SPUDNIK is an ideal aircool reflector, providing lamp cooling by allowing the hot air around the lamp to be drawn out of the room before it has a chance to create high heat.

SPUDNIK has been the choice of professionals for years, with an extremely efficient reflector: 97% reflectivity!

• 97% reflectivity
• Miro9 - internal reflector
• Includes 4mm thick glass sheet
• Flange - 125mm (5") or 150mm (6")

SPUDNIK is an ideal aircool reflector, providing lamp cooling by allowing the hot air around the lamp to be drawn out of the room before it has a chance to create high heat.

SPUDNIK has been the choice of professionals for years, with an extremely efficient reflector: 97% reflectivity!

• 97% reflectivity
• Miro9 - internal reflector
• Includes 4mm thick glass sheet
• Flange - 125mm (5") or 150mm (6")

The electronic version of Master gear has high power factor, lower power loss, open output circuit and short circuit protection.

The output power varies +/- 3% when the input voltage varies between 20% and 18%. Lamp voltage varies within ANSI standards. Stable output power, can increase lamp life by 30% and reduce color temperature deviation. Easy installation!

• Lamp Type: High Pressure Sodium Lamps
• Rated power: 600W
• Length: 355 mm
• Width: 150 mm
• Height: 90 mm

The chokes (ballasts) regulate the voltage supplied to the selected lamp, to the operating voltage for it and ignite the lamp, creating a high-voltage pulse after the interruption of the current from the starter. They are divided into two types - electromagnetic and electronic ballast. The difference between the two is that the electronic ballast does not require a starter and is usually lighter and heats up less. Other benefits are quieter operation than a conventional ballast, an increase in lamp life by 30% - 50% and reduced light flux pulsations.

​Electronic ballasts change the flow of current in the light bulb using a series of induction coils that are separated from each other. Unlike the magnetic ballast, they use one induction coil, not a series of coils. The pulse sent from the ballast to the lamp is faster, which reduces energy consumption. Electronic chokes do not heat up during operation.

The reflector is suitable for 400W and 600W lamps.

• Attach a small fan and it will blow the hot air out of the lamp.
• In this way, the temperature of the lamp will be reduced by up to 30-40%.
• The lamp can be moved closer to the tops of the plants.
• Perfect for rooms where several lamps are connected.
• Diameter Ø 125 mm
• LENGTH 300 mm

The Mantis Pro Grow is a unique reflector that maintains its profile throughout its adjustable range.

The five easy- to-adjust settings allow you to start with a denser and more focused light when your plants are still small, expanding the light spread depending on their needs and size. The light flux can also be adjusted by changing the position of the socket. Recommended especially for plants reaching sizes above average.

Features:

• large reflective surface - 56 x 70cm
• independent adjustment of both wings
• ability to move the lamp horizontally and vertically
• lightweight and easy to assemble
• suitable for all lamps: 250-1000W HPS and MH, as well as all CFLs

Reflector Diamond 600W

• Suitable for 600W - 400W HID lamps
• Can increase yield up to 50%
• Unique diamond shape

Reflector Diamond 400W

Reflector Max Light

Aluminum reflector reflecting 95% of the light.

Adjust-A-Wings is a high-class reflector equipped with Super Spreader for even higher efficiency.

Manufactured from the highest quality materials, this reflector brings a number of benefits to both plants and gardeners.

• Twice the power and efficiency of most other reflectors on the world market;
• Increase the cultivation area, with each lamp, by up to 75%;
• Increases lamp performance up to 50%;
• Reduces heat, saves energy;
• Corrosion resistant;
• 97% Reflection;
• Super Alloy glass coating;
• Adjustable double, parabolic reflectors.
• Dimensions - 70cm x 55cm

Defender is a model created for the more professionally oriented growers.

It has all the qualities of the Enforcer model, but unlike it combines a combination of high-class technologies, aesthetics, strength, efficiency and easy installation. The main difference is that the Defender is made from extremely strong aluminum (H18), used in aircraft construction, which is extremely strong and extremely flexible.

