Keep your probe clean!

Water Master Electrode Storage Solution (300 ml) is a storage solution for probes and Ph testers.

After the measurement is completed, the device should be rinsed with distilled water and stored. This can be done in the electrode cover or in a bottle, in either case keep the electrode moist with a storage solution which can be KCl 3.5M based or in buffer 4.

NPK Industries PM Wash is a ready to use foliar spray for your plants, which leaves them clean, fresh and vibrant as they should be when grown in their natural hot and humid environment.

These are the kind of conditions that plants will thrive on as PM Wash acts like cleansing rain, replicating that of a rain forest, or similar conditions, which make your fruits and flowers glisten with health and ripeness.

Mighty kills all stages of mites, including eggs!

Mighty can be used indoors, outdoors or in greenhouses. It acts instantly and kills at the moment. For best results, spraying a lot on the whole plant, at the first sign of pests.

The purest spider mite solution. "Mighty Wash" is a new revolutionary way to solve the problems associated with mites:

• Mighty Wash is a ready-to-use spray with a patented formula.
• It can be used throughout the cycle of growth and flowering.
• Mighty Wash is a new revolutionary way to solve the problem of spider mites in all stages of development from eggs to adults.
• Mighty Wash is an effective solution for mosquito problems.

Cleaning Solution for pH Electrodes (HCL), 300 ml

Vaccumax vacuum bag

• Dimensions: 26x28cm.
• Volume: 3L

Set of sediment filter and charcoal filter.

Suitable for systems:

• Eco Grow 240 L / h
• Power Grow 20L / h
• Mega Grow 40 L / h
• MAXQUARIUM 000 PPM 20L / hr

Enzymes are fundamental to the successful growth of plants.

They are high-quality proteins containing amino acids with a genetically encoded function. This genetic code plays a crucial role in the activity and function of enzymes. An enzyme is a catalyst that speeds up chemical reactions without being used up by itself. Without the presence of enzymes, some chemical changes would take hundreds of millions of years, while with the presence of enzymes, they occur within twenty milliseconds. Enzymes are also responsible for releasing energy from absorbed substances. Thus, nutrients are turned into bricks - waste products can be processed, reserves can be accumulated.

House & Garden Multi Zyme is a useful growth stimulator; it is rich in enzymes, coenzymes and vitamins. Multi Zyme accelerates and facilitates growth. It breaks down and destroys dead roots when watering, increasing the resistance of the plant. Enzymes convert nutrients into “easily digestible pieces” that are easily absorbed by the plant. Optimal effect: Each enzyme has an optimal value. When it is reached, the enzyme activity is highest.

Powdered Sulphur for Hotbox Sulfume Vaporiser

The Powdered Sulphur for the Hotbox Sulfume Sulphur Vaporiser is one of the best ways of preventing pests and moulds getting a hold in your grow-room. The hotbox slowly releases sulphur vapour which inhibits the spread of powdery mildew, botrytis and pests such as spider mites.

• Excellent preventative measure against moulds and many garden pests
• For use with the Hotbox Sulfume Sulphur Vaporiser
• Best used in the dark period when garden extraction is switched off
• Non-toxic to humans and does not affect growth of plants
• Also available as part of Hotbox Sulfume Sulphur Vaporiser Kit

Powdered Sulphur for use with the Hotbox Sulfume Sulphur Vaporiser

Contains:
1 x 500g pack of Powdered Sulphur or 1 x 2kg pack of Powdered Sulphur

Humidity Control That Adapts & Responds To Its Environment

Eliminate the Guessing Game! INTEGRA BOOST Humidiccant uses patented technology that releases or absorbs moisture, maintaining relative humidity at 55% in a contained environment. 

KEEP FRESH!

Maintain optimum humidity level to prevent:

• Dry and crispy plants
• Harsh and unpleasant smoke 
• Mold from forming 

PRESERVE AROMA

• Does not alter the smell of your product 
• Preserves the medical qualities 
• Maintains flavors

WHY USE BOOST? 

