Ventilation and Climate

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

An insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing.

Insulated hose to dampen the sound and light.

This hose has an aluminum inner hose covered with foil, is 25mm insulated with glass wool and has an aluminum outer casing

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø100mm / L=900mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø125mm / L=900mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø150mm / L=1000mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø160mm / L=1000mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø200mm / L=1000mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø250mm / L=1000mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø315mm / L=1000mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø355mm / L=1000mm

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø400mm / L=1000mm

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

• Developed for direct mounting on wheel, provided with winding class B (thermal protection).
• Class C ball bearings with pre-pressed grease lubrication.
• Because the electric motor is in the cochlea, it is optimally cooled.
• Built-in thermal protection (in case of overload, the fan is switched off immediately). Technical data:
• Supply voltage: 1 / phase 220-240V.
• Operating temperature: -30ºC to + 50ºC.
• Airflow: 1500-1570.
• Amperage: 1.6. Amp
• Wattage: 147W
• Flange inlet: Ø250mm
• Flange outlet: Ø250mm

The fan is covered by a warranty for defects for a period of 5years from the date of purchase. During this period, the appliance may be returned to the seller with proof of purchase (cash receipt). If a defect is detected, it will be repaired or replaced.

This warranty does NOT cover abusive use of the appliance, accidental damage (fading, wetting), repairs by unauthorized persons and incorporating spare parts from a different manifacurer. 

Noise-isolating fan in an MDF box. Draws warm and moist air from growing areas.

The fan should be sized for an airflow 30 to 50 times the volume of your grow room. You can then effectively control the fan speed with other devices depending on the temperature and humidity. You will not only use the full potential of the Airfan, but also further reduce possible noise to a minimum.

The ISO-BOX 1500 m3/h fan is mounted in MDF boards with insulating foam that covers the interior and thus reduces the noise produced by the fan.

Features:

• Connections: 2x 250 mm (IN / OUT)
• Capacity: 1500m³ / h
• Speed range (m3 / h): 300 - 1520
• Power supply: 230 v / 50 Hz
• Power: 414W
• Noise level (dB): 36.7
• Temperature range: -30°C to +70°C
• Protection class: IP44

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

• Electric motor of the type of motors with external pole.
• Longer life due to compact design.
• Developed for direct wheel mounting, equipped with winding class B (thermal protection).
• Class C ball bearings with pre-lubricated grease.
• Built-in thermal protection (in case of overload, the fan switches off immediately).
• Supply voltage: 1 / phase 220-240V.
• Operating temperature: -30ºC to + 50ºC.
• Current: 2.5 A
• Power: 245W
• Flange inlet: Ø250mm
• Flange outlet: Ø250mm
•  

The fan is covered by a warranty for defects for a period of 5years from the date of purchase. During this period, the appliance may be returned to the seller with proof of purchase (cash receipt). If a defect is detected, it will be repaired or replaced.

This warranty does NOT cover abusive use of the appliance, accidental damage (fading, wetting), repairs by unauthorized persons and incorporating spare parts from a different manifacurer. 

Noise-insulated centrifugal fan in a plywood case

Powerful and extremely quiet due to its MDF acoustic enclosure. The motor is of the famous brand Torin-Sifan, who are well known for their quality and reliability. The material of the housing is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and elastics for hanging.

- Suitable outlet fan for rooms with dimensions of about 20 sq.m.

- A suitable filter for this fan can be found here .

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

• Supply voltage: 1 / phase 220-240V.
• Operating temperature: -30ºC to + 50ºC.
• Air flow: 3250-3430.
• Current: 5.73A
• Power: 420W
• Flange inlet: Ø250mm
• Flange outlet: Ø315mm

AIRFAN® SOFT BOX consists of a centrifugal fan and an MDF box. The enclosure is soundproofed with an internal coating of high-quality and durable insulating foam to minimize noise production. Since the fans are protected thanks to rubber rings, the fan has no direct contact with the frame, so it does not transmit any vibrations. These devices are designed to operate at high pressure, emitting as little noise as possible. Connections are designed for round pipes and pipelines.

Features:

• Connections: 2x 315 mm (IN / OUT)
• Capacity: 3250m³ / h
• Power supply: 230 V, 50 Hz
• Power: 1265W
• Noise level: 46 dB
• Thanks to the sound insulation inside and the use of rubber suspension handles, the fan works very quietly

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

• Longer life due to compact design.
• Designed for direct mounting of a wheel equipped with a winding class B (thermal protection).
• Class C ball bearings with pre-lubricated grease.
• Built-in thermal protection (in case of overload, the fan shuts off immediately).
• Supply voltage: 1 / 220-240V phase.
• Operating temperature: -30ºC to + 50ºC.
• Air flow: 4250-4470.
• Voltage: 8A
• Power: 550W
• Flange inlet: 2x Ø250mm
• Flange outlet: Ø315mm

The fan is covered by a warranty for defects for a period of 5years from the date of purchase. During this period, the appliance may be returned to the seller with proof of purchase (cash receipt). If a defect is detected, it will be repaired or replaced.

