Water pumps

Specifications NHA7000 :

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 5W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 400 l/h
• Max Hight: 0.8 m

BOYU FP-1000 Adjustable Pump 3000L/hr

The BOYU Liquid pumps are submersible and suitable for all hydroponc systems and nutrient solution pumping requirements. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated. Disassembly and cleaning is easy thanks to the clever design.

• Max H - 3.5m
• Power - 68w
• Outlet - 19mm (3/4") 
• 3000LPH

Manufactured with high quality plastic materials inside a sealed structure, its engine manufactured completely watertight and cooled by oil, which has a filter inside to avoid obstructions in the operating mechanism, it consists of a thermostat that stops the engine in case of overheating.

You must always have it in the water for proper use and never deeper than 2mt. You should not work with it in temperatures above 35º

Depending on the flow or the dimensions of the hose that we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you are going to use an irrigation lance it is recommended at least 2000l / h for a bit of water flow, with 3000l / h you will get a normal pressure and with 4000l / h you will get the ideal pressure for the lance. 

If its use is going to be used for drip irrigation, a minimum of 1000l / h is recommended for each square meter of crop.

Specifications:

• Depth max: 2 mt
• 10mt power cable.
• Power: 10 W
• Maximum height: 1 mt
• Flow rate: 600 L / H
• Voltage / Frequency: 220-240v / 50hz

The circulation pump RP is one of the most commonly used among circulators.

RP models circulators are immersed completely and are suitable for many applications.These pumps are extremely reliable. They meet the international standards, and the compact size makes it easy to install, even in smaller spaces.

Circulators are hose connections sizes 13 mm and 20 mm and are associated with variable flow regulator. These circulators are easy to maintain and are equipped with 1.5 m cable. The RP 400 L / h have a capacity of 400 liters per hour.

BOYU FP-1000 Adjustable Pump 1000L/hr

The BOYU Liquid pumps are submersible and suitable for all hydroponc systems and nutrient solution pumping requirements. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated. Disassembly and cleaning is easy thanks to the clever design.

• Max H - 1.8m
• Power - 16w
• Outlet - 15mm (3/4") 
• 1000LPH

The circulation pump RP is one of the most commonly used among circulators.

RP models circulators are immersed completely and are suitable for many applications.These pumps are extremely reliable. They meet the international standards, and the compact size makes it easy to install, even in smaller spaces. 

Circulators are hose connections sizes 13 mm and 20 mm and are associated with variable flow regulator. These circulators are easy to maintain and are equipped with 1.5 m cable. The RP 800 L / h have a capacity of 800 liters per hour.

Garden Itools water drain pump 8000l / h

Ideal for pumping rainwater or swimming pool water. The power is 400W with a capacity of up to 8000 liters / hour. The pump reaches a height of 5 meters and a depth of 7 meters. It has a cable with a length of 10 meters.

Features:

Power: 400W

Power supply: 230V

Capacity: 8000 l / h

Maximum height: 5m

Maximum depth: 7m

The pump has a 10m power cable.

The circulation pump RP is one of the most commonly used among circulators.

RP models circulators are immersed completely and are suitable for many applications.These pumps are extremely reliable. They meet the international standards, and the compact size makes it easy to install, even in smaller spaces. 

Circulators are hose connections sizes 13 mm and 20 mm and are associated with variable flow regulator. These circulators are easy to maintain and are equipped with 1.5 m cable. The RP 1400 L / h have a capacity of 1400 liters per hour.

Water pump for installation in or outside the tank.

High quality ABS plastic housing. Ceramic anti-corrosion shaft, resistant to any solutions. It is suitable for high-pressure systems.

It is suitable for tanks around 80L and drip systems.

• Flow rate: 800L/h
• Height of water column: 1.0m
• Power: 8W
• Input voltage: 220-240V 50Hz
• Outlet diameter: 12mm
• designed for long-term use
• dual water-cooling design for quick heat dissipation
• applicable to all hydroponics needs - pumping, aeration, NFT, filtration
• suction cups for secure attachment in the tank

The circulation pump RP is one of the most commonly used among circulators.

RP models circulators are immersed completely and are suitable for many applications.These pumps are extremely reliable. They meet the international standards, and the compact size makes it easy to install, even in smaller spaces. 

Circulators are hose connections sizes 13 mm and 20 mm and are associated with variable flow regulator. These circulators are easy to maintain and are equipped with 1.5 m cable. The RP 2000 L / h have a capacity of 2000 liters per hour.

BOYU FP-1500 Adjustable Pump 1500L/hr

The BOYU Liquid pumps are submersible and suitable for all hydroponc systems and nutrient solution pumping requirements. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated. Disassembly and cleaning is easy thanks to the clever design.

• Max H - 2.5m
• Power - 25w
• Outlet - 12.7mm (1/2") 
• 1500LPH

BOYU FP-1500 Adjustable Pump 1500L/hr

The BOYU Liquid pumps are submersible and suitable for all hydroponc systems and nutrient solution pumping requirements. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated. Disassembly and cleaning is easy thanks to the clever design.

• Max H - 3m
• Power - 43w
• Outlet - 19mm (3/4") 
• 2000LPH

It uses high-strength wear-resistant shaft core, has highly efficient energy-saving, and long service life.