• We offer a Salt-Free Solution.
• Our Boost Packs will not alter your plant’s flavor or aromas.
• Includes replacement indicator for hands free monitoring.

Our Product is Tear Resistant & Spill Proof. It stays pliable reducing risk of tear and spills.We include Replacement Indicator Cards also known as Humidity Indicator Cards. It's a hands-free way of monitoring, so there’s no guessing as to when the product is used up.
Package is made with Food Grade Inks. 

Humidity Control That Adapts & Responds To Its Environment

Eliminate the Guessing Game! INTEGRA BOOST Humidiccant uses patented technology that releases or absorbs moisture, maintaining relative humidity at 55% in a contained environment. 

KEEP FRESH!

Maintain optimum humidity level to prevent:

• Dry and crispy plants
• Harsh and unpleasant smoke 
• Mold from forming 

PRESERVE AROMA

• Does not alter the smell of your product 
• Preserves the medical qualities 
• Maintains flavors

WHY USE BOOST? 

• We offer a Salt-Free Solution.
• Our Boost Packs will not alter your plant’s flavor or aromas.
• Includes replacement indicator for hands free monitoring.

Our Product is Tear Resistant & Spill Proof. It stays pliable reducing risk of tear and spills.We include Replacement Indicator Cards also known as Humidity Indicator Cards. It's a hands-free way of monitoring, so there’s no guessing as to when the product is used up.
Package is made with Food Grade Inks. 

Humidity Control That Adapts & Responds To Its Environment

Eliminate the Guessing Game! INTEGRA BOOST Humidiccant uses patented technology that releases or absorbs moisture, maintaining relative humidity at 62% in a contained environment. 

KEEP FRESH!

Maintain optimum humidity level to prevent:

• Dry and crispy plants
• Harsh and unpleasant smoke 
• Mold from forming 

PRESERVE AROMA

• Does not alter the smell of your product 
• Preserves the medical qualities 
• Maintains flavors

WHY USE BOOST? 

• We offer a Salt-Free Solution.
• Our Boost Packs will not alter your plant’s flavor or aromas.
• Includes replacement indicator for hands free monitoring.

Our Product is Tear Resistant & Spill Proof. It stays pliable reducing risk of tear and spills.We include Replacement Indicator Cards also known as Humidity Indicator Cards. It's a hands-free way of monitoring, so there’s no guessing as to when the product is used up.
Package is made with Food Grade Inks. 

For many plants, flowering is the most important period of their life cycle.

This stimulator will trigger the flowering process at an earlier stage, which will start the appearance of buds earlier and ultimately extend the flowering period and make it more intense. The flowering stimulator can be absorbed directly by the plant, thus contributing to an exceptional production of flowers, which are larger, heavier and more compact, but retain the characteristic aroma and taste of the variety.

Humidity Control That Adapts & Responds To Its Environment

Eliminate the Guessing Game! INTEGRA BOOST Humidiccant uses patented technology that releases or absorbs moisture, maintaining relative humidity at 62% in a contained environment. 

KEEP FRESH!

Maintain optimum humidity level to prevent:

• Dry and crispy plants
• Harsh and unpleasant smoke 
• Mold from forming 

PRESERVE AROMA

• Does not alter the smell of your product 
• Preserves the medical qualities 
• Maintains flavors

WHY USE BOOST? 

• We offer a Salt-Free Solution.
• Our Boost Packs will not alter your plant’s flavor or aromas.
• Includes replacement indicator for hands free monitoring.

Our Product is Tear Resistant & Spill Proof. It stays pliable reducing risk of tear and spills.We include Replacement Indicator Cards also known as Humidity Indicator Cards. It's a hands-free way of monitoring, so there’s no guessing as to when the product is used up.
Package is made with Food Grade Inks. 