This allows preserving the perfect parabolic curves, so important in light dispersion, otherwise vulnerable to changes when mounting and dismounting the reflector. In addition, the surface is covered with a titanium-white, heat-resistant polymer coating reducing the heat emitted by the lamp and having the property of spreading the light extremely evenly and having a reflectivity of 86% .

Hobby version of the popular Avenger!

The shape of this reflector gives the same even light distribution and reflection as the Avenger, but is made from a lower grade aluminum and does not include the Super-Spreader.
The Enforcer has the same benefits as the Avenger, including an impressively low-hanging position over your plants and balanced light distribution.

Reflectance is around 86% and guaranteed to maintain its reflectivity for a minimum of 3 years ... Sold in Europe, UK, USA and Canada

• Economical double parabolic reflector
• Control "hot spots" by attaching a "Super-Spreader"

Effect of Adjust A Wings ENFORCER (medium):

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

Hobby version of the popular Avenger!

The shape of this reflector gives the same even light distribution and reflection as the Avenger, but is made from a lower grade aluminum and does not include the Super-Spreader.
The Enforcer has the same benefits as the Avenger, including an impressively low-hanging position over your plants and balanced light distribution.

The reflection is around 86% and is guaranteed to maintain its reflection for a minimum of 3 years

• Economical double parabolic reflector
• Control "hot spots" by attaching a "Super-Spreader"

Effect of Adjust A Wings ENFORCER:

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

Pearl pro is a relief reflector developed by Adjust A wings that offers a more powerful light reflection (+ 5.1%) compared to a standard Stucco reflector.

With the same power consumption, it provides greater radiation over the area of interest. Pearl Pro will give you a higher yield! The same with more powerful light sources. Significantly better light distribution (+ 10%) compared to conventional mirror Stucco reflectors helps to reduce the number of hot spots and uniform light distribution.

Thanks to better light distribution and intensity, Pearl Pro gives you better coverage. Accordingly, crop uniformity will be better. Up to 60% more lumens compared to Stuсco!

• Use with ballast corresponding to lamp power - 1000W maximum
• New junction box design keeps moisture away from electrical connections
• Mounting metal plate supporting the weight of the lamp
• Secure connection method

Reflector made of finely polished aluminum, with E40 ceramic socket

This reflector can accommodate all lamps up to and including 1000w . Compatible with most chokes currently available.

• Dimensions: 50x50x16 cm
• Manufacturer: CIS

This reflector is characterized by its absolute stability.

This reflector has not only the advantages of its predecessors, but also acquired several new functionalities during its development.

The reflector can not only be adjusted in height, but can also be tilted and positioned according to your needs. Thanks to the middle reflector, maximum reflectivity is achieved. Therefore, the light is spread so evenly that the appearance of hot spots is almost zero and the use of an additional diffuser becomes unnecessary. Another novelty is the upper rail, which allows the reflector to be installed not only symmetrically, but also flexibly. No spreader needed - AZERWING does not have a spreader, this should provide better light dispersion compared to previous models.

Meanwhile, it turned out that the spreader can lead to concentrated shading and form a Doppler effect (that is, when more Adjust-A-Wings are mounted in parallel with spreaders, there is a danger of light overlap). In addition, it is not necessary to maintain a wide angle in places where several reflectors meet; on the other hand, it has a sharp angle that guarantees a homogeneous specific output without any hot spots.

Reflector wings have a finely forged structure – just like the Adjust-A-Wing. Prima Klima uses a new material for its reflectors – VEGA GREEN PVD coating, which reflects an optimized radiation background for plants.

• Adjustable socket
• No hotspot
• Guaranteed reflectivity up to 95%
• L/W/H 55 x 58-72 x 20 cm

This reflector has not only the advantages of its predecessors, but also acquired several new functionalities during its development.

