NEPTUNE HYDROPONICS

Specifications NHA7000 :

It is made of high-quality plastic materials in a closed structure, whose engine is completely waterproof and oil-cooled, which has a filter inside to avoid obstacles in the working mechanism.
It consists of a thermostat that stops the engine in case of overheating. You should always immerse it in the water for proper use and never more than 2 meters a. You should not work with it at temperatures above 35º.
Depending on the flow or the dimensions of the hose we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you want to use an irrigation pipe, at least 2000l / h is recommended for a small flow of water, at 3000l / h you will get normal pressure and at 4000l / h you will get ideal pressure. If you are going to use the pump for drip irrigation, a minimum of 1000 l/h is recommended for each square meter of crop.

Manufactured with high quality plastic materials inside a sealed structure, its engine manufactured completely watertight and cooled by oil, which has a filter inside to avoid obstructions in the operating mechanism, it consists of a thermostat that stops the engine in case of overheating.

You must always have it in the water for proper use and never deeper than 2mt. You should not work with it in temperatures above 35º

Depending on the flow or the dimensions of the hose that we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you are going to use an irrigation lance it is recommended at least 2000l / h for a bit of water flow, with 3000l / h you will get a normal pressure and with 4000l / h you will get the ideal pressure for the lance. 

If its use is going to be used for drip irrigation, a minimum of 1000l / h is recommended for each square meter of crop.

Specifications:

• Depth max: 2 mt
• 10mt power cable.
• Power: 18 W
• Maximum height: 1.3 mt
• Flow rate: 800 L / H
• Voltage / Frequency: 220-240v / 50hz

It is made of high-quality plastic materials in a closed structure, whose engine is completely waterproof and oil-cooled, which has a filter inside to avoid obstacles in the working mechanism.
It consists of a thermostat that stops the engine in case of overheating. You should always immerse it in the water for proper use and never more than 2 meters a. You should not work with it at temperatures above 35º.
Depending on the flow or the dimensions of the hose we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you want to use an irrigation pipe, at least 2000l / h is recommended for a small flow of water, at 3000l / h you will get normal pressure and at 4000l / h you will get ideal pressure. If you are going to use the pump for drip irrigation, a minimum of 1000 l/h is recommended for each square meter of crop.

It is made of high-quality plastic materials in a closed structure, whose engine is completely waterproof and oil-cooled, which has a filter inside to avoid obstacles in the working mechanism.
It consists of a thermostat that stops the engine in case of overheating. You should always immerse it in the water for proper use and never more than 2 meters a. You should not work with it at temperatures above 35º.
Depending on the flow or the dimensions of the hose we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you want to use an irrigation pipe, at least 2000l / h is recommended for a small flow of water, at 3000l / h you will get normal pressure and at 4000l / h you will get ideal pressure. If you are going to use the pump for drip irrigation, a minimum of 1000 l/h is recommended for each square meter of crop.