Vaccumax vacuum bag

• Dimensions: 26x34cm.
• Volume: 4L

BAG Vacumax vacuum bag

• Dimensions: 22x21cm.
• Volume: 1.3L

The Root it Thermostat is a digital thermostat that controls the switching on of your heating pad using temperature data collected from the unit's probe.

In this way, you will be able to constantly maintain the desired environment for your seedlings and cuttings! Heating pads are usually used by placing them under the propagator to ensure that the temperature does not drop below optimal levels during one of the most difficult stages of young plant development. This unit works in combination with a heating pad, turning it on when the temperature drops below the set value, and when the temperature reaches the desired value, the Root!t Thermostat turns off the pad.

The device has its own power cable and socket for a heating pad. Power to the insole contact is delivered based on information gathered from the external temperature sensor, meaning that heat to the propagator is only delivered when needed.

• Maintains constant temperatures in an optimal range.
• Accelerates the stages of development in young plants and seedlings.
• Adjustable temperature range 20°C - 42°C.
• It has an external temperature probe.
• Very easy to work with.

Organic treatment and control of  Bud Rot, Mildew and Rust in pot plants & Hydroponics

A professional biological product from Liechtenstein from root with the active ingredient Fosphite (elictor). The active substance suppresses soil fungi by its unique mechanism of action. Several studies have also shown that ARTS From root is very effective in preventing and combating soil fungi Pythium and Phytophthora. DOCTOR from root is not phytotoxisch (toxic to the plant).

Sensi Coco Grow A+B is a two-component fertilizer for the growth phase in coconut substrate.

Coco substrates tend to bind to calcium and magnesium too easily. If these secondary macronutrients are "glued" to coir, they will naturally not be available where they are most needed - in the growth and development of your plants . Over time, this will lead to shortages, make plants more vulnerable to pests and diseases, and drastically reduce potential yields. Fortunately, the Sensi Coco series contains optimized levels of calcium and magnesium to ensure trouble-free growing in this substrate.

Sensi Coco Bloom A+B is a two-component fertilizer for the flowering phase in coconut substrate.

Coco substrates tend to bind to calcium and magnesium too easily. If these secondary macronutrients are "glued" to coir, they will naturally not be available where they are most needed - in the growth and development of your plants . Over time, this will lead to shortages, make plants more vulnerable to pests and diseases, and drastically reduce potential yields. Fortunately, the Sensi Coco series contains optimized levels of calcium and magnesium to ensure trouble-free growing in this substrate.

Plants always face new challenges in their life cycle.

Each phase of life has its own needs that must be met so that the plant can grow optimally. This also leads to changes in food intake. The most important is the base: the roots of the plant. The plant is completely dependent on the root system for its food supply. So a well-branched and healthy root system guarantees good nutrition. By applying HY-PRO Root Stimulator, this root system can be stimulated to create a solid foundation for the plant.

Fan with stand Ralight 45T-S 45 cm

The rack fan is the most used fan. Simply move the fan to the desired location. Since the fan is equipped with an adjustable foot, you can adjust the fan to the desired height.

• ​Equipped with a sturdy, adjustable leg
• The speed is adjustable in 3 positions
• Modern design
• Professional quality

Reefer Size jware pre-rolled paper, tubes.

J-ware - ready-rolled tapered paper tubes are produced from ultra-thin paper. The adhesive gum strip is only 0.5mm wide, making J-ware conical tubes, practically tasteless and burn almost free of residues - make the smoke test today! 

Product details:

• Length: 98mm
• PU 40x3pc

This screwdriver can do a lot more than simply screwing screws.

The Screwdriver Stash features a particular large stash that is as big as the handle. This is a great secret stash for money, herbs and pretty much everything that you want to keep hidden.

*16.50cm long

CKV - 3 mm

Replaceable active carbon for your anti-odor filter. Do not let those undesirable odors escape from your closet or growing area.

If your filter does not make these odors disappear as before. The time has come to change the active carbon inside it. Too easy.

