fan controller

The minimum speed controller is a temperature dependent controller for ventilated rooms with one or more fans.

Dimensions and technical specification:
Body: WxHxD= 130x92x105mm
Controller: WxHxD = 160x130x105mm
Developed for: 10A / 2300W / Triac 2x16A
Voltage: 230V / 50HZ
Digital sensor 5V measures temperature from –55°C to +125°C (–67°F to +257°F)
0.5°C with accuracy from –10°C to +85°C
Protection class: IP54

The SMSCOM fan controller is ideal for dimming down your intake or exhaust fan.

The system ensures a constant air flow. With the left dial you can pre-set your fan on a minimum speed it will run at, in order to operate more efficiently, stealthily and with greater control over temperature and humidity. 

THE SMARTEST FAN CONTROLLER ON THE MARKET

When used as fan controller:

The fancontroller works as a manually adjustable dimmer. You can set the fan speed with the left control knob. Just plug your fan into the controller - ready to go! 

Attention!

• The right control knob has got no function, until a temperature sensor is plugged in!
• Use as Smart Controller (you need the temperature sensor):
• After you connected the fan controller with the temperature sensor, you can set the desired room temperature with the right control knob. The smart controller automatically adjusts the fans speed, to ensure that the set temperature is satisfied.
• If the temperature in the room decreases below the set temperature, the fan will decrease down to the set minimum speed on the left dial. Perfect for nighttime temperature fluctuations! 
• The SMSCOM Smart Controller is a powerful little unit that has thermostat controlled Motion Flow technology to continuously regulate the room. The smart sensor technology continuously measures the temperature of the room and regulates the fan speed accordingly, keeping your plants happier and also reducing electricity bills!

• Plug and play, no wiring necessary
• Made in Holland
• Max load 6.5 amp
• Very smooth fan speed adjustment
• Reduced power consumption
• Increased energy efficiency in your production cultivation

Smart controller sensor

• length: 3m
• amperage: 6.5A

Humidity and temperature controller for intake and exhaust air fan with additional 2 programmable outputs and LCD display

Hardware:

• 2pcs. Variable outputs for fans
• 2pcs. Programmable outputs for appliances
• 1pcs. Temperature and humidity sensors with light detector (air)
• 1pcs. Temperature Sensor (Waterproof)

The 16A ventilation controller is built from a solid very robust aluminium housing. It can control up to 2200W power per outlet. In addition to a conventional temperature and humidity variable control the 16A controller carries 2pcs individual programmable outlet sockets. These can be assigned to one of the two sensors or be controlled by a timer function. Particularly attractive is the huge number of parameters that can be set for day/night individually to fulfill all desired requirements. The controller carries two transistor outputs for fans (phase control) and parallel working internally two 0-10V outputs.

Depending on the version, the controller is equipped with a USB port for data logging. All relevant measurement data and control signals get written on a CSV file to the USB stick, later they can get evaluated in an Excel application. The 16A controller has a free slot for a pressure sensor to control the intake air fan depending on the pressure difference.

The device has a protection fuse of 16A, which is considered as maximum allowable load for the entire controller. Each single output can carry max. 2200W per socket and all outputs together have a max. load of 3600W/16A. The device comes with a 2m connection cable to connect to a conventional household outlet of 230V/16A. The sensors are supplied with a 4m long cable which can be expanded up to 10m. A digital display and four navigation keys provide easy navigation in the Menuand 6LED lights are indicating the current switching status.

Among other things, settings such as display functions, memory frequency and languages, English, German, French, Spanish and Italian, can be selected.

Sizes and technical data:

• Case: WxHxD = 120x180x80mm
• Controller: WxHxD = 150x210x110mm
• Voltage: 230V / 50Hz / I max: 16A / 3600W
• Humidity and temperature sensor: 5V, measures temperatures from -55°C to + 125°C (-67°F to 257°F) Accuracy 0.5°C from -10°C to + 85°C Humidity Accuracy ± 4.5% rh
• Temperature sensor: 5V, measures temperatures from -55°C to + 125°C (-67°F to + 257°F)
• Accuracy 0.5°C from -10°C to + 85°C
• Protection class: IP54

This EC fan controller have temperature, humidity and minimum speed setting on three knobs.

It is easy to use. The EC fan controller get supplied with a 4m long cable with a 3.5mm 4pole stereo jack connector to the fan and a 4m long Temperature senor.  It comes as a finish product together with a power supply. The eutput signal is 0-10V or on demand a PWM (pulse wide modulation) signal. If the EC-fan suppolt PWM signal the controller is able to run without power supply.

Settings range:
Temperature: 20C° to 30C°
Humidity: 30% - 100%
Minimum speed: off, 20% to -100%

This EC fan controller have temperature, minimum- and maximum speed setting on three knobs. It is easy to use.

