Budmaster II HPS-1 LED Light lamp for growing and flowering
-
Code:2470
-
Weight:1.000 Kgs
With our High Pressure Sunlight (HPS) led grow lights with superior quality German engineering, these Osram led’s really are the best that money can buy with many additional features that come together to bring a truly remarkable end product.
Osram led’s are made in Germany with the highest possible quality standards and controls and are all UL / CUL certified and have many additional features over conventional led.
Budmaster HPS (High Pressure Sunlight) has been designed to give the best of both worlds to growers who wish to grow under a primarily white light source to provide an exceptional lamp that will provide a repeatable yield year on year.
By combining a flat sunlight like peak for all colours and then boosting the primary photosynthesis driving colours of blue and red to ensure maximum photosynthesis and phytochrome stimulation, and course the infra-red has been kept in check to stop your plants stretching too much.
So what’s the difference between the COB and the HPS? The COB is targeted at people who want more coverage and the HPS is for more penetration, also the HPS has a superior red and infra-red peak in comparison to the COB.
- LED's: 19 x Osram SSL80 Horticultural Family
- Coverage: 20 x 40cm
- Energy Used: 40w
- Input Voltage: 100 - 240v
- Frequency: 50 - 60 hz
- Current: 600ma
- Voltage: 70v
- Amps: 0.18Amps
- Dimensions: 11 x 11 x 7cm
- Warranty: 3 Years
- Energy Used in 1 Year (5145hrs): 82.9 kWh/(a * m2)
With the Osram led’s that we are using they are designed to be on for long periods of time
and have a lifespan of double a normal led at a staggering 100,000 hours with very minimal
drop in output over time of less than 1% per year with our cooling system.
Included in each light engine as standard is M4 MCPET which is the most
reflective material available on the market made from microcellular foamed sheets.
A microcellular foamed sheet is a foamed body that contains air bubbles of sizes of
several µm.The light reflects randomly on the bordering surface between the air and
PET, resulting in excellent light reflecting performance.
Not only does this mean more light out to your plants giving a
more efficient lamp but it also means less light back into your lamp meaning less heat and a longer lifespan.
The PCB (Printed Circuit Board) is the most integral part of the led lamp even more so
than the diodes themselves as this is the first point of contact for processing the heat
from the led effectively. We use a triple layer MCPCB (Metal Core Printed Circuit Board)
for maximum strength and heat dissipation with an aluminum base layer, on the reverse of
the MCPCB are thermal pads to effectively mate the board to the heatsink eliminating any
possible thermal spikes. All components are of course of the highest quality and built to last
Class 6 components which come with UL and ROHS Certification.
And of course we have our optics made in North Wales just one mile from our base this allows
us to have full control over the materials used to ensure that each and every batch is identical and
of course reduces our Carbon Footprint.Our lens has many advantages over the individual led
lens that you see in use in many lamps, these individual lens are generally designed for downlights
etc and are not designed to be used for up to 20 hours per day so the materials they use will degrade
over time by up to 60% of the transmission rate in tests we have performed.Solid sturdy and fire
retardant UL approved materials are used to make our optics and our expertise has created a lens
with multiple points of control ensuring that all the light output gets to your plants whilst
maintaining minimum refraction and maximum transmission over the years.
And of course we have our heat sinks made here in North Wales next door to our base
this allows us to have full control over the materials used to ensure that each and every
batch is identical.
- Earth Friendly Aluminum for light weight and maximum heat transference.
- Maximum surface area using pin fins allow free air flow in any direction while transferring more heat faster.
- Strong and Durable design with no sharp edges.
- Fits any standard 80mm fan perfectly.
And of course we have our cases made here in the UK, this allows us to have full control over the
materials used to ensure that each and every batch is identical and of course reduces our Carbon
Footprint.
Tough 1.2mm thick steel case:
Nut inserts and Hank bushes are used to ensure an exact fit.
Fibre laser cutting for accuracy of up to 0.25mm and sealing of cut edges to prevent oxidisation etc.
High end reflective powder coating finish:
- UV proof.
- Water proof.
- Grease proof.
- Heat Resistant.
- No oxidisation in marine environments.
High quality tried and tested drivers are used in all our Budmaster LED lamps, we have been
using the same drivers for three years now and run at a 0.5% failure rate. So long story short
we use good drivers that rarely fail.We use high quality constant current led drivers each of
which has its own 12v fan output allowing us to have a more modular and build and better
overall redundancy model in our lamps.
All drivers include industry standard and UL approved connectors from TE and JST.
Noise is the most common issue that growers have to contend with when purchasing
high powered led lamps, with this in mind we have designed our cooling system using
low noise fans high output UL approved fans:
- Waterproof IP68 rating.
- UL, ROHS CE approved.
- 26 Decibels.
- 2500 RPM.
- 33.56 CFM.
- JST Connector.
The lamp is covered by a warranty for defects for a period of 3years from the date of purchase. During this period, the appliance may be returned to the seller with proof of purchase (cash receipt). If a defect is detected, it will be repaired or replaced.
This warranty does NOT cover abusive use of the appliance, accidental damage (fading, wetting), repairs by unauthorized persons.
Found a better price?
Delivery conditions
CONDITIONS FOR DELIVERY
- Door-to-door orders on the territory of Bulgaria are sent with Econt Express on the next day of the order.
- Delivery to other countries is estimated within 3-6 business days.
- If the item you ordered is not available, we will contact you to inform you about the delivery time and to confirm your order.
- The delivery price is indicative and is recalculated according to the rates of the courier company.
- All goods are packed in a way that prevents any damage. If you notice the packaging is damaged, once your package has arrived, inform the transporter!
- Goods are always packed in discreet packaging.
NOTE: The delivery companies may experience delays on Black Friday and Official Holidays due to an increase in shipping volume. Thank you for your patience and understanding.
Order items at a regular price with a total value of over BGN 100 and pick up with FREE DELIVERY to an Econt office.