This warranty does NOT cover abusive use of the appliance, accidental damage (fading, wetting), repairs by unauthorized persons and incorporating spare parts from a different manifacurer. 

AIRFAN® SOFT BOX consists of a centrifugal fan and an MDF box. The enclosure is soundproofed with an internal coating of high-quality and durable insulating foam to minimize noise production. Since the fans are protected thanks to rubber rings, the fan has no direct contact with the frame, so it does not transmit any vibrations. These devices are designed to operate at high pressure, emitting as little noise as possible. Connections are designed for round pipes and pipelines.

Features:

• Output: 1x315mm
• Input: 2x250mm
• Power: 550W
• Speed range (m3 / h): 700 - 3600
• Consumption (W): 598 - 1334
• Noise level (dB): 37.2
• Supply voltage: 1-phase 220 / 240V - 50Hz
• Temperature range: -30°C to +70°C
• Protection class: IP44

Noise-isolating fan in an MDF box. Draws warm and moist air from growing areas.

The fan should be sized for an airflow 30 to 50 times the volume of your grow room. You can then effectively control the fan speed with other devices depending on the temperature and humidity. You will not only use the full potential of the Airfan, but also further reduce possible noise to a minimum.

The ISO-BOX 6000 m3/h fan is mounted in MDF boards with insulating foam that covers the interior and thus reduces the noise produced by the fan.

Features:

• Flange inlet: 2xØ315mm
• Outlet for flange: Ø405mm
• Capacity: 6000m³ / h
• Power supply: 230 v / 50 Hz
• Power: 1100W
• Temperature range: -30°C to +70°C
• Protection class: IP44

suitable outlet fan for rooms with dimensions of about 48 sq.m.

You can find 2 suitable filters for this fan here .

noise-insulated centrifugal fan in the plywood case

Powerful and extremely quiet due to its MDF acoustic housing. The engine is of the famous brand Torin-Sifan, which are well known for their quality and reliability. The material of the case is made of plywood, providing ideal internal insulation. Guaranteed low noise levels and high efficiency, while having the capacity to drive a large volume of air. Supplied with inlet and outlet flanges; hooks and rubber bands for hanging.

• Specially designed for indoor growing

• Cable and plug included, ready to use

• Quiet and easy to use low power

• No grid, fits in metal or flexible ducts

• 100% new ABS plastic; 100% copper oil bearing motor

• Voltage: 220V~

• Frequency: 50Hz

• Power: 12W

• Maximum air flow: 130 m 3 /h

The design of the fan makes it very compact and easy to use, as the fan pipe adapter is integrated into the mounting brackets. It just needs to be installed on the adapter and then tighten the fan with four screws.

•  
• Long life with low power consumption
• 2 YEARS WARRANTY

Max Fan Pro Series - the second generation of Max Fan with an improved 3D rotor-stator system to be more efficient and quieter.

The design of the fan makes it very compact and easy to use, as the fan pipe adapter is integrated into the mounting brackets. It just needs to be installed on the adapter and then tighten the fan with two screws.

The new Max Fan Pro Series-the second generation of Max Fan, is a diagonal fan using the 3D rotor-stator system, which has been improved to be more efficient and more silent.

The design of the fan makes it very compact and easy to use, as the ventilation duct adapter is integrated into the mounting brackets. You just have to mount the adapter first and then fasten the fan with two screws. Due to the 2 steps speed switch, the Max Fan Pro Series is the most inexpensive version to regulate air performance manually.

• Top quality fan.
• Two power levels for optimum performance.
• Silently rotating rotor housed in a sturdy and elegant plastic housing.
• Compact, easy to install, operate and clean.
• 45w
• 220-230V
• 1st speed: 496 m3 / h
• 2nd speed: 615 m3 / h
• 0.3A
• F 160

It has a compact design making it easy to mount and clean.

Perfect for your indoor growroom This powerful inline fan generates fresh air, to help compensate for the hot air being generated from the grow lights inside your growroom.

