Search

Pocket Size Waterproof Tester for EC / TDS / Temp.

Includes features such as replaceable probe , temperature measurement in °C or °F, automatic temperature compensation with adjustable ß, battery level indicator, stability indicator, auto-shutoff and auto- calibration all in a floating, waterproof housing.

Measurements are displayed at two levels on the LCD display: EU (20.00 Ms / cm) or TDS (10.00 PPT). It also displays the temperature from 0.0 to 60.0 °C (or 32.0 to 140.0 °F) on the secondary level at the same time.

INSTRUCTIONS FOR WORKING WITH THE TESTER:

• Remove the cap and turn on the tester by pressing the ON/OFF button. All usable segments of the LCD screen will be visible for about a second or as long as you hold the button.
• Immerse the probe in the solution you want to measure, select either EC or TDS mode with the SET/HOLD button.
• Gently mix the solution with the probe in a circular motion and wait for the reading to stabilize. I.e. until the hourglass symbol on the LCD screen turns off.
• The EC or TDS value is automatically temperature compensated and will be displayed on the main LCD, while T will be displayed on the secondary LCD.
• To lock the display while in measurement mode, press and hold the SET/HOLD button. The message “HOLD” will be displayed on the secondary display and locked on the LCD screen. Press any button to return to normal mode.
• To turn the tester off, press the ON/OFF button. The message “OFF” will appear on the secondary display. Release the button.
• Before each measurement, make sure that the tester is calibrated (you can know this if the inscription “CAL” lights up on the display)
• After each use of the tester, always turn it off, rinse its probe with water and store it with the cap closed.

SETTINGS:

• This mode allows you to change the winterization units for temperature C/F, conversion factor (CONV) and temperature coefficient (BETA). To enter this mode, press and hold the ON/OFF button until “CAL” on the secondary display replaced by "TEMP" then:
• To select C/F unit, press the SET/HOLD button, then press the ON/OFF button once to enter buffer settings or twice to return to normal mode.
• To change the TDS value after you have set the temperature section, press ON/OFF once to display the current value (eg 0.50 CONV). Select the desired value by pressing the SET/HOLD button, then press ON/OFF twice to return to normal mode.
• To change the temperature coefficient. After setting the TDS factor, press ON/OFF to display the current temperature coefficient value (eg 2.1 BETA). Press the SET/HOLD button to set the desired value, then press ON/OFF to to return to normal mode.

CALIBRATION:

• For maximum measurement accuracy, frequent calibration is recommended.
• From normal EC mode, press and hold the ON/OFF/CAL button until the “OFF” message on the display is replaced by the “CAL” message. Release the button.
• Immerse the probe in a suitable calibration solution: 12.88 mS/cm.
• After the value is read automatically, the LCD screen will display “OK” for about a second and the tester will return to normal, measuring mode.

There is no need to recalibrate the tester if you decide to change the measurement setting from EU to TDS.

When the calibration procedure is completed correctly, the inscription “CAL” lights up on the screen.

To reset to default settings and clear previous calibration, press the ON/OFF/CAL button after entering the calibration mode and before the calibration point is accepted. The secondary display will read “CLR” for about a second, the tester returns to its factory defaults settings and the inscription “CAL” turns off on the display automatically,

Gravity feed and main pressure irrigation controller

The PLANT!T® Water Timer can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir. Simply select the time you want the water supply to be turned on and off, link up to your irrigation dripper line and the timer will do the rest.

Key Features:

• 2 easy steps to programme – turn RUN TIME dial to desired irrigation time and turn FREQUENCY dial to desired time you want between irrigations.

Benefits:

• Ideal for gravity feed allotment systems to control feed from a water butt/reservoir
• Weather resistant
• Operated with two 1.5v AAA alkaline batteries (not included) that can last a full season without needing to be changed
• Auto safety valve shut-off when battery power is low and programme delay button for when you need to do plant maintenance work and don’t want to be irrigating
• Comes with all required fittings and inline filter

Accurate, easy to use and reliable. 24/7 EC monitoring

The Milwaukee MC310 PRO Conductivity (EC) Monitor allows you to automatically measure EC levels and alerts you with an alarm when you are out of set point range.

