Cleaning cloth for lamps and reflectors

All light bulbs must be wiped of fingerprints after installation. This microfiber cloth is perfect for that. Removes fingerprints and dust from lamps, glass, light fixtures, etc. Size: 40x40cm.

With this kit you can modify a Cooltube of 125mm the Reflector Adjust A Wings, since without these pieces, it is difficult to fit the tube to the Wings.

You will benefit from the advantages of taking the heat out of the cooltube, reflecting more the crop zone with the Adjust A Wings.Very easy to assemble, since the pieces only fit in one place, and if you have doubts, we can always help you.

You will get the benefits of a Cooltube, which will cool the growing room better and get lower to 3ºc of temperature. And we get the many advantages of the Adjust A Wings which will better distribute the light spectrum of your light bulbs.

With this Kit you will significantly improve your results, visible from the first crop.

Adjust A Wing Socket 

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but it is made of a different grade of aluminum.

Includes Heat shield Spreader.
The Tomax has the same benefits as the original AdjustAWings, including an impressively low-hanging position over your plants and balanced light distribution. Economical double parabolic reflector. Control "hot spots" by attaching a "Heat shield Spreader"

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

*Lamp is not included in the set.

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but it is made of a different grade of aluminum.

Includes Heat shield Spreader.
The Tomax has the same benefits as the original, including an impressively low-hanging position over your plants and balanced light distribution. Economical double parabolic reflector. Control "hot spots" by attaching a "Heat shield Spreader".

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

Parabolic reflector for HPS & MH - Size: medium (diameter 89 cm)

• Aluminum on both sides
• Includes mounting hardware
• Reflector includes mounting bracket and lamp socket. The lamp can be installed vertically or horizontally
• The exclusive adjustable bracket allows the user to raise or lower the lamp inside the reflector

Feature:

• Innovative design: can be installed vertically or horizontally
• Easy to install
• Made of high quality aluminum
• It comes with a built-in UL-certified socket and a 4.5m power cord
• A lamp is not included in the set

This reflector has not only the advantages of its predecessors, but also acquired several new functionalities during its development.

The reflector can not only be adjusted in height, but also can be tilted and positioned according to your needs. Thanks to the middle reflector, maximum reflectivity is achieved. Therefore, the light is spread so evenly that the probability of hot spots is almost zero and the use of an additional diffuser becomes unnecessary. Another novelty is the upper rail, which allows the reflector to be installed not only symmetrically, but also flexibly. No Spreader Required - AZERWING does not have a spreader, this should provide better light dispersion than previous models. The reflector sheet is made of anodized aluminum with 86% light reflection after the modeling process.

Meanwhile , it turned out that the spreader can lead to concentrated shading and form a Doppler effect (that is, when more Adjust-A-Wings are mounted in parallel with spreaders, there is a danger of light overlap). Moreover, it is not necessary to maintain a wide angle in places where several reflectors meet; on the other hand, it has a sharp angle that guarantees a homogeneous specific output without any hot spots.

Features:

• Adjustable socket
• No hotspot
• Guaranteed reflectivity up to 86%
• L/W/H 55 x 71 x 20 cm

This reflector has not only the advantages of its predecessors, but also acquired several new functionalities during its development.

The reflector can not only be adjusted in height, but can also be tilted and positioned according to your needs. Thanks to the middle reflector, maximum reflectivity is achieved. Therefore, the light is spread so evenly that the appearance of hot spots is almost zero and the use of an additional diffuser becomes unnecessary. Another novelty is the upper rail, which allows the reflector to be installed not only symmetrically, but also flexibly. No spreader needed - AZERWING does not have a spreader, this should provide better light dispersion compared to previous models.

Meanwhile, it turned out that the spreader can lead to concentrated shading and form a Doppler effect (that is, when more Adjust-A-Wings are mounted in parallel with spreaders, there is a danger of light overlap). In addition, it is not necessary to maintain a wide angle in places where several reflectors meet; on the other hand, it has a sharp angle that guarantees a homogeneous specific output without any hot spots.

