and lightweight
- Dual-Voltage with the same light output on 120V or 240V @ 50/60 Hz
- Input Power: 1030w, Ouput Power: 1000w
- Power Factor: >0.99
- Voltage Range: 108 to 264v
- THD: <8%
- Environment Temperatures: -25 to 50 C (-13 to 122 F)
- FCC compliant, ETL listed
Lumatek NXE 600W
Digital Ballast Lumatek provides the most advanced technology on the market for greenhouse lighting.
Compact and completely silent, it has the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the model's lamp and its condition as well as to network's voltage.Lumatek Twin 600W 240 V is adjustable, electronic ballast for use with one or two 600W and / or 400W 240V HPS and MH lamps for plants.
Why Digital Ballasts?
- More Lumen Output - Up to 20% more lumens output than some old style magnetic ballasts ...More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard to try to keep up with Lumatek’s lumen output.
- Stable Light Output - Excellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.
- Fast Start-up - It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes.
- Completely Silent - No noise or vibration of any kind
- Produce Less Heat - Less heat generated by the ballasts allows cooler running of the environment. Less heat is less wasted electricity.
- Longer Bulb Life - Lumen output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.
Lumatek NXE 400W
Compact and completely silent, it has the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the model's lamp and its condition as well as to network's voltage.Lumatek Twin 600W 240 V is adjustable, electronic ballast for use with one or two 600W and / or 400W 240V HPS and MH lamps for plants.
Why Digital Ballasts?
- More Lumen Output - Up to 20% more lumens output than some old style magnetic ballasts ...More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard to try to keep up with Lumatek’s lumen output.
- Stable Light Output - Excellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.
- Fast Start-up - It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes.
- Completely Silent - No noise or vibration of any kind
- Produce Less Heat - Less heat generated by the ballasts allows cooler running of the environment. Less heat is less wasted electricity.
- Longer Bulb Life - Lumen output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.
- Electronic ballast for 250W or 400W HPS or MH lamp
- Voltage: 230V 50/60Hz
- Current: 1.90A
- Input power: 440W
- Output power: 420W
- Power factor: >0.99
- Voltage range: 175~275V
- THD: <8%
- Lamp CCF: <1.7
- Operating Frequency: high frequency
- No audible noise, no flicker
- Env. temp.: -25~50°C(-13~122°F)
- Enclosure temp. rise ((Δt) 29°C (84.2°F)
- Env.IP require: >IP23
INSTRUCTIONS:
- To light a 250W lamp; set control to 250W and boost output by 10% by switching to 250SL.
- To light a 400W lamp; set control to 400W and boost output by 10% by switching to 400SL or dim down to 250SL or 250W.
Lumii Digita ECO 1000W
More light output per watt of energy consumed
Ultra quiet!
Ultra compact and cooler operation
Ultra lightweight
Lumii Digita ECO 600W
More light output per watt of energy consumed
Ultra quiet!
Ultra compact and cooler operation
Ultra lightweight
Lumii Digita ECO 400W
More light output per watt of energy consumed
Ultra quiet!
Ultra compact and cooler operation
Ultra lightweight
Lumii Black ballast 600W
Lumii Black 600w Digital Ballast 250w-660w
This 600w Electronic Ballast is supplied as a stand-alone ballast with a flying IEC lead so you can add any reflector fitted with an IEC socket to start growing. The ballast features both dim and boost functions, having the ability to control the light output from the lamp.
The ballast features both dim and boost functions, having the ability to control the light output from the lamp. There are two dimmable options (250w & 400w) and a ‘super-lumens’ boost option (600w+Boost) which is on average an extra 10% increase in output.
For best results, always use the correct lamp per wattage setting
Compact DIMMABLE 1000W pPowerlux Line
Digital ballast 1000 W
Economical, slim and compact! Made of quality materials with built-in dynamometer and power regulator. It can work with HPS and MH lamps. It is quiet and thanks to the material made it does not heat up. With a 600-watt bulb you can control the transformer in 4 modes: 600W, 750W, 1000W and Super Lumens, delivering 10% extra light in excess of the magnetic chokes.