The MC310 EC automatically monitors your EC levels. Simply set your EC parameters and let the Milwaukee EC Monitor do the rest.
It is often used in nutrient tanks, hydroponics and gardening.
The Milwaukee PRO EC monitor offers:
ACCURACY
The Milwaukee PRO EC monitor offers accuracy up to ±2% of full scale.
AUTOMATION
The monitor has a set point range of 1.0 to 5.0 mS/cm with alarms that activate when readings are above or below the set point.

Professional pH-monitor for long-term use

The devices of the MS series are designed for constant monitoring of pH, EC or TDS values, directly in the tank. Each unit has a mode selection that is set by the user. The LED indicator activates and starts flashing when the pH, EC or TDS level changes above or below (user selected) the set value.

The pH-monitor for constant monitoring of hydroponic or fertilizer solutions , aquariums and aquaponic systems, pools, etc. has a convenient function for visual indication when the pH of the solution passes a set (by the grower) value (up or down, as selected by a knob).

• Manual calibration at 2 fixed points - pH 4 and pH 7.
• Separately connectable sensor compatible with pH monitors of other manufacturers.
• LED alarm
• Supplied with 12 VDC adapter, mounting kit and 20ml pH 7.01 calibration solution
• Dual, cruciform pH electrode with two meter cable (BNC connector)

Manufacturer's warranty - 2 years for the device, 6 months for the sensor. Does not apply to mechanical damage and improper operation!

Delta 9 Cannabiogen mark a before and after in your crop. It is the most potent metabolic biostimulator, perfect to combine with basic fertilizers.

Its use increases the crop by 30% and flowers produced in a larger amount of resin. А minimum of three applications is needed, it is preferable to perform four: two for spraying on the ground and two irrigation

FloraCoco is a high quality nutrient, efficient, and specially designed to give you the best results in coconut substrate.

This powerful formula, unique and exhaustive, includes enough calcium and magnesium to guarantee your plant an excellent development, with no need for calcium, magnesium and phosphorus additives, as requested by the majority of coconut fibre nutrients existing on the market today.

• Easy to use, this is a 2-part formula, Grow and Bloom
• Designed for vigourous growth and abundant flowering
• Includes enough calcium and magnesium and requests no additives whatsoever
• Guarantees dependable and stable results

 FloraCoco Bloom is an aggressive formula tuned for increased yields during the flowering phase. This unique formula includes high levels of phosphorus and all the necessary elements for abundant flowering.
 

Air-Pot containers get the best out of all plants because they develop a remarkable root system. And vigorous roots support healthy and prolific plants.

Like many clever tools, it is actually very simple – the Air-Pot ‘air-prunes’ roots and this constant pruning prevents any root circling and promotes the growth of more and more feeder roots. It is these fine, fibrous roots which use all the available water and food very efficiently, to help develop great top growth and excellent fruit.

But good roots can only develop in healthy soil/compost - soil that is alive.  Air-Pot containers also allow more air and better drainage than in any other container, another vital element that makes Air-Pot grown plants much healthier and happier. Roots are the foundation for all good growing.

High-quality turbine fan with plastic body of the well-known company CAN.

It is equipped with a built-in thermal protection switch, which turns off the motor when it reaches a high temperature. The Swiss-made motor along with the propeller design allows this type of fan to deliver strong airflow while producing less noise.

''Greengo' Slim Cigarette Paper Rolls, Unbleached

These unbleached tobacco paper rolls from 'Greengo' are from sustainable Forestry cultivation and at 14 g / mý thick, these cigarette paper rolls are the ideal balance between strength and thinness plus the full smoking flavour is, unaffected by these unbleached cigarette papers. The packaging is made from 200g strong recycled cardboard.

Product Details:

• Size: 44x4000mm
• Paper: Unbleached 14 g / mý
• Packaging: Counter Display Box with 24x Rolls

Glass Bong ‘Mushroom Tree‘ by 'Black Leaf'. Made of borosilicate glass with 5mm wall thickness, this bong is heavy and sturdy.