Reflector wings have a finely forged structure – just like the Adjust-A-Wing. Prima Klima uses a new material for its reflectors – VEGA GREEN PVD coating, which reflects an optimized radiation background for plants.

• Adjustable socket
• No hotspot
• Guaranteed reflectivity up to 95%
• L/W/H 55 x 58-72 x 20 cm

This reflector is characterized by its absolute stability.

This reflector is characterized by its absolute stability.

Reflector made of finely polished aluminum, with E40 ceramic socket

This reflector can accommodate all lamps up to and including 1000w . Compatible with most chokes currently available.

• Dimensions: 50x50x16 cm
• Manufacturer: CIS

Pearl pro is a relief reflector developed by Adjust A wings that offers a more powerful light reflection (+ 5.1%) compared to a standard Stucco reflector.

With the same power consumption, it provides greater radiation over the area of interest. Pearl Pro will give you a higher yield! The same with more powerful light sources. Significantly better light distribution (+ 10%) compared to conventional mirror Stucco reflectors helps to reduce the number of hot spots and uniform light distribution.

Thanks to better light distribution and intensity, Pearl Pro gives you better coverage. Accordingly, crop uniformity will be better. Up to 60% more lumens compared to Stuсco!

• Use with ballast corresponding to lamp power - 1000W maximum
• New junction box design keeps moisture away from electrical connections
• Mounting metal plate supporting the weight of the lamp
• Secure connection method

Hobby version of the popular Avenger!

The shape of this reflector gives the same even light distribution and reflection as the Avenger, but is made from a lower grade aluminum and does not include the Super-Spreader.
The Enforcer has the same benefits as the Avenger, including an impressively low-hanging position over your plants and balanced light distribution.

The reflection is around 86% and is guaranteed to maintain its reflection for a minimum of 3 years

• Economical double parabolic reflector
• Control "hot spots" by attaching a "Super-Spreader"

Effect of Adjust A Wings ENFORCER:

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

Hobby version of the popular Avenger!

The shape of this reflector gives the same even light distribution and reflection as the Avenger, but is made from a lower grade aluminum and does not include the Super-Spreader.
The Enforcer has the same benefits as the Avenger, including an impressively low-hanging position over your plants and balanced light distribution.

Reflectance is around 86% and guaranteed to maintain its reflectivity for a minimum of 3 years ... Sold in Europe, UK, USA and Canada

• Economical double parabolic reflector
• Control "hot spots" by attaching a "Super-Spreader"

Effect of Adjust A Wings ENFORCER (medium):

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

Defender is a model created for the more professionally oriented growers.

It has all the qualities of the Enforcer model, but unlike it combines a combination of high-class technologies, aesthetics, strength, efficiency and easy installation. The main difference is that the Defender is made from extremely strong aluminum (H18), used in aircraft construction, which is extremely strong and extremely flexible.

This allows preserving the perfect parabolic curves, so important in light dispersion, otherwise vulnerable to changes when mounting and dismounting the reflector. In addition, the surface is covered with a titanium-white, heat-resistant polymer coating reducing the heat emitted by the lamp and having the property of spreading the light extremely evenly and having a reflectivity of 86% .

Adjust-A-Wings is a high-class reflector equipped with Super Spreader for even higher efficiency.

Manufactured from the highest quality materials, this reflector brings a number of benefits to both plants and gardeners.

• Twice the power and efficiency of most other reflectors on the world market;
• Increase the cultivation area, with each lamp, by up to 75%;
• Increases lamp performance up to 50%;
• Reduces heat, saves energy;
• Corrosion resistant;
• 97% Reflection;
• Super Alloy glass coating;
• Adjustable double, parabolic reflectors.
• Dimensions - 70cm x 55cm

Adjust-A-Wings is a high-end reflector equipped with a Super Spreader for even higher efficiency.

Manufactured from the highest quality materials, this reflector brings a number of benefits to both plants and gardeners. Designed for maximum efficiency, the Avenger model is made with a coating of fused glass and titanium dioxide, using PVD (Physical vapor deposition). technology - the most advanced technique for laying reflective surface layers on a number of work surfaces. This coating is the most reflective, most durable and sustainable coating known to science.