The Max Fan has a 2 speed switch integrated

• Fan of the highest quality.
• Two power levels for optimum performance.
• A silent 3D rotating 3D rotor, located in a rugged and elegant plastic case.
• Compact, easy to install, operate and clean.
• Long life of the appliance
• 117w
• 220-230V
• 0.6A
• Ф 200
• First gear: 793m3
• Second gear: 1218m3

It has a compact design making it easy to mount and clean.

Perfect for your indoor growroom This powerful inline fan generates fresh air, to help compensate for the hot air being generated from the grow lights inside your growroom.

The Max Fan has a 2 speed switch integrated

• Fan of the highest quality.
• Two power levels for optimum performance.
• A silent 3D rotating 3D rotor, located in a rugged and elegant plastic case.
• Compact, easy to install, operate and clean.
• Long life of the appliance
• 170w
• 220-230V
• 0.8A
• Ф 250
• First gear: 1470m3
• Second gear: 1660m3

Designed to cool both individual electrical components and finished devices with increased heat generation.

All fans have a normalized noise level. A wide range of supply voltages allows the SUNON fans to stand up in any design without using additional power supplies.

Brief technical characteristics:

• RoHS: Yes
• Voltage: AC 230 VAC
• Airflow: 161,41 m3 / h
• Noise: 44 dB
• Bearing type Sleeve
• Power: 22 W
• Static pressure: 8.38 mm H2O
• dimensions 120mmx38mm
• Current mA: 140 mA
• Speed: 2700 RPM
• Type: Axial

COMPLETE DATA SHEET

Can-Fan RK is a plastic tube fan that is speed controllable with a thermal switch to protect the fan's motor and it also delivers a strong air flow with less noise.

• One of Europe's biggest selling fans
• Extractor is speed controllable using voltage or frequency control
• Please note: these fans are not supplied with a plug and must be fitted by a qualified electrician
• The Swiss-made motor, together with the propeller design enables this type of fan to deliver a strong airflow while making less noise
• Equipped with a thermal switch that turns off the motor if it reaches a dangerous working temperature

Can-Fan RK is a plastic tube fan that is speed controllable with a thermal switch to protect the fan's motor and it also delivers a strong air flow with less noise.

• One of Europe's biggest selling fans
• Extractor is speed controllable using voltage or frequency control
• Please note: these fans are not supplied with a plug and must be fitted by a qualified electrician
• The Swiss-made motor, together with the propeller design enables this type of fan to deliver a strong airflow while making less noise
• Equipped with a thermal switch that turns off the motor if it reaches a dangerous working temperature

The CAN Fan RK 125 L pipe fan 370 m³ / h with 125 mm connection and temperature control, is an Axial duct fan manufactured in Switzerland with a motor in a rugged and maintenance-free plastic housing.

The fan is controllable via both the voltage and the frequency.To protect the motor, this fan also has a thermal protection switch which automatically switches off the engine as soon as it reaches an excessively high operating temperature.

The integrated electronic speed control, a desired room temperature can be adjusted via the dial. If this is exceeded, the fan will automatically increase the speed at below the temperature and slows it.

The engine and propeller pitch allow a high airflow with low noise levels.

The fan is controllable via both the voltage and the frequency.

• To protect the motor, this fan also has a thermal protection switch which automatically switches off the engine as soon as it reaches an excessively high operating temperature.
• The integrated electronic speed control, a desired room temperature can be adjusted via the dial. If this is exceeded, the fan will automatically increase the speed at below the temperature and slows it.
• The engine and propeller pitch allow a high airflow with low noise levels.

The CAN Fan RK 160 L pipe fan 810 m³ / h with 160 mm connection and temperature control, is an Axial duct fan manufactured in Switzerland with a motor in a rugged and maintenance-free plastic housing.

The fan is controllable via both the voltage and the frequency.To protect the motor, this fan also has a thermal protection switch which automatically switches off the engine as soon as it reaches an excessively high operating temperature.

The integrated electronic speed control, a desired room temperature can be adjusted via the dial. If this is exceeded, the fan will automatically increase the speed at below the temperature and slows it.

The engine and propeller pitch allow a high airflow with low noise levels.

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

The system of the rotor and stator metal housing and special insulation ensure low weight, high performance and low noise levels.

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

The system of the rotor and stator metal housing and special insulation ensure low weight, high performance and low noise levels.

Specifications:

- flange size: 310mm
- Diameter: 354mm
- length: 700mm
- max power. 300W
- noise levels: at the entrance to 75dB, the exit 75B, in housing 61dB
- Swiss motorbike
- thermal protection
- possibility of adjusting the speed
- easy installation

Iso-Max are a unique series duct fans designed to be effective, powerful and quiet.

The system of the rotor and stator metal housing and special insulation ensure low weight, high performance and low noise levels.