• Flow rate: 1200L / h
• Height of the water column: 2 m
• Power: 18W
• Input voltage: 220-240V 50Hz
• Output diameter: 12mm
• designed for long-term use
• double water-cooled construction for quick heat removal
• applicable to all hydroponics needs - pumping, aeration, NFT, filtration
• suction cups for secure fastening in the tank

AQUAKING Q5503 SUBMERSIBLE PUMP 11000L/H

The AquaKing Submersible Pump Q5503 is equipped with a side connection where you can directly connect a hose of 20/25 mm. The pump has a capacity of up to 11.000 liters per hour.

A submersible pump is made to pump away large amounts of water. You can use the pump in case of flooding or when emptying rain barrels, swimming pools, ponds or wells. As the name suggests, the pump is "immersed" in water when used. When purchasing a submersible pump, pay attention to maximum suction depth. This is the maximum depth at which the pump can do its job. Are you going to pump away dirty water or water with solid particles? Check that the pump is suitable for dirty water.

In short, the Aquaking submersible pump with side connection is a reliable, useful pump for pumping away (dirty) water.

Specifications

• 550 watt engine power 230 V/50 Hz;
• Hose 25/30 mm and 1" male thread;
• Capacity Max. 11,000 liters per hour;
• Max. 8.5 mlc (0.85 atm pressure);
• Max. 5 mm drainage;
• 10 meter rubber power cable H05 RNF. 3 x 0.75 mm.

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 8W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 600 l/h
• Max Hight: 1 m

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 16W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 800 l/h
• Max Hight: 1.30 m

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 22W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 1000 l/h
• Max Hight: 1.60 m

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 28W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 1400 l/h
• Max Hight: 2.00 m

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 48W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 1800 l/h
• Max Hight: 2.30 m

Wave Maker 3000 - stirrer pump 6W 3000 l / h

Wave Maker 3000 is a pump designed to stir the nutrient solution in the tank. Protects water in the tank from stagnation and therefore loss of oxygen. The more water is circulated, the more oxygen will be enriched. The device has a hinged spherical joint that allows 360 ° rotation.

• Power: 6W
• Capacity: 3000 l / h.
• Dual wave drive with a maximum power of 12,000 liters per hour
• Equipped with a high-quality suction syringe for easy attachment

Wave Maker 6000 - stirrer pump 12W 6000 l / h

Wave Maker 6000 is a pump designed to stir the nutrient solution in the tank. Protects water in the tank from stagnation and therefore loss of oxygen. The more water is circulated, the more oxygen will be enriched. The device has a hinged spherical joint that allows 360 ° rotation.

• Power: 12W
• Capacity: 6000 l / h.
• Dual wave drive with a maximum power of 12,000 liters per hour
• Equipped with a high-quality suction syringe for easy attachment

Manufactured with high quality plastic materials inside a sealed structure, its engine manufactured completely watertight and cooled by oil, which has a filter inside to avoid obstructions in the operating mechanism, it consists of a thermostat that stops the engine in case of overheating.

You must always have it in the water for proper use and never deeper than 2mt. You should not work with it in temperatures above 35º

Depending on the flow or the dimensions of the hose that we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you are going to use an irrigation lance it is recommended at least 2000l / h for a bit of water flow, with 3000l / h you will get a normal pressure and with 4000l / h you will get the ideal pressure for the lance. 

If its use is going to be used for drip irrigation, a minimum of 1000l / h is recommended for each square meter of crop.

Specifications:

• Depth max: 2 mt
• 10mt power cable.
• Power: 18 W
• Maximum height: 1.3 mt
• Flow rate: 800 L / H
• Voltage / Frequency: 220-240v / 50hz

Manufactured with high quality plastic materials inside a sealed structure, its engine manufactured completely watertight and cooled by oil, which has a filter inside to avoid obstructions in the operating mechanism, it consists of a thermostat that stops the engine in case of overheating.

You must always have it in the water for proper use and never deeper than 2mt. You should not work with it in temperatures above 35º

Depending on the flow or the dimensions of the hose that we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you are going to use an irrigation lance it is recommended at least 2000l / h for a bit of water flow, with 3000l / h you will get a normal pressure and with 4000l / h you will get the ideal pressure for the lance. 

If its use is going to be used for drip irrigation, a minimum of 1000l / h is recommended for each square meter of crop.

Specifications:

• Depth max: 2 mt
• 10mt power cable.
• Power: 22 W
• Maximum height: 1.6 mt
• Flow rate: 1000 L / H
• Voltage / Frequency: 220-240v / 50hz

Manufactured with high quality plastic materials inside a sealed structure, its engine manufactured completely watertight and cooled by oil, which has a filter inside to avoid obstructions in the operating mechanism, it consists of a thermostat that stops the engine in case of overheating.

You must always have it in the water for proper use and never deeper than 2mt. You should not work with it in temperatures above 35º

Depending on the flow or the dimensions of the hose that we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you are going to use an irrigation lance it is recommended at least 2000l / h for a bit of water flow, with 3000l / h you will get a normal pressure and with 4000l / h you will get the ideal pressure for the lance.

If its use is going to be used for drip irrigation, a minimum of 1000l / h is recommended for each square meter of crop.

Specifications:

• Depth max: 2 mt
• 10mt power cable.
• Power: 50 W
• Maximum height: 2.5 mt
• Flow rate: 2000 L / H
• Voltage / Frequency: 220-240v / 50hz