• Twice the power and efficiency of most other reflectors on the world market;
• Increase the cultivation area, with each lamp, by up to 75%;
• Increases lamp performance up to 50%;
• Reduces heat, saves energy;
• Corrosion resistant;
• 97% Reflection;
• Super Alloy glass coating;
• Adjustable double, parabolic reflectors.
• Dimensions: 100cm x 70cm
• Suitable for: 1000W or 2x400W, 2x600W sodium (HPS) or metal halide (MH) lamps
• Illuminated area: Up to 3.89 m2.

Aluminum reflector reflecting 95% of the light.

Reflector Max Light

Reflector Diamond 400W

Reflector Diamond 600W

• Suitable for 600W - 400W HID lamps
• Can increase yield up to 50%
• Unique diamond shape

The Mantis Pro Grow is a unique reflector that maintains its profile throughout its adjustable range.

The five easy- to-adjust settings allow you to start with a denser and more focused light when your plants are still small, expanding the light spread depending on their needs and size. The light flux can also be adjusted by changing the position of the socket. Recommended especially for plants reaching sizes above average.

Features:

• large reflective surface - 56 x 70cm
• independent adjustment of both wings
• ability to move the lamp horizontally and vertically
• lightweight and easy to assemble
• suitable for all lamps: 250-1000W HPS and MH, as well as all CFLs

The reflector is suitable for 400W and 600W lamps.

• Attach a small fan and it will blow the hot air out of the lamp.
• In this way, the temperature of the lamp will be reduced by up to 30-40%.
• The lamp can be moved closer to the tops of the plants.
• Perfect for rooms where several lamps are connected.
• Diameter Ø 125 mm
• LENGTH 300 mm

The electronic version of Master gear has high power factor, lower power loss, open output circuit and short circuit protection.

The output power varies +/- 3% when the input voltage varies between 20% and 18%. Lamp voltage varies within ANSI standards. Stable output power, can increase lamp life by 30% and reduce color temperature deviation. Easy installation!

• Lamp Type: High Pressure Sodium Lamps
• Rated power: 600W
• Length: 355 mm
• Width: 150 mm
• Height: 90 mm

The chokes (ballasts) regulate the voltage supplied to the selected lamp, to the operating voltage for it and ignite the lamp, creating a high-voltage pulse after the interruption of the current from the starter. They are divided into two types - electromagnetic and electronic ballast. The difference between the two is that the electronic ballast does not require a starter and is usually lighter and heats up less. Other benefits are quieter operation than a conventional ballast, an increase in lamp life by 30% - 50% and reduced light flux pulsations.

​Electronic ballasts change the flow of current in the light bulb using a series of induction coils that are separated from each other. Unlike the magnetic ballast, they use one induction coil, not a series of coils. The pulse sent from the ballast to the lamp is faster, which reduces energy consumption. Electronic chokes do not heat up during operation.

SPUDNIK is an ideal aircool reflector, providing lamp cooling by allowing the hot air around the lamp to be drawn out of the room before it has a chance to create high heat.

SPUDNIK has been the choice of professionals for years, with an extremely efficient reflector: 97% reflectivity!

• 97% reflectivity
• Miro9 - internal reflector
• Includes 4mm thick glass sheet
• Flange - 125mm (5") or 150mm (6")

SPUDNIK is an ideal aircool reflector, providing lamp cooling by allowing the hot air around the lamp to be drawn out of the room before it has a chance to create high heat.

SPUDNIK has been the choice of professionals for years, with an extremely efficient reflector: 97% reflectivity!

• 97% reflectivity
• Miro9 - internal reflector
• Includes 4mm thick glass sheet
• Flange - 125mm (5") or 150mm (6")

Completely sealed with double glass and an airtight seal, this reflector has a stable construction and a stopper that prevents it from falling down sharply.