Your filter will continue to work like new

CKV - 3 mm

Replaceable active carbon for your anti-odor filter. Do not let those undesirable odors escape from your closet or growing area.

If your filter does not make these odors disappear as before. The time has come to change the active carbon inside it. Too easy.

Your filter will continue to work like new

Humidifier connection kit

Kit with adapter suitable for connecting the 6mm tube to a humidifier, ready to screw on.

pH measuring equipment should be regularly cleaned and calibrated so that the user can be sure that the readings are accurate. The pH testers are calibrated using pH7.0 (buffer) and pH4.0 (bias) solutions before each measurement. Calibration solutions should be stored in cool places away from direct sunlight and heat.

When to calibrate your pH pen or probe:

• Before first use
• If the calibration reminder has disappeared from the LCD screen (30 days after the first calibration)
• If the pH reading is different than expected
• After cleansing and hydration
• After changing the batteries

To calibrate your pH pen or probe, follow the steps below:

1. Make sure your pen or probe is clean and hydrated.
2. Turn on the pH pen or probe. Press the power/hold button.
3. First calibrate to pH 7. Place the probe tip in fresh Bluelab pH 7.0 calibration solution. Wait for the reading to stabilize between pH 6.6 - pH 7.5. Long press the Cal button on the pen or meter until "CAL" is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once "0000" stops flashing, the sequence is complete and "pH7" is displayed.
4. Rinse. Rinse the tip of the pen or probe thoroughly in clean tap water and shake off any excess.
5. Calibrate to pH 4. Place the probe tip in fresh Bluelab pH 4.0 calibration solution. Wait for the reading to stabilize between 3.6 pH - 4.5 pH . Long press the Cal button until “CAL” is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once “0000” stops flashing, the sequence is complete and “pH4” is displayed.
6. Confirm the calibration. A calibration confirmation will appear at the bottom of the pen or probe screen to indicate a successful calibration. It will disappear after 30 days to indicate that a new calibration is required.

pH measuring equipment should be regularly cleaned and calibrated so that the user can be sure that the readings are accurate. The pH testers are calibrated using pH7.0 (buffer) and pH4.0 (bias) solutions before each measurement. Calibration solutions should be stored in cool places away from direct sunlight and heat.

When to calibrate your pH pen or probe:

• Before first use
• If the calibration reminder has disappeared from the LCD screen (30 days after the first calibration)
• If the pH reading is different than expected
• After cleansing and hydration
• After changing the batteries

To calibrate your pH pen or probe, follow the steps below:

1. Make sure your pen or probe is clean and hydrated.
2. Turn on the pH pen or probe. Press the power/hold button.
3. First calibrate to pH 7. Place the probe tip in fresh Bluelab pH 7.0 calibration solution. Wait for the reading to stabilize between pH 6.6 - pH 7.5. Long press the Cal button on the pen or meter until "CAL" is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once "0000" stops flashing, the sequence is complete and "pH7" is displayed.
4. Rinse. Rinse the tip of the pen or probe thoroughly in clean tap water and shake off any excess.
5. Calibrate to pH 4. Place the probe tip in fresh Bluelab pH 4.0 calibration solution. Wait for the reading to stabilize between 3.6 pH - 4.5 pH . Long press the Cal button until “CAL” is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once “0000” stops flashing, the sequence is complete and “pH4” is displayed.
6. Confirm the calibration. A calibration confirmation will appear at the bottom of the pen or probe screen to indicate a successful calibration. It will disappear after 30 days to indicate that a new calibration is required.

Thermometer for solutions and water 

This water thermometer allows to measure the temperature of the water in the tank of the nutrient solution. It has a silicone suction cup to fix it well. It is very important that the temperature is adequate since if the water is too cold, the plants grow more slowly and we would have to use a water heater.

The color emitted by these lamps is very distributed throughout the spectrum.

It contains some colors of the spectrum that are not found in mercury lamps, so halogenides are more suitable for the growth of plants, emitting a blue / white light. Within the halide lamps used in indoor gardening, the most used are the SUNMASTER due to the development, branching, dry weight, production, etc. that is achieved with them. 600W bulb.