The kickhole is at the front so this pipe is suitable both for right handers and sinistrals. A further advantage is that the blown out smoke always leaves the bong at the front side and is not blown against the clothing or the seatmate.

'Mushroom Tree' Bong, black: A great contrast between the sprightly coloured mushrooms and the high gloss silver print on the dark background.

Options:

• black print
• transparent print

The new 'Plenty' Vaporiser comes from the makers of the famous 'Volcano' Vaporisers 'Storz & Bickel' a renowned Germany manufacturer.

This vaporiser comes with all the great features that are common to the VOLCANO Vaporizer, as well as some unique features specific to the Plenty Vaporizer. The heat-exchanger has a double helix to maximise the heating of the air which in turn guarantees a high-degree of vaporisation. The highly efficient stainless steel cooling coil ensures a pleasant aromatic experience.

Its 7 main features, are:

• Flexible Air Cooled Stainless Steel Vapour Hose
• Double Helix Heat Exchanger
• Retro Style Analog Temperature Gauge
• Temperature Adjustment Wheel
• Quality Craftsmanship
• Maximum Efficiency Purity & Hygiene
• Superior Aromatherapy Device

It has a small orange heating lamp to indicate its warming-up and soon ready for use. The filling chamber and the mouthpiece can easily be unscrewed from the device, for easy cleaning and maintenance. It is advised that, should you not have enough herbs, the filling chamber is best additionally filled with supplied liquid pad to occupy any empty space. Included are 3 replacement screens, two pieces of tubing, a plastic grinder and a brush to clean.

This "Party Size" grinder is made of Hardwood and is top quality. 

• 'Plain Polished' version. 
• With Steel Pin Teeth. 

Ziggi' Papers Slim ultra thin white

'Ziggi' Ultra Thin Slim Cigarette Papers & Filter-Tips, white with stripes Cigarette Papers & Filter-Tips from 'Ziggi' are produced under the patented URS (Ultimate Rolling Solution) Í System. The packets can also be used as a mixing tray. Every pack contains 32 papers (sheets).

Juicy Jay's makes many flavours for different tastes.

In order to fully appreciate these flavoured papers, you should try one yourself. Simply lick one paper and you'll instantly understand why Juicy Jay's flavoured papers are so popular. It's like adding candy to your tobacco. Juicy Jay's© products are made with their famous triple-dip system.

King Size Slim Raspberry Flavour PU 24 x 32 papers Juicy Jay's makes many flavours for different tastes.

In order to fully appreciate these flavoured papers, you should try one yourself. Simply lick one paper and you'll instantly understand why Juicy Jay's flavoured papers are so popular. It's like adding candy to your tobacco. Juicy Jay's© products are made with their famous triple-dip system. King Size Slim Raspberry Flavour PU 24 x 32 papers

Frosted glass bong cup.

• Diameter 35mm. (top hole)
• Diameter 15mm (throat opening)
• Height 75mm
• Print: Black leaf

Rosewood Pipe - Very fine, filigran shisham pipe.

Equipped indoor plant growing kit.

The growing area that this set provides is nearly 9 square meters. m. Convenient, compact and easy to assemble. Contains selected elements shaping independent ventilation and lighting systems .

*Sets can also be made according to your individual choice with different products and with different combinations. If you wish, you can contact us at the phone number on the website and we will help you create the perfect set for you!

Equipped indoor plant growing kit.

The cultivation area, which this set provides is from nearly 9 sq. m. Convenient, compact and easy to assemble. Contains selected elements forming independent ventilation and lighting systems .

*Sets can also be made according to your individual choice with different products and with different combinations. If you wish, you can contact us at the phone number on the website and we will help you create the perfect set for you!

Equipped indoor plant growing kit.

The growing area that this set provides is nearly 6 square meters. m. Convenient, compact and easy to assemble! Contains selected elements forming independent ventilation and lighting systems.

*Sets can also be made according to your individual choice with different products and with different combinations. If you wish, you can contact us at the phone number on the website and we will help you create the perfect set for you!

Equipped indoor plant growing kit.

