ph controller

The light is necessary for the development of the plants.

In fact, it is necessary a sufficient contribution of light in order to favor the photosynthesis and the closing of the plants. The supplement of light by means of lamps electrical workers is the method simpler and economic in order to bring the necessary light to the plants.

MW700 is a portable Lux meter designed to perform light measurements. It is supplied with a light sensor connected to the meter that measures from 0 to 50000 Lux. Average indoor lighting ranges from 100 to 1000 Lux and average outdoor sun lights about 50000 Lux. Lux is a unit that indicates the density of light that falls on a surface.

The MW700-WP is a portable Lux meter designed to perform light measurements. The instrument is supplied in a hard carrying case complete with a light sensor connected to the meter that measures from 0 to 50000 Lux. The light sensor is waterproof, suitable to verify the light intensity also at the bottom of your aquarium. The accuracy is ±6% of reading (full scale). The MW700-WP works with a 9V alkaline battery. Automatic shut-off after 10 minutes saves battery and extends Lux meter life.

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir.

An LED alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and calibration solution.

• Professional pH monitor especially designed for use with aquariums.
• User selectable Hi/Low Set Point 
• Manual 2 points calibration 
• Visual LED alarm 
• Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution 
• Double junction pH electrode with 2m cable (BNC connector)

pH monitor for constant monitoring of hydroponic or fertilizer solutions, aquariums and aquaponic systems, pools, etc.

Convenient function for visual indication when the pH of the solution passes a set value (up or down, selectable by knob). The MC122 controller and dosing pump (MP810) provide fully automated pH control of aqueous solutions in hydroponic systems. It is specially designed for pH management in tanks containing nutrient solution. The small and precise flow of the peristaltic pump allows to maintain ideal pH values in your tank.

After selecting the desired pH setting (from 5.5-9.5), the controller measures the pH value of the solution and automatically adds a pH correction (acids or bases) to adjust the pH of the liquid to the selected level. Manual calibration at 2 fixed points - pH 4 and pH 7. Separately connectable sensor, compatible with pH-monitors of other manufacturers.

Professional pH-monitor for long-term use

The devices of the MS series are designed for constant monitoring of pH, EC or TDS values, directly in the tank. Each unit has a mode selection that is set by the user. The LED indicator activates and starts flashing when the pH, EC or TDS level changes above or below (user selected) the set value.

The pH-monitor for constant monitoring of hydroponic or fertilizer solutions , aquariums and aquaponic systems, pools, etc. has a convenient function for visual indication when the pH of the solution passes a set (by the grower) value (up or down, as selected by a knob).

• Manual calibration at 2 fixed points - pH 4 and pH 7.
• Separately connectable sensor compatible with pH monitors of other manufacturers.
• LED alarm
• Supplied with 12 VDC adapter, mounting kit and 20ml pH 7.01 calibration solution
• Dual, cruciform pH electrode with two meter cable (BNC connector)

Manufacturer's warranty - 2 years for the device, 6 months for the sensor. Does not apply to mechanical damage and improper operation!