It has 6 integrated fittings in the case and air-cooling design. The body is made of galvanized steel and highly reflective, textured aluminum. Includes socket and 4.5m cable.

• Hole size: Ф150
• Manufacturer: Sun System
• dimensions: 64 x 39.70 x 27.60 cm

These fantastic reflectors are truly exceptional in controlling the temperature of the grow room and as a result; providing high yields.

Featuring tempered 4mm flat glass to keep heat away from your plants, it can vent heat through the two vents that can be connected to an air duct only or a small fan. The reflector features highly reflective interior wings to maximize your light output, and your plant will be able to grow up to inches below the reflector .

This is a highly efficient way of lighting any large room and several Aerowings can be joined together creating highly efficient lighting. Each kit comes with hanging hooks, an adjustable socket, 5 meters of cable with IEC connection, as well as a glass panel and frame.

• It can be connected to a 150mm air duct.
• Dimensions: 20 x 60 x 54cm

Raptor 8" is designed for those who want more. Closed-type cooling reflector. Heat-resistant glass protects and limits heat. It is equipped with two Ф200 ventilation holes. The socket has four positions for moving horizontally. Capacity: one bulb .

• Reflector dimensions: 105cm x 77cm x 27cm.
• Carton dimensions: 110cm x 84cm x 34cm.
• Dimensions of the flanges: Ф200.
• Cable length: 4m
• Reflectivity: 95%
• Recommended ventilation: 1100m3/h
• Warranty: 5 years

The Raptor 8" was developed for those who want more.

Closed-type coolable reflector. Heat-resistant glass protects and limits heat. It is equipped with two F200 ventilation holes. The socket has four positions for moving horizontally. The Raptor 8" Dual is equipped with two sockets. Two identical bulbs (HPS or MH) or two different ones (HPS and MH) can be included. Capacity: two bulbs.

• Reflector dimensions: 105cm x 77cm x 27cm.
• Carton dimensions: 110cm x 84cm x 34cm.
• Dimensions of the flanges: Ф200.
• Cable length: 4m
• Reflectivity: 95%
• Ability to move the lamp horizontally
• suitable for two lamps: 600-1000W HPS and MH
• Warranty: 5 years

Monster Warriors Ф150 Air-cooled reflector for 400 W, 600 W and 1000 W sodium (HPS) and metal halide (MH) lamps.

Reflects up to 99% of light.

• Reflector size: 60 x 62 x 30cm
• The size of the holes is F150

Monster Warriors Ф200 Air-cooled reflector for 400 W, 600 W and 1000 W sodium (HPS) and metal halide (MH) lamps

Reflects up to 99% of light.

• Reflector size: 60 x 62 x 30cm
• The size of the holes is Ф200mm

With a maximum load of up to 1000 watts MH or HPS bulb, the Dominator XXL reflector is a valuable component in indoor growing.

Large size, allows for closer placement of plants. Includes tempered glass, removable frame, built-in socket and long lamp cord. Fully sealed - with sealed glass and a hinged frame to hold the glass securely in place. Galvanized steel body with powder coating. The high-quality, textured aluminum interior offers excellent reflectivity and diffusion. The cable to hold the brakes, stops the sudden swing. Thumbscrews and locking mechanism are easy to use and provide an excellent seal.

• "Thumb" captive screws and locking mechanism for ease of use and excellent sealing
• European mirror design with circular reflector offers high reflection up to 95%
• Features F200 flanges and air cooling with ball rings to keep piping in place
• The swivel cover retention cable prevents the glass from suddenly swinging
• Horizontal mounting only

Wide spread of light allows plants to be closely spaced for maximum light delivery in low light areas. Fitted with safety cables for safe and easy maintenance, constructed from galvanized steel.

The fully sealed glass ensures a tight fit to the reflector body. Made from precision 95% reflective, European aluminum . Comes with built-in socket, pre-wired, complete with hanging hooks.

