Products
WATER PUMP 18W ( GPG)
It uses high-strength wear-resistant shaft core, has highly efficient energy-saving, and long service life.
- Flow rate: 1200L / h
- Height of the water column: 2 m
- Power: 18W
- Input voltage: 220-240V 50Hz
- Output diameter: 12mm
- designed for long-term use
- double water-cooled construction for quick heat removal
- applicable to all hydroponics needs - pumping, aeration, NFT, filtration
- suction cups for secure fastening in the tank
Watermaster 1000L/h water pump
This pump can be used for small drip systems up to 1 m2 max.
Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.
- Power: 22W
- Voltage:220-240V
- Frequency: 50 Hz
- Pump rate: 1000 l/h
- Max Hight: 1.60 m
NeptuneHydroponics NH1000 water pump
Manufactured with high quality plastic materials inside a sealed structure, its engine manufactured completely watertight and cooled by oil, which has a filter inside to avoid obstructions in the operating mechanism, it consists of a thermostat that stops the engine in case of overheating.
You must always have it in the water for proper use and never deeper than 2mt. You should not work with it in temperatures above 35º
Depending on the flow or the dimensions of the hose that we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you are going to use an irrigation lance it is recommended at least 2000l / h for a bit of water flow, with 3000l / h you will get a normal pressure and with 4000l / h you will get the ideal pressure for the lance.
If its use is going to be used for drip irrigation, a minimum of 1000l / h is recommended for each square meter of crop.
Specifications:
- Depth max: 2 mt
- 10mt power cable.
- Power: 22 W
- Maximum height: 1.6 mt
- Flow rate: 1000 L / H
- Voltage / Frequency: 220-240v / 50hz