• Wattage: 600W
• Mains Voltage (V): 400V
• Rated Hours: 6000
• CCT (K): 4500 K
• Luminous Flux (lm): 50 000
• Bulb Screw: E40

BioNova Veganics Bloom by BioNova is the perfect fertilizer in order for your plants to efficiently create and sustain flowers, our favorite part of the plant.

As soon as you start seeing those preflowers, you can begin using it; this product will give your plants everything they need to successfully grow amazing buds. As the weeks go by you’ll see your buds start to take shape and look denser. By using BioNova Veganics Bloom, you’ll be giving your plants exactly what they need, as its super easy for them to absorb and it’s also totally organic. Thanks to its complete formula, the amount and quality of resin in your plants will notably increase.

BioNova Veganics Grow by BioNova is a base product for your plants vegetative period. This product is designed for ecological grows, as it’s made out of natural ingredients extracted from vegetal material.

Once your saplings or clones begin showing more root then you’ll need to start using BioNova Veganics; it’s extremely easy for your plants to absorb, so you can use it pretty early. It contains a form of root stimulant, so you’ll need to use it in each transplant or when entering the flowering phase so that the roots can get that extra little boost they need. When used during the growth period your plants will be extra strong and grow many more branches. BioNova guarantees an almost perfect grow; your plants will want for nothing and flowering will begin much earlier.

This product also has an EU organic ingredient certificate.

The "FerroOutdoor" set is designed for outdoor cultivation, ideal for the flowering phase.

This package guarantees you an abundant yield in the presence of highly concentrated nutrients. The combination of Bloom basic fertilizer, PK flowering stimulator, enzymes and the nourishing Bio Crop, offers a powerful program for the flowering phase of plants.

Contains:

• Bloom A+B 10L - a universal nutrient and contains the unique application scheme for plants with explosive flowering.
• PK Enriched 10L - Contains phosphates and potassium, essential elements for powerful color formation.
• Enzyme Plus 5L - A natural combination of enzymes in liquid form with the presence of 15 different enzymes.
• Bio Crop 10L - increases the content of chlorophyll in the plant, as well as the production of sugars, by 40%.

The pH level of soils, substrates and nutrient solutions greatly affects crop performance.

• Measure more times with faster sensor response and direct measurements in substrates
• Suitable for many types of growing environments
• Durable probe tip for direct insertion into the root zone
• Simple calibration process, with two points and 30-day calibration indicator
• Backlit LCD display, low battery indicator, auto shut-off function
• 2 x AAA alkaline batteries included

Faran Humidistat HR-EHSA humidity controller

No neccessary of additional unit for installation. Easy to use with its simple constructure. Manufactured to use for only one humidifier since the capacity of internal switch is only 2.2 ampere. High durability and trouble free.

SPECIFICATIONS:

- Measurement : 10%~80%(rH%)

- Accuracy : +/- 5%

- Operation span : 3%

- Openration method : ON/OFF

- Capacity of microswitch : 2.2A

- Temperature : 10~40(Centigrade degree)

- Sensor type : Nylon Loop

- Dimension : 140H X 95L X 45W(mm)

- Power supply : 110V(220V) / 60Hz(50HZ)

- Power cord : 2m

The Quest 70 is energy-efficient commercial dehumidifier 

 Removing 70 pints of water per day, this unit can save you thousands in energy costs every year compared to the competition. It gives you the flexibility to hang the unit overhead or use ductwork and keep the dehumidifier in a different space entirely.Like all Quest products, the 70 is made in the USA using the very best components and materials available.

Short specs:

• WATER REMOVAL: 70 PINTS/DAY AT 80F,  60% RH 
• EFFICIENCY OF 5.0 PINTS/KWH 
• POWER: 8.0 AMPS, 110-120V 
• ONBOARD DEHUMIDISTAT AND LOW VOLTAGE TERMINAL BLOCK

Detailed specs                           Instruction Manual

The Quest Dual 155 is one of the most energy-efficient commercial dehumidifiers on the market today.