The reflector can not only be adjusted in height, but also can be tilted and positioned according to your needs. Thanks to the middle reflector, maximum reflectivity is achieved. Therefore, the light is spread so evenly that the probability of hot spots is almost zero and the use of an additional diffuser becomes unnecessary. Another novelty is the upper rail, which allows the reflector to be installed not only symmetrically, but also flexibly. No Spreader Required - AZERWING does not have a spreader, this should provide better light dispersion than previous models. The reflector sheet is made of anodized aluminum with 86% light reflection after the modeling process.

Meanwhile , it turned out that the spreader can lead to concentrated shading and form a Doppler effect (that is, when more Adjust-A-Wings are mounted in parallel with spreaders, there is a danger of light overlap). Moreover, it is not necessary to maintain a wide angle in places where several reflectors meet; on the other hand, it has a sharp angle that guarantees a homogeneous specific output without any hot spots.

Features:

• Adjustable socket
• No hotspot
• Guaranteed reflectivity up to 86%
• L/W/H 55 x 71 x 20 cm

Adjust-A-Wings is a high-end reflector equipped with a Super Spreader for even higher efficiency.

Manufactured from the highest quality materials, this reflector brings a number of benefits to both plants and gardeners. Designed for maximum efficiency, the Avenger model is made with a coating of fused glass and titanium dioxide, using PVD (Physical vapor deposition). technology - the most advanced technique for laying reflective surface layers on a number of work surfaces. This coating is the most reflective, most durable and sustainable coating known to science.

• Twice the power and efficiency of most other reflectors on the world market;
• Increase the cultivation area, with each lamp, by up to 75%;
• Increases lamp performance up to 50%;
• Reduces heat, saves energy;
• Corrosion resistant;
• 97% Reflection;
• Super Alloy glass coating;
• Adjustable double, parabolic reflectors.
• Dimensions: 100cm x 70cm
• Suitable for: 1000W or 2x400W, 2x600W sodium (HPS) or metal halide (MH) lamps
• Illuminated area: Up to 3.89 m2.

Parabolic reflector for HPS & MH - Size: medium (diameter 89 cm)

• Aluminum on both sides
• Includes mounting hardware
• Reflector includes mounting bracket and lamp socket. The lamp can be installed vertically or horizontally
• The exclusive adjustable bracket allows the user to raise or lower the lamp inside the reflector

Feature:

• Innovative design: can be installed vertically or horizontally
• Easy to install
• Made of high quality aluminum
• It comes with a built-in UL-certified socket and a 4.5m power cord
• A lamp is not included in the set

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but it is made of a different grade of aluminum.

Includes Heat shield Spreader.
The Tomax has the same benefits as the original AdjustAWings, including an impressively low-hanging position over your plants and balanced light distribution. Economical double parabolic reflector. Control "hot spots" by attaching a "Heat shield Spreader"

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

*Lamp is not included in the set.

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but it is made of a different grade of aluminum.

Includes Heat shield Spreader.
The Tomax has the same benefits as the original, including an impressively low-hanging position over your plants and balanced light distribution. Economical double parabolic reflector. Control "hot spots" by attaching a "Heat shield Spreader".

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

Tomax with reflectors for double-ended lamps, offer powerful light.

Contents:

• 3-mode adjustable reflector
• ballast 1150W
• Full-spectrum LAMP

Adjust A Wing Socket 

With this kit you can modify a Cooltube of 125mm the Reflector Adjust A Wings, since without these pieces, it is difficult to fit the tube to the Wings.

You will benefit from the advantages of taking the heat out of the cooltube, reflecting more the crop zone with the Adjust A Wings.Very easy to assemble, since the pieces only fit in one place, and if you have doubts, we can always help you.

You will get the benefits of a Cooltube, which will cool the growing room better and get lower to 3ºc of temperature. And we get the many advantages of the Adjust A Wings which will better distribute the light spectrum of your light bulbs.

With this Kit you will significantly improve your results, visible from the first crop.