The EC fan controller get supplied with a 4m long cable including a 3.5mm 4pole stereo jack connector to the fan and a 4m long Temperature senor.  It comes as a finish product together with a power supply. The eutput signal is 0-10V or on demand a PWM (pulse wide modulation) signal. If the EC-fan support a PWM signal the controller is able to run without power supply.

Settings range:

• Temperature: 20C° to 30C°
• Minimum speed: off, 20% to -100%
• Maximum speed: 100% to -50%

EC LCD controller for 2fans

This EC fan controller with LCD display, keyboard and power led allows a very easy setting and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and rounds per minute of the exhaust fan. A built in light sensor in the probe recognize day/night modes. The EC fan controller comes with power adaptor 1m cable, a 4m sensor cable and 2x 4m fan cable including all connectors 4pole 3.5mm jack. It ready to use.

You can program 15 individual settings with only three buttons

Features:
-Temperature day
-Temperature hysteresis day
-Humidity day
-Humidity hysteresis day
-Minimum speed day
-Maximum speed day
-Temperature night
-Temperature hysteresis night
-Humidity night
-Humidity hysteresis night
-Minimum speed night
-Maximum speed night
-Negative pressure setting
-Switch sensor level
-Switch over time day/night

LCD display:
-Graphic and digital display of speed rpm constant
-Temperature display constant
-Humidity display constant
-Set point selectable not constant, over input keys

AC-EC LCD fan controller for 2fans 2x5A

This AC-EC fan controller with LCD display, a rotary push knob allows a very fast setting of all the values and reading of all the information's given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and RPM (rounds per minute) of the EC-exhaust fan. A built in light sensor in the probe recognise day/night modes. Two 5A/230V AC exits for intake and exhaust fan, in parallel you have 2xRJ45 connector and you can choose between 0-10V or PWM (pulse wide modulation) signal.

2 internal temperature sensors prevent from overheating on the heat sink and processor side. The AC-EC fan controller comes with power cable 1.5m, 4m sensor cable. It is ready to use. You can program 15 individual settings with rotary push button.

Features:

-Temperature day
-Temperature hysteresis day
-Humidity day
-Humidity hysteresis day
-Minimum speed day
-Maximum speed day
-Temperature night
-Temperature hysteresis night
-Humidity night
-Humidity hysteresis night
-Minimum speed night
-Maximum speed night
-Negative pressure setting
-Switch sensor level
-Switch over time day/night

LCD display:

-Graphic and digital display of speed rpm constant
-Temperature display constant
-Humidity display constant
-Set point selectable not constant, over input keys

The SMSCOM Smart Controller is a compact ventilation controller in a plug housing.

Maximum current is 6.5 amperes. The SMSCOM Smart Controller is electronically controlled and provides a simple, accurate method for the correct temperature of your room (NTC* needs to be attached). The SMSCOM Smart Controller continuously regulates the correct speed for your fans and reserves the right temperature.

Control your indoor climate effectively with TechGrow’s Clima Control

The Clima Control lets you connect two fans at the same time. It features the very clear, concise menu you are familiar with and which also allows you to read out min/max values on the display. Because of its simple menus and its handy Push & Turn Button, the Clima Control is easy to use by anyone and everyone. The unique calibration menu enables you to determine how much power is needed for 10% speed and 90% speed for adjusting every box, regardless of its size.

The Clima Control only controls temperature, however, it can also display values of other connected sensors. Compatible with many other TechGrow devices.
Available in 4.5A, 7A and 14A versions.

Features:

• The Clima Control can measure, display and register min/max values of connected CO2, humidity-, and temperature sensors.
• All settings are saved in case of power outages.
• Display shows min/max values of its connected sensor(s).
• The display is refreshed every second.
• LED indicator for light detection and stable climate.
• The fan can be operated automatically or manually.
• The fan-control is adjustable in steps of 10%.
• Includes a unique feature where the fan can be adjusted in two simple steps.
• Features a unique calibration menu for adjusting every box, regardless of the size.
• Automatically turns off the backlight of the display after 60 seconds.
• Automatically detects broken cable or bad connection of the connected sensors.
• Connecting the sensor is done with a standard network cable (UTP).
• Available in 4.5A, 7A en 14A versions.
• Connectable to multiple TechGrow devices.
• Multiple sensors are seperately available.
• Possibility to connect the Techgrow Datalogger (DL-1).

Control your indoor climate effectively with TechGrow’s Clima Control

The Clima Control lets you connect two fans at the same time. It features the very clear, concise menu you are familiar with and which also allows you to read out min/max values on the display. Because of its simple menus and its handy Push & Turn Button, the Clima Control is easy to use by anyone and everyone. The unique calibration menu enables you to determine how much power is needed for 10% speed and 90% speed for adjusting every box, regardless of its size.