Removing 155 pints of water per day, this unit can save you thousands in energy costs every year compared to the competition. It gives you the flexibility to hang the unit overhead or use ductwork and keep the dehumidifier in a different space entirely.

Like all Quest products, the Dual 155 is made in the USA using the very best components and materials available.

Short specs:

• WATER REMOVAL: 155 PINTS/DAY AT 80F,  60% RH 
• EFFICIENCY OF 7.3 PINTS/KWH 
• POWER: 8.0 AMPS, 110-120V 
• TERMINAL BLOCK WITH 24V WIRING FOR EXTERNAL CONTROL OPTIONS

Detailed specs                           Instruction Manual

This device uses the oscillation of high frequency ultrasound to transform the electrical oscillation into mechanical oscillation, using a ceramic disc of 12 membranes, and you can add up to 3 discs more of 12 membranes to get more power.

So Ocean Mist turns water into steam, eliminates static electricity and freshens the air.It is suitable for humidifying large crops or greenhouses.Keep in mind that in dry areas or excess heat greenhouses, there is a low relative humidity. Also you must know that growing plants should be between 60 and 75% relative humidity, at flowering under 60% and cuttings over 80% relative humidity.

Parameters:

• Moisture amount: 5 kg / h
• Air Volume: 150 m3 / h
• Spray outlet diameter: φ110mm
• Water particles: 10 microns
• Power: 300W
• The size of the orifice of the tube, in / out: 1/2
• Dimensions: 620x735x430mm.

Monster Fogger is a highly effective professional humidifier

VDL MEGAMIST 8L - room humidifier

The appliance has an 8 liter reservoir and an analog selector for adjusting the required humidity. The integrated safety system stops the humidifier in case the tank's water leaks out if there is overheating of the equipment for unknown reasons. Its moisturizing capacity is 380ml / h, so it can moisturize for 15 hours continuously.

It is accompanied by a cleaning and maintenance kit.

Humicon is a wall socket unit which is able to control an extractor according to the level of humidity.

This unit comes with an option of connecting a humidifier or dehumidifier. This unit is completely digital and constantly displays the current humidity of the environment.

• Maximum charge: 16 A - 3680 W (resistive) 16 A - 460 W (Inductive)
• Control range: 30 - 90 %
• Operating temperatures: 0 - 40 ºC
• Precision: ± 5% 

Dehumidifier Drybox VDL 50lt / Day

Dehumidifier for domestic and semi-industrial use.

The Best Humidification System CEZIO 

Choose the CEZIO for small to midsize applications or for use in areas where quiet operation is a must. Its very dry fog is ideal for greenhouse environments, mushroom growing, germination rooms, cigar shops, research chambers and storage areas.Quiet enough for residential use, CEZIO is your best bet for small environmental applications.Impressive clouds of smoky fog will add cool humidity to your midsize room.CEZIO's 2 GPH fogging capability will quickly cool and humidify and its low energy consumption saves envergy costs.

• No wiring necessary - plugs directly into a standard electrical outlet (220V/50Hz or 115V/60Hz).
• Unit should be connected directly to a water supply or can be gravity fed. An internal float valve will automatically fill a water reservoir.
• Unit connects to standard 6mm or1/4" OD tubing.

- Ideal for greenhouses up to 500sq.ft.,

- Humidifies up to 800 sq,ft. for mushroom growing,

- Abundant cool humidify for storage areas and research chambers up to 1000 sq.ft.

- For maximum fogging and circulation, operate unit without the lower housing as well as upper shousing and fogging head.

- Fog will propel 4~5 feet above the unit.