Cleaning cloth for lamps and reflectors

All light bulbs must be wiped of fingerprints after installation. This microfiber cloth is perfect for that. Removes fingerprints and dust from lamps, glass, light fixtures, etc. Size: 40x40cm.

Master controller are able to control the lights to simulate sun rise and sunset.

You can customize the operating time as you want. It provides the excellent care for your indoor growing environment

- 2 MODES:  master controller has "follow mode" and "inverse mode". Follow mode requires to put only one sensors close to rooms' climate control system so that both sensors are exposed to the same temperature. Inverse mode requires to use both sensors in different room, so 2 sensors will execute inverse action, you can choose to control the lights in which room.

-CLEAR INTERFACE: master controller contains multiple functions with simple button control. Clear digital screen can accuratly indicate your settings, status and controller menu.

-SAFETY CONTROL master controller is designed with 2 quality sensors for checking temperature in all time.You can set your desired temperature so that it will automatically dim the lights when the temperature reach a specific level and turn off the lights if it reaches another temperature. "Main" and "aux" jacks each can be connected up to 80 ballasts (160 as total).

GSE Timer Box IV for switching several inductive loads such as high pressure steam lamps with high inrush current to turn ON and OFF simultaneously.

Technical specifications:
Body: WxHxD= 200x255x95mm
Timer box: WxHxD= 230x300x110mm
1 pole 1x10A 2'300W
Voltage: 230V / 50Hz
Protection class: IP54

Features:

- 1 pc. 24-hour timer
- Green dimmable display
- Designed for inductive loads
- 0-10V or PWM output
- Temperature display
- Temperature monitoring during emergency stop
- Blackout
- Sunrise/Sunset - Day counter
- Time format - 0-24h or 12 AM/PM
- Temperature format °C or °F
- Starting heating when the light is off

Boxing relay switches two independent circuits - stopped them and release them.

It is operated by a third power cord that must be plugged into a timer switch or GSE timer box. Each of electricity networks can withstand 4x600W (total svetlinie 8x600W).

Sizes and technical data's:

• Case: WxHxD = 180x130x60mm
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP54

CONTROL ALL OF YOUR LIGHTS WITH ONE CONTROL UNIT WITH ADDED HEATING CONTROL (3PHASE)

The Advanced GSE Control Unit is a professional indoor growing timer & contactor system for turning on 4 x 600w lights.

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

• This system is  will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

The timer box GSE 8x600W supplies current 4x16A to relays for ballasts 8x600W + heating

The Timer Box III is built from high-quality components. The Timer box controls several inductive loads. One of them is high pressure lamps. The timer in the dashboard is German - Grasslin , and the contacts are Slovenian - ISKRA . The case is hermetically sealed and secured, which provides it with protection class IP54.

You can open or close the circuit with a circuit breaker. The contactor is based on the control system and is designed for up to 4x600W inductive load. The heating socket is only activated when the lamps are switched off.

Technical data:

• Size: 500x160x115mm
• Voltage: AC 230V/400V 50-60 Hz
• Power: 7200W fully loaded (32A)
• Heating: up to 2400w (resistive loads)
• Mechanical timer: 24h automatic/manual
• Setting interval: 15 minutes
• Mechanical durability of relays: 10,000,000 cycles
• Protection class: IP54

TIMER BOX II DELAYS THE LIGHTING AND HEATING

The GSE Control Unit (Timer Box II) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

TIMER BOX II DELAYS THE LIGHTING AND HEATING (3 PHASE)

The GSE Control Unit (Timer Box III) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

TIMER BOX II DELAYS THE LIGHTING AND HEATING

The GSE Control Unit (Timer Box II) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME

This relay box for indoor growing switches two indipendent power circuits on and off. It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W (total 8x600W lights).

SIZES AND TECHNICAL DATA:

• Case = 180x130x60mm
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP44

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME

This relay box for indoor growing switches two indipendent power circuits on and off. It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W 

SIZES AND TECHNICAL DATA:

• Case: WxHxD = 180X130X60MM
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP44

A CONTROL UNIT FOR INDOOR GROWING CAN MANAGE UP TO 6X600W LAMPS

The Advanced GSE Control Unit for grow box manage the indoor lighting of plants, is a professional timer & contactor system for turning on 6 x 600w lights.

