Lumatek NXE 600W

A LOOK AT THE BENEFITS

• Higher light output
• Longer lamp life
• 5 year warranty
• Durable aluminum housing
• Silent
• Low power consumption
• The device is assembled easily and quickly
• Quick start: Immediately after switching on, the lamp reaches its optimal color.
• Electronic ballast resistance
• Compared to standard ballast resistance, the light is flicker-free

INSTRUCTIONS

The ballasts regulate the voltage supplied to the selected lamp, to the working one for it and ignite the lamp by creating a high-voltage pulse after the current from the starter is interrupted. They are divided into two types - electromagnetic and electronic ballast. The difference between the two is that the electronic ballast does not require a starter and is usually lighter and less heated. Other advantages are quieter operation than a conventional ballast, increasing the service life of the lamp by 30% - 50% and reduced pulsations of the luminous flux.

Electronic ballasts change the flow of current in a light bulb using a series of induction coils that are separated from each other. Unlike magnetic ballasts, they use a single induction coil, rather than a series of coils. The pulse delivered by the ballast to the lamp is faster, which reduces energy consumption. Electronic ballasts do not heat up during operation.

Important: do not turn the ballast on to SL (super lumen) mode when using a metal halide (MH) bulb.

Specifications :

• Mains plug with 4 metre power cable
• Voltage: 240V 50/60Hz
• Maximum input current (A): 2.70A
• Input power: 630W
• Output power: 600W
• Power factor: >0.99
• Voltage range: 175 to 275V
• THD: <8%
• CCF lamp: <1.7
• Operating frequency: high frequency
• Ambient temperature for full load operation: -25 to 40°C (-13 to 104°F)
• Case temperature rise (Δt): 35°C (95°F)
• Environment requires: > IP23
• Humidity: capable of operating at relative humidity from 0% to 90%, non-condensing

The ballast is guaranteed against defects for a period of 5 years. During this period, the device can be returned to the seller with proof of purchase (receipt). If a defect is found, it will be repaired or replaced.

This warranty does NOT cover misuse of the device, accidental damage (dropping, getting wet), or repairs by unauthorized persons.