• High quality aluminum
• The safety cable holds the glass door in place
• Fully sealed with hinged glass
• Built-in socket
• Dimensions: H/W/D 25cm x 68cm x 90cm
• Accepts: HPS / MH bulbs from 400W to 1000W

With a maximum load of up to 1000 watts of MH or HPS bulb, the Master Yield reflector is a valuable component in indoor growing.

Pre-connected with a 4.5m power cable and built-in plinth, the body is made of galvanized steel. With 95% reflective aluminum interior for excellent and even light reflection. Designed to illuminate large areas and should be mounted between 60cm - 2m high.

The Master II Receiver features screws and a locking mechanism to facilitate ease of use and excellent sealing.

• "Thumb" captive screws and locking mechanism for ease of use and excellent sealing
• European mirror design with circular reflector offers high reflection up to 95%
• Features F150 flanges and air cooling with ball rings to keep piping in place
• The swivel cover retention cable prevents the glass from suddenly swinging
• Horizontal mounting only
• dimensions: 63.5 x 60.7 x 24.38 cm

With a maximum load of up to 1000 watts of MH or HPS bulb, the SunGro reflector is a valuable component in indoor growing.

Mid-range reflector with cooling. The steel housing and heat-resistant glass allow the heat to be removed without it remaining in the room. It is equipped with steel ropes that prevent the glass from swinging and falling while changing the bulb or cleaning.

• "Thumb" captive screws and locking mechanism for ease of use and excellent sealing
• European mirror design with circular reflector offers high reflection up to 95%
• Features F200 flanges and air cooling with ball rings to keep piping in place
• The swivel cover retention cable prevents the glass from suddenly swinging
• Horizontal mounting only

Gloria reflector with cooling Ф150mm

This reflector gives your garden the light it needs, without unnecessary heat.

Features:

• Wide spread of light allows plants to be spaced close together for maximum light in low light areas
• Made of heavy-duty, pre-galvanized steel
• The fully sealed glass ensures a snug fit
• Made from precision 95% reflective European aluminum
• Comes with built-in socket, 5m power cable and hanging hooks
• Reflector size: 50CM x 70CM x 20CM

Using the "spreader", which reduces the heat emitted by the lamp, the reflector can be lowered 20cm above the tops of the plants. It can also be installed under the lamp to be able to get as close as possible to the tops of the plants, without the risk of burning. The light is diffused and reflected to the reflector for more even illumination. Suitable for lamps from 400W to 600W.

Using the "spreader", which reduces the heat emitted by the lamp, the reflector can be lowered 20cm above the tops of the plants. It can also be installed under the lamp to be able to get as close as possible to the tops of the plants, without the risk of burning. The light is diffused and reflected to the reflector for more even illumination. Suitable for 1000W lamps.

Reflector complete with two CFL 2x55W lamps.

Suitable for germination as well as the vegetation phase.

Moves the lighting back and forth along a 220cm long rail.

In this way, it can be placed closer to the plants , as it does not stay in one place for long. Increases lamp efficiency and life.

Features:

• Travel speed - 3-3.30 minutes in one direction
• Movement pause from 2 to 120 seconds.
• Adjust the movement speed
• Possibility to limit the lifting by means of clamps.
• Holds up to 10 kg
• Drive motor power: 12W

The light track is a professional indoor lighting system.

Improves harvest and lowers energy consumption. Lightrail 3 has an automatic controller for efficient light distribution. Additional lighting can easily be added to it "Add a lamp". In this way, it saves space and time.

Instructions:

Attach the lights to the track and set the delay time at each end of the track. In this way, you will be able to illuminate about 50% larger area without any increase in your electricity costs because the IntelliDrive motor consumes only 5 watts of power. With IntelliDrive you can move several lamps at once.

This system will allow you to duplicate the cultivation area with a single focus.

SunRail is a system of lightweight, adjustable and self-propelled rails that carry a lighting system (or several) along a 1.90 meter long aluminum rail and can cover an effective illuminated area of 1.20 x 3.50 meters. SunRail can supports up to 3 devices simultaneously thanks to the high resistance of the aluminum and the high-performance motor that drives the system.

This system is ideal for use with an Adjust a wings reflector to increase light projection.