Compact DIMMABLE 600W pPowerlux Line
Digital ballast 600 W
Economical, slim and compact! Made of quality materials with built-in dynamometer and power regulator. It can work with HPS and MH lamps. It is quiet and thanks to the material made it does not heat up. With a 600-watt bulb you can control the transformer in 4 modes: 250W, 400W, 600W and 600W Super Lumens, delivering 10% extra light in excess of the magnetic chokes.
GSE dim 250W-660W
GSE electronic ballast can manage all kind of MH metal highlight and HPS high pressure sodium bulbs at 250-400-600W.
A UV- acid- and waterproof foil build in LED indicate the status and on 3knobs you can change the wattage. By steps from 660W-600W-400W-250W or with push and hold even step less from 660W to 250W. GSE uses only finest high quality components such as aluminium casted long live and high temperature electrolytic capacitor, transistors PhilipsNXP, high frequency ISKRA components etc... and source >84% EU manufactured components.
A extremely big-surface aluminium radiator keeps the running temperature low and provides a long life of the components. The high frequecy above 80kHz to 220kHz avoids acustic resonance of the bulb. The ballast comes as a finish assembled product with 3m connector cable and 4m lamp cable to connect to the reflector E40. It is all waterproof sealed and have IP64 protection class.
Elektrox Ultimate 600W ballast
Higher efficiency - more light for your plants. Allows quick lighting of the bulb, saving energy. Quieter than any other throttle.
- 4 power modes 250/400/600/660 W
- Adjustable ballast for 600 W HID bulbs
- Unique design for more efficient cooling
- Protection class IP 54
- Up to 15% more lumen
- Silent
The ballasts regulate the voltage supplied to the selected lamp, to the working lamp and to ignite the lamp, creating a high-voltage pulse after the interruption of the starter current. They are divided into two types - electromagnetic and electronic ballast. The difference between the two is that the electronic ballast does not require a starter and is usually lighter and less heated. Other advantages are the quieter operation of the conventional throttle, the increase in lamp life by 30% - 50% and the reduced pulsations of light output.
Electronic ballasts alter the flow of light bulb current using a series of induction coils that are separated from each other. Unlike magnetic ballasts, they use an induction coil rather than a series of coils. The impulse delivered from the ballast to the lamp is faster, which reduces the energy consumption. Electronic chokes do not heat up during operation.
Compact DIMMABLE 600W dimmable ballast
Digital 600W Digital Ballast
New economic ballast, slim and compact.Made of quality materials, with built-in dynamometer, Watt regulator.HPS and MH lamps can work with this oneIt is silent and thanks to its construction material, it is not heated.
With a 600-watt light bulb, you can operate the transformer on 4 modes, 250W, 400W, 600W, and 600W Super Lumens, delivering 10% extra light from the magnetic transformers.
Master Gear eb600son 600W
The electronic version of Master gear has high power factor, lower power loss, open output circuit and short circuit protection.
The output power varies +/- 3% when the input voltage varies between 20% and 18%. Lamp voltage varies within ANSI standards. Stable output power, can increase lamp life by 30% and reduce color temperature deviation. Easy installation!
- Lamp Type: High Pressure Sodium Lamps
- Rated power: 600W
- Length: 355 mm
- Width: 150 mm
- Height: 90 mm
The chokes (ballasts) regulate the voltage supplied to the selected lamp, to the operating voltage for it and ignite the lamp, creating a high-voltage pulse after the interruption of the current from the starter. They are divided into two types - electromagnetic and electronic ballast. The difference between the two is that the electronic ballast does not require a starter and is usually lighter and heats up less. Other benefits are quieter operation than a conventional ballast, an increase in lamp life by 30% - 50% and reduced light flux pulsations.