FEATURES OF THIS CONTROL UNIT FOR GROW ROOM

• This system will turn on 6 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

A CONTROL UNIT FOR INDOOR GROWING CAN MANAGE UP TO 6X600W LAMPS

The Advanced GSE Control Unit for grow box manage the indoor lighting of plants, is a professional timer & contactor system for turning on 6 x 600w lights.

FEATURES OF THIS CONTROL UNIT FOR GROW ROOM:

• This system will turn on 6 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management)

The Advanced Control Unit is a professional timer & contactor system for turning on 4 x 600w lights.

• This system will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This is relevant as a light typically requires about 20% extra ampage to 'start up' as opposed to when they are up and running.

CONTROL ALL OF YOUR LIGHTS WITH ONE CONTROL UNIT WITH ADDED HEATING CONTROL

The Advanced GSE Control Unit is a professional indoor growing timer & contactor system for turning on 4 x 600w lights.

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

• This system is  will turn on 4 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management).

This relay box for indoor growing switches two indipendent power circuits on and off.

It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W (total 9x600W lights).

24 hour, 7 Day, 2 pin, Topica 600

Grasslin Topica plug in time switch which is suitable for use with a wide variety of domestic and office place environments

• LCD display
• 2 pin
• 1 minute minimum switching time
• Manual switch, run display and switching state display
• Fixed weekday block formation
• Random generator which retards the switching command from 1 - 45 minutes
• 3 year running reserve

The analog Grässlin timer is a high-quality and safe switch.

The switch is safe up to 16-amp as opposed to the cheap switches in the stores.

Specifications:

• Suitable for  220 to 240 Volts 50 Hz
• Switching capacity of 16A
• Power consumption 5 VA
• Suitable for temperatures between -10 degrees and +55 degrees
• Adjustable per quarter
• With manual on / off switch

Grässlin is a German manufacturer of electronic devices, including timers, thermostats and controls for lighting.

This timer is not suitable to switch HPS lamps. The timer is suitable as a switch for energy saving lamps, TL and LED lighting. To connect HPS lighting we recommend a switch with a relay

Digital timer Cornwall Electronics

Schedule the turning on or off of any electrical device at home during your absence, with the convenience of digital control and simplified configuration.

- 8 preset ON/OFF programs
- MANUAL OFF/AUTO/MANUAL ON position makes it easier to access programs
- Ability to choose between 12- and 24-hour mode
- The SUMMERTIME function is useful for zones with changing time zones
- Random function allows programs to be started with a delay of 0 to 32 minutes 16 programmable combinations for individual days or groups of days - - Voltage: 220-240V AC 50Hz
- Maximum load: 16A, 3600W
- Minimum time: 1 minute

Analog timer for automatic control of household appliances, heating systems, lighting.

Turns on and off the connected equipment (lamp, pump, water tank heater). Can be programmed at intervals.

Voltage regulator dimmer

Features:

- voltage:230V

- Speed controller with 2 A internal fuse.

- range: from 0 to 300W

New Gavita Pro E-series with improved models of existing classical series lighting modules Gavita, already compatible and adapted for complete lighting control via Gavita Master kontroler.

V kit included Gavita Pro 1000W 400V DE EL lamp. The most efficient and highest radiation pattern of the market (Class of efficiency: A ++) .Savmestim with Gavita Master controller. Lights more than 2 m.

Gavita Pro 600 is available as a complete set including professional HortiStar HR 96 reflector or as a separate ballast perfect fit with Gavita

Triple Star reflector. The ballast is completely closed and no cooling fan, as emits very little heat during operation, allowing safe and easy installation in close proximity to your light, which in turn reduces the amount of electromagnetic interference which reach the ballast and prolongs life considerably and its efficiency. The kit is easily installed by two screws.