The cultivation area which this   a set provides from nearly 6 sq. m. m. Convenient, compact and easy to assemble. Contains selected elements forming independent ventilation and lighting systems.

*Sets can also be made according to your individual choice with different products and with different combinations. If you wish, you can contact us at the phone number on the website and we will help you create the perfect set for you!

Equipped indoor plant growing kit.

The cultivation area that this set provides is about 2.25 sq. m. Convenient, compact and easy to assemble! Contains selected elements forming independent ventilation and lighting systems.

*Sets can also be made according to your individual choice with different products and with different combinations. If you wish, you can contact us at the phone number on the website and we will help you create the perfect set for you!

Equipped indoor plant growing kit.

The growing area that this set provides is nearly 1.5 square meters. m. Convenient, compact and easy to assemble! Contains selected elements forming independent ventilation and lighting systems.

*Sets can also be made according to your individual choice with different products and with different combinations. If you wish, you can contact us at the phone number on the website and we will help you create the perfect set for you!

Hand pipe made of precious shisham wood.

Engraved! 9cm in length

Lighter masked stash.

The lighter does ignite like a real lighter would but it does not contain gas so it does not produce flame. The stash is located at the bottom. Different colors.

The Cornwall dehumidifier will absorb the moisture to avoid any risk of mold on your plants, walls etc.

It is suitable for enclosed spaces of 15 to 20 m2 and can accumulate up to 12 liters per day through its 1.5 liter tank.

Its digital control panel has several functions.

• Turning the device on and off, with a light indicator
• Full regeneration tank indicator. The device will only stop when it is full.
• 24 hour timer. Working hours can be selected in 1-hour increments.
• Selection of desired humidity level, 00%- -5%-40%-45%-50%-60%-65%-70%-75%-80%.
• The device will stop automatically when the programmed speed is reached.
• Airflow selection, 2 speeds available 445m3/h max.
• Important: This moisture trap must be placed 30 cm from any wall on a flat and stable surface. It should never be covered. It will not be used if the temperature is below 0°c or above 45°c.

The Cornwall moisture trap has 4 wheels, a handle and a 2 meter power cord.

Administration of Delta ocho in the growth phase, activates the natural process of metabolism of the plant without being stressed.

It increases the activity of enzymes and proteins that are very specific and crucial for crop development.

This product provides a lot of macro and micronutrients, carbohydrates, amino acids and organic vitamins, which enhance the growth of plants. This formula is specially designed to make the most of your plants in the growth phase.

• Its use increases the crop by 30%, and the colors in proizvedezhdat times larger quantity of resin.
• It takes a minimum of three applications, it is preferable to perform four: two sprays and two watering

Propagation tray suitable for initial growing of seeds and cuttings

- number of baskets: 60 pcs

- black color

- length: 52 cm

- width: 32 cm

- diameter of the baskets: Ø 4cm

The cloning process, as well as the rooting process, are two delicate stages of the plant's life cycle. Therefore, it is an important task for growers to choose the right products and technology to guarantee an excellent result.

Bio Bloombastic is a highly concentrated enhancer for the last 4-6 weeks of flowering.

It contains minerals in combination with biological phytoeffectors that lead to increased flowering and strengthen the protective abilities of plants. When used correctly it produces beautiful, large and fragrant flowers and fruits with an organic taste. It is compatible with all fertilizer programs, but the amount of basic bloom fertilizer ("Bloom") should be reduced, as Bio Bloombastic contains high amounts of potassium and phosphorus.

• Explosion of sugars and color production.
• Enzyme content that helps processes on various fronts.
• Mass production of colors.
• Huge increase in final weight.
• Protection against stress.
• Strengthening the immune system
• Stimulating firmer cell structures.

Bactohemp fertilizer for growing hemp

RAPID DEVELOPMENT, GROWTH AND EXPLOSIVES BLOOM with a single application. Becomes insoluble soluble fertilizers. Protects against fungi. Avoid stress in transplants and deficiency states. With a single container can be up to 80 plants.

BACTOFIL is a water-soluble powder compound made with bacillus and bacteria that live in symbiosis with plants roots.