- Coverage : 100~150m2 (1,176~1,614ft2)

- Power Supply : 110V or 220V / 50Hz or 60Hz

- Particle Size : 5~20 microns

- Power Consumption : 90W

- Humidfication Capacity : 3,000cc ~ 5,000cc/hour

- Feed-Water Pressure : Less than 5kg/cm2

- Dimensions : 389 X 389 X 455mm (460 X 460 X 550mm:package)

- Net Weight : 7.7kgs(9.5kgs : shipping weight)

* Safety Approval : ISO, CE

HR-707 centrofugal  humidifier 

FEATURES

- Easy to install (Connect to water tap or water tank)

- Various spoace usage (on-wall), Easy to carry by handle

- Trouble-free simple structure (High durability), Good for chemical disinfection&deodorization

- Good for electronics, textile, tobacco facories, low-temperature warehouse and mushroom cultivation.

APPLICATIONS

Greenhouse, propagation room, research chamber, storage room, nursery, mushroom and orchid cultivation, chicken-breeding textile, tobacco and timber industries.

SPECIFICATIONS

- Coverage : 100-150m2(1,176-1,614ft2)

- Power Supply : 110V or 220V/ 50Hz or 60Hz

- Power Consumption : 90W

- Humidification Capacity : 4,000cc(1,05gallon/hour)

- Feed-Water Pressure : Less than 5kg/cm2

- Dimensions : 400 X 400 X 380mm(15,75" X 15.75" X 14.96"

The HR-50 is a fully automated unit that takes water from a separate source (via a float switch system) and distributes it into the air when needed, based on readings taken by its sensor equipment.

Features:

• Easy to install (Connect to faucet or water tank)
• Various placement options (wall mounting), Easy-to-carry handle
• Hassle-free simple structure (high durability), suitable for chemical disinfection and deodorization
• Suitable for electronics, textiles, tobacco factories, low temperature warehouses and mushroom cultivation.

The HR-15 is a fully automated unit that takes water from a separate source (via a float switch system) and distributes it into the air when needed, based on readings taken by its sensor equipment.

Features:

• Easy to use (connects to a tap or a water tank)
• Various placement options (wall mounting)
• Hassle-free simple structure (high durability)
• Suitable for chemical disinfection & odor removal
• Suitable for wood products, electronics, textiles, cigarette factories, low-temperature warehouses and mushroom cultivation

Stop Grow from Pro-Xl is a new and innovative product, designed to stop the growth of plants while stimulating their flowering, avoiding height issues in indoor cannabis grow rooms.

This growth regulator stops the vertical growth of cannabis plants, making indoor culture much easier. Add 30ml per 5 litre of water, mix it well and spray the plants with a fine mist. Do not touch the roots with it.

We can repeat the process 3-5 days later to achieve best results.

Stop Grow features:

• Stops vertical growth of plants and stimulates their flowering
• Cats changing the metabolism from growth to bloom, stimulating and saving up to a week of ripening
• Made from growth regulators from fish and plant extracts
• Dosage: 30ml/5l. Spray on plants avoiding contact with the roots. Repeat after 3-5 days.

solution EC 2.77 μS / cm for calibration of electronic EC-testers

calibration - according to the scheme on the packaging

Each meter is in need of maintenance, service and technical inspection, even if it is not broken. This process is called Calibration. Properly calibrated increases productivity, ensures consistency, comparability and compatibility with testers.

Power Roots is a powerful organic plant root system stimulator.

It is good to use both during the vegetative period and in the first weeks after the beginning of flowering. As a result of its use, plants develop strong and branched root systems, which leads to better absorption of nutrients from the soil and from there to better results. Power Roots is fast acting, economical and very well absorbed. Its use is a guarantee of healthy and strong plants.

Start Up is a compound fertilizer for plants during the growth phase.

It provides each young plant with the best combination of nutrients for the first crucial weeks. It contains a carefully balanced combination of root stimulator, vital products, natural hormones and growth nutrients all in one product.

Plagron Start-Up is the perfect solution for young rooted clones and young plants and gives them the best possible start!