tank up to 80L

Water pump for installation in or outside the tank.

High quality ABS plastic housing. Ceramic anti-corrosion shaft, resistant to any solutions. It is suitable for high-pressure systems.

It is suitable for tanks around 80L and drip systems.

• Flow rate: 800L/h
• Height of water column: 1.0m
• Power: 8W
• Input voltage: 220-240V 50Hz
• Outlet diameter: 12mm
• designed for long-term use
• dual water-cooling design for quick heat dissipation
• applicable to all hydroponics needs - pumping, aeration, NFT, filtration
• suction cups for secure attachment in the tank

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 8W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 600 l/h
• Max Hight: 1 m

Manufactured with high quality plastic materials inside a sealed structure, its engine manufactured completely watertight and cooled by oil, which has a filter inside to avoid obstructions in the operating mechanism, it consists of a thermostat that stops the engine in case of overheating.

You must always have it in the water for proper use and never deeper than 2mt. You should not work with it in temperatures above 35º

Depending on the flow or the dimensions of the hose that we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you are going to use an irrigation lance it is recommended at least 2000l / h for a bit of water flow, with 3000l / h you will get a normal pressure and with 4000l / h you will get the ideal pressure for the lance. 

If its use is going to be used for drip irrigation, a minimum of 1000l / h is recommended for each square meter of crop.

Specifications:

• Depth max: 2 mt
• 10mt power cable.
• Power: 10 W
• Maximum height: 1 mt
• Flow rate: 600 L / H
• Voltage / Frequency: 220-240v / 50hz