The Clima Control only controls temperature, however, it can also display values of other connected sensors. Compatible with many other TechGrow devices.
Available in 4.5A, 7A and 14A versions.

Features:

• The Clima Control can measure, display and register min/max values of connected CO2, humidity-, and temperature sensors.
• All settings are saved in case of power outages.
• Display shows min/max values of its connected sensor(s).
• The display is refreshed every second.
• LED indicator for light detection and stable climate.
• The fan can be operated automatically or manually.
• The fan-control is adjustable in steps of 10%.
• Includes a unique feature where the fan can be adjusted in two simple steps.
• Features a unique calibration menu for adjusting every box, regardless of the size.
• Automatically turns off the backlight of the display after 60 seconds.
• Automatically detects broken cable or bad connection of the connected sensors.
• Connecting the sensor is done with a standard network cable (UTP).
• Available in 4.5A, 7A en 14A versions.
• Connectable to multiple TechGrow devices.
• Multiple sensors are seperately available.
• Possibility to connect the Techgrow Datalogger (DL-1).

Controlling your indoor climate with the TechGrow Clima Control Basic is a breeze.

Setting the Clima Control Basic is a snap with its handy rotary buttons. Its simple appearance is misleading as the Clima Control Basic is packed with the reliable and advanced TechGrow technology you are used to.

This controller comes with a pre-mounted temperature probe on a 4.5 meter (15ft) cable.

Features:

• Plug & Play.
• Adjustment range temperature: 10.0 – 45.0 C.
• Adjustment range temperature hysteresis: 1.0 – 7.0 C.
• Available in 4,5A, 7A en 14A versions.
• Power supply: 110V to 240V.
• Adjustable minimum and maximum fan power.
• Pre-mounted temperature probe on a 4.5 meter cable.(15ft)
• Easy to connect.
• Rotary buttons for simple adjustments of settings.
• The fan can be operated automatically or manually.

Controlling your indoor climate with the TechGrow Clima Control Basic is a breeze.

Setting the Clima Control Basic is a snap with its handy rotary buttons. Its simple appearance is misleading as the Clima Control Basic is packed with the reliable and advanced TechGrow technology you are used to.

This controller comes with a pre-mounted temperature probe on a 4.5 meter (15ft) cable.

Features:

• Plug & Play.
• Adjustment range temperature: 10.0 – 45.0 C.
• Adjustment range temperature hysteresis: 1.0 – 7.0 C.
• Available in 4,5A, 7A en 14A versions.
• Power supply: 110V to 240V.
• Adjustable minimum and maximum fan power.
• Pre-mounted temperature probe on a 4.5 meter cable.(15ft)
• Easy to connect.
• Rotary buttons for simple adjustments of settings.
• The fan can be operated automatically or manually.

Controlling your indoor climate with the TechGrow Clima Control Basic Plus is simple but effective.

Setting the Clima Control Basic Plus is a snap with its handy rotary buttons. Its simple appearance is misleading as the Clima Control Basic Plus is packed with the reliable and advanced TechGrow technology you are used to.

The bright green LED display shows the current temperature, and the set-point while adjusting.This controller comes with a pre-mounted temperature probe on a 4.5 meter (15ft) cable.

Features:

• Plug & Play.
•  LED display for set point and current temperature.
•  Very easy to operate.
• Adjustment range temperature: 10.0 – 45.0 C.
• Adjustment range temperature hysteresis: 1.0 – 7.0 C.
• Adjustable minimum en maximum fan power.
• Pre-mounted temperature probe on a 4.5 meter cable.(15ft.)
• Analog control buttons for simple adjustments of settings.
• Two sockets for fans.
• Easy to connect.
• Easy to replace Fuse.
• Spare fuse included.
• Available in 4.5A, 7A and 14A versions.
• Power supply: 110V to 240V.

Controlling your indoor climate with the TechGrow Clima Control Basic Plus is simple but effective.

Setting the Clima Control Basic Plus is a snap with its handy rotary buttons. Its simple appearance is misleading as the Clima Control Basic Plus is packed with the reliable and advanced TechGrow technology you are used to.

The bright green LED display shows the current temperature, and the set-point while adjusting.This controller comes with a pre-mounted temperature probe on a 4.5 meter (15ft) cable.

Features:

• Plug & Play.
•  LED display for set point and current temperature.
•  Very easy to operate.
• Adjustment range temperature: 10.0 – 45.0 C.
• Adjustment range temperature hysteresis: 1.0 – 7.0 C.
• Adjustable minimum en maximum fan power.
• Pre-mounted temperature probe on a 4.5 meter cable.(15ft.)
• Analog control buttons for simple adjustments of settings.
• Two sockets for fans.
• Easy to connect.
• Easy to replace Fuse.
• Spare fuse included.
• Available in 4.5A, 7A and 14A versions.
• Power supply: 110V to 240V.