Benefits

• Explosive roots production.
• Stimulates plants growing.
• Protects against root fungi.
• Nitrogen from the atmosphere becomes attached to the substrate/ soil in a natural way, which stimulates the plants growth.
• Solubilises non soluble phosphorus and potassium, improving flowering.
• Generates cytokinin, auxins, and gibberellins continuously.
• Optimises aero and hydroponic cultivations, keeping them healthy.
• Ideal for guerrilla and exterior growing, maximum extraction from nutrients in substrate or ground.
• One application remains effective during entire plants lifespan.

Usage

Dilute bottle content in 25 L of water, or a teaspoon in 1 L of water.

Bactomatik content is a water soluble powder containing different microbial strains:

Paenibacillus azotoformans, Bacillus azotofixans, B. coagulans, B. megaterium, lactobacillus acidophilus, B. pumilus and Saccharomyces cerevisiae.

Bactomatik is the result of research and selection of families of bacteria with greater ability to stimulate root growth and plant in record time, to achieve automatic plants larger and vitality.

By using Bactomatik in combination with organic fertilizers we will stimulate the proliferation of these beneficial bacteria.

Bactomatik content is a water soluble powder containing different microbial strains:

Paenibacillus azotoformans, Bacillus azotofixans, B. coagulans, B. megaterium, lactobacillus acidophilus, B. pumilus and Saccharomyces cerevisiae.

Bactomatik is the result of research and selection of families of bacteria with greater ability to stimulate root growth and plant in record time, to achieve automatic plants larger and vitality.

By using Bactomatik in combination with organic fertilizers we will stimulate the proliferation of these beneficial bacteria.

GUANOFORTE is an organic fertilizer made from seabird excrement - the oldest and most valuable natural fertilizer.

Rich in organic phosphorus! Recommended for the flowering period.

It contains large amounts of macronutrients (NPK) and organic substances that have a high contribution to plant development.

Applied to the soil , it promotes the microbial microsystem and the very structure of the soil. Due to its slow release, its application is carried out once a week, in a very low dose.

Basically recognized for their fungicidal properties and completely effective organic origin.

The effectiveness of these properties come from a saponin toxic to fungi called equisetonin and silísico acid, existing in the plant Equisetum arvense L. or commonly called horsetail.

Much of its components make the ponytail in one of the most effective fungicides used in organic farming, to even, according to some studies, are also recognized, some insecticide-acaricide action against spider mites and aphids.

HOW TO USE:

Foliar: Prepare a solution with a proportion of 125 g of COLA DE CABALLO® per 0.5 liters of water and let it marinate for 24 hours; It must be removed vigorously for 15 minutes at the beginning and end of that period. The resulting solution will dissolve at a rate of 0.5 liters of mash for every 20 liters of water.

Free of toxicity.

allowed for organic farming product.

Blossom Builder Liquid is a booster for the final stages of fruit formation, intended for use in the last 4 weeks of flowering until pre-harvest.

Blossom Builder Liquid ® will maximize fruit structure. With a unique P:K ratio, it is suitable for all types of substrates, such as soil, hydro and coconut, and for all types of irrigation systems. N:P:K - 0:20:32 (w/w)

Delta 9 Cannabiogen mark a before and after in your crop. It is the most potent metabolic biostimulator, perfect to combine with basic fertilizers.

Its use increases the crop by 30% and flowers produced in a larger amount of resin. А minimum of three applications is needed, it is preferable to perform four: two for spraying on the ground and two irrigation

Handy manual trimmer that helps significantly shorten the time to remove the leaves.

It has a transparent plastic cover for better visibility, removable handle for convenient handling and removable grille for easy cleaning. This machine removes twigs and leaves, while retaining "colors" full without hurting them. Spin leaf does the work of 30 scissors! The kit contains a rubber seal and set of knives..

dimensions:

• Diameter: 43 cm
• height: 31 cm

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers.BudBox™ Pro comes in an all new extra strong carry bag.

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum.

With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers. BudBox™ Pro comes in an all new extra strong carry bag.

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture.

Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers.BudBox™ Pro comes in an all new extra strong carry bag.

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture.

Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers.BudBox™ Pro comes in an all new extra strong carry bag.

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers.BudBox™ Pro comes in an all new extra strong carry bag.

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers.BudBox™ Pro comes in an all new extra strong carry bag.

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum.

With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers.BudBox™ Pro comes in an all new extra strong carry bag.

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers.BudBox™ Pro comes in an all new extra strong carry bag.

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture.

Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers.BudBox™ Pro comes in an all new extra strong carry bag.

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture.

Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers.BudBox™ Pro comes in an all new extra strong carry bag.

The all new ground level irrigation ports

As well as increasing the size and number of all ventilation ports we have added ground level irrigation ports on the left and right hand side panels. This new port is the answer we have all been looking for when using floor based gravity feed systems and pump fed flood and drain pots. The positioning of the vent will permit the user to utilise either side of your BudBox™ to run pipe-work, both in and out of the tent, through a really neat double cuffed port, it’s a simple solution to the problem.

New Connectors
The whole BudBox™ Pro range is now equipped with steel, push & click fit connectors, which, in addition to the thicker tempered steel poles, provide greater load bearing strength for all your filters, fans and lighting requirements.

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat our poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look. BudBox™ assembly instructions are in set out in a clear, concise, easy to follow format, all canvasses are zipped on 3 sides top & bottom, ensuring that erection remains simple & straightforward.

BudBox™ PAR Testing Results

Light
Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum.

With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

BudBox™ PAR Test Results - 1.694 PAR

The inner skin of your BudBox™ grow tent is not just a simple piece of white or silver material, the nature of manufacturing such materials is highly skilled and, as such, there are only a small number of manufacturers in the world that can do it properly and to a consistent quality. Our philosophy on this subject is and will remain the cornerstone of our success and is not open to negotiation or compromise, WE USE THE BEST THERE IS ! All the component parts used in the construction of BudBox™ are sourced, tried & tested and are guaranteed safe for plants and people to use.

Light Proof
One of the most important factors when looking at the material is whether or not it is light proof. When shopping for your grow tent, ask the retailer/shop to test the light fastness, by simply holding a 600watt MH HID 35cm from the material, see if you can see any light passing through, try that with a BudBox™ and we guarantee YOU WON’T see any light, if light is coming out, light is getting in! The whole concept of the grow room was founded on controlling your growing environment’s light & dark period, which synthesizes the daily cycle of light & dark your plants need to develop. Plants develop their flowering hormones during the night/blackout period, which if compromised by the slightest bit of light, will be destroyed.

New Frame
The BudBox™ Pro range continues to be based around the growing area principal of 1 metre and 1.2 metre and now an all new 1.5 metre squared area, but now has been upgraded! The Pro has a strong tempered 16mm diameter pole in our 75 and 100 range, and a 25mm diameter tempered high tensile steel pole for all units ranging from from XL (1.2) up to the massive Titans, ensuring you have all the strength that you need in the big tents to hang heavy filters and lighting rigs. The smaller sizes reflect the lighter loads needed.

All new inspection doors
The new BudBox™ Pro has multiple inspection hatches, which have been positioned to the rear & side elevations of the Titan range. These doors have been included to enable the most convenient access to the full tent, at all times, without having to unzip the whole side. You can now reach right in to tidy up plants or move lights and inspect your crop like never before. The Titan 1, and Titan+ models have 2 extra inspection hatches on the sides and the Titan 2 and Titan 3 have extra hatches on the sides and the back wall.

All new plastic clips to hold doors open
When open, the doors are held open with new clips instead of Velcro, which we feel is a more practical & neater solution.

Zips
As is always with BudBox™ all our tents unzip at the top and bottom, right around 3 sides, giving you unparalleled access to the plants as well as making assembly easy. The BudBox™ Pro now comes with the addition of extra door flaps in the sides and rear of the Titans, so you now have every entry option you need covered.

The new easy grip branded zip puller makes opening and closing the tent easy, even with wet fingers.BudBox™ Pro comes in an all new extra strong carry bag.