Step Transformer controller is specific in that the fans are not a noise (howling) at low speed.

Step transformers determines the speed of the fan alone using a 6-degrees up / down depending on humidity and temperature. The temperature and hysteresis (sensitivity) can be set on the two buttons, as well as humidity and moisture-hysteresis of the other two buttons. The controller comes assembled in waterproof housing compatible main contact and 4m cable with a light sensor that detects day / night time, which makes it the perfect controller.

Sizes and technical data:

• Packaging: 200x250x180mm
• Controller: 265x300x205mm
• Intended for: 8A (2 fans)
• Volta prim: 230V / 50Hz
• Volta sec. 80V, 110V, 140V, 170V, 200V, 230V AUTOMATIC steps 50HZ
• Digital sensor 5V measures temperatures from -55 ° C to + 125 ° C (-67 ° F to + 257 ° F)
• 0.5 ° C accuracy from -10 ° C to + 85 ° C
• Humidity accuracy ± 4,5% RH
• Class of protection: IP44

Step Transformer controller is specific in that the fans are not a noise (howling) at low speed.

Step transformers determines the speed of the fan alone using a 6-degrees up / down depending on humidity and temperature. The temperature and hysteresis (sensitivity) can be set on the two buttons, as well as humidity and moisture-hysteresis of the other two buttons. The controller comes assembled in waterproof housing compatible main contact and 4m cable with a light sensor that detects day / night time, which makes it the perfect controller.

Sizes and technical data:

• Controller: WxHxD = 265x300x205mm
• Intended for:  8A/1800W
• Volta prim: 230V / 50Hz
• Volta sec. 80V, 110V, 140V, 170V, 200V, 230V AUTOMATIC steps 50HZ
• Digital sensor 5V measures temperatures from -55 ° C to + 125 ° C (-67 ° F to + 257 ° F)
• 0.5 ° C accuracy from -10 ° C to + 85 ° C
• Humidity accuracy ± 4,5% RH
• Protection class IP54

Step Transformer controller is specific in that the fans are not a noise (howling) at low speed.

Step transformers determines the speed of the fan alone using a 6-degrees up / down depending on humidity and temperature. The temperature and hysteresis (sensitivity) can be set on the two buttons, as well as humidity and moisture-hysteresis of the other two buttons.The controller is waterproof housing compatible main contact and 4m cable with a light sensor that detects day / night time, which makes it the perfect controller

Technical data:

• Case: WxHxD = 200x250x180mm
• Kontroller: WxHxD = 265x300x205mm
• Intended for: 2,5A (2 fans)
• Volta prim: 230V / 50Hz
• Volta sec. 80V, 110V, 140V, 170V, 200V, 230V AUTOMATIC steps 50HZ
• Digital sensor 5V measures temperatures from -55 ° C to + 125 ° C (-67 ° F to + 257 ° F)
• Аccuracy from -10 ° C to + 85 ° C
• Humidity accuracy ± 4,5% RH
• Protection class IP54

With this controller your space will be continuously under control and the air flow will be depending on the temperature.

This digital temperature, minimum-, maximum- speed controller with hysteresis setting is a temperature depended speed controller for ventilated rooms with one or more exhaust fans (up to 600 watt).

The controller keeps the temperature constantly and impedes to run under the set minimum-speed, as well to run over the set maximum speed. The hysteresis defines the temperature range. It can be easily controlled, adjusting the required temperature minimum-, maximum speed and hysteresis on four knobs.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x90mm
• Designed for: 10A 2300W
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class: IP54

The GSE digital temperature controller, minimum, maximum speed, with hysteresis adjustment, is a temperature-dependent speed controller, for ventilated rooms with one or more fans.

Dimensions and technical specification:
Body: WxHxD= 130x92x105mm
Controller: WxHxD= 160x130x105mm
Developed for: 10A / 2300W / Triac 1x16A
Voltage: 230V / 50HZ
Digital sensor 5V Measures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Protection class: IP54

The digital fan controller is a humidity and temperature dependent controller for rooms with incoming and outgoing air.

Dimensions and technical specification:
Body: WxHxD= 130x92x105mm
Controller: WxHxD = 160x130x105mm
Developed for: 10A / 2x1'150W / Triac 2x16A
Voltage: 230V / 50HZ
Digital sensor 5V measures temperature from –55°C to +125°C (–67°F to +257°F)
0.5°C with accuracy from –10°C to +85°C
Humidity accuracy +/-3%RH maximum tolerance @55%RH
Protection class: IP54

This digital fan controller is a temperature dependent speed controller for rooms with intake and exhaust fans.

The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x100mm
• Designed for: 2x5A / 2x1150W (2300W) / TRIAC 2x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class IP54