LED Lighting

Ultra thin LED panel for growth and flowering

LED panel with a design of 225 pcs. (60pcs blue, 165pcs red) super bright LEDs, 60 degree reflector, ultra slim design, perfect for any kind of indoor plants - for vegetation and flowering. With a full spectrum 6-Band: 380nm ~ 740nm, which include red / blue / UV / IR and provides plants with all the necessary light in all stages. The LED panel is highly efficient! No fan, no noise. Easy to use!

Attention:

• Protect from high humidity NOT waterproof. Suitable for indoor use only.
• UV and IR LEDs appear dimly glowing, this is normal to the naked eye, don't worry.
• Do not touch the light with a wet hand while the lamp is working.

Full spectrum LEDs provide excellent coverage and maximum PAR output

• Built-in cooling fans and a heat-dissipating, composite shell protect against overheating
• Energy efficient design results in the most efficient yield possible
• Estimated life expectancy 100,000 operating hours

PAR determines the type of light needed to sustain photosynthesis in plant life. Through photosynthesis, plants can convert light energy into chemical energy, which is the food they use to grow and flower.

Because of photosynthesis, plants need a lot of red and blue light to support growth and flowering. This lamp has red and blue light. In addition, some other necessary spectra have been added, such as 73 Onm, which is very useful when planting.

Full spectrum LEDs provide excellent coverage and maximum PAR output

• Built-in cooling fans and a heat-dissipating, composite shell protect against overheating
• Energy efficient design results in the most efficient yield possible
• Estimated life expectancy 100,000 operating hours

The growth, fruiting, hardiness and even flowering time of plants are completely dependent on the light they receive. The quality and intensity of the light, as well as the duration of illumination, are extremely important! Building the right lighting system would guarantee you excellent results. LED lamps are the latest innovation in lighting systems for indoor growing. Their advantage is lower energy consumption, less heating compared to HPS and MH lamps and their longer life.

Features:

• Optimized Full Spectrum
• Dimensions: 270*283*85mm
• Life: > 50,000 hours
• LED pcs.: 60pcs x 3W BridgeLux / Epistar LEDs
• Maximum power: 180W
• Average power: 140W
• View Angle: 90 degrees and 120 degrees mixed LEDs
• Operating temperature: -20 to 40 degrees
• 2200Lm
• Illuminated area : about 1.0m².

Features:

• Optimized Full Spectrum
• Dimensions: 383*283*85mm
• Life: > 50,000 hours
• LED pcs.: 90pcs x 3W Bridgelux / Epistar LEDs
• Maximum power: 270W
• Average power: 200W
• Angle: 90 degree and 120 degree mixed LEDs,
• Operating temperature: -20 to 40 degrees
• 3600Lm
• Illuminated area: about 1.5m²

Features:

• Optimized Full Spectrum
• Dimensions: 609*283*85mm
• LED pcs.: 150 pcs x 3W Bridgelux / Epistar LEDs
• Maximum LED power: 450W
• Average power: 364W
• View Angle: 90 degrees and 120 degrees mixed LEDs
• Operating temperature: -20 to 40 degrees
• Life: > 50,000 hours
• 6000Lm
• Illuminated area: about 3.0m²

Features:

• 12000lm
• Dimensions: 1174*283*85mm
• 15 diodes per module
• PAR reading: 1600μmol/m2/s at 30cm distance
• LED pcs.: 300 pcs x 3W Bridgelux / Epistar LEDs
• Maximum power: 900W
• Average power: 630W
• Angle: 90 degrees and 120 degrees mixed LEDs
• Operating temperature: -20 to 40 degrees
• Illuminated area: about 6.0m²

Flexstar Undercanopy LED light 120W - lamp for flowering and growth. A suitable light source for the entire development cycle from vegetative to the end of flowering.

The TOMAX 645W SE LED Grow Light features 6 LED bars, a high-quality driver and efficient LEDs, generating a full spectrum for every stage of your plants' development. A suitable light source for the entire development cycle from vegetative to the end of flowering . The lamp has a dimmer to adjust the power according to the needs of the plants and the stage of their development.

TOMAX 645W Foldable LED Grow Light is designed with 6 LED bars, high quality Inventronics driver and Samsung and Osram LEDs, generating full spectrum. A suitable light source for the entire development cycle from vegetative to the end of flowering. For the different varieties and periods, the lamp has a dimmer to adjust the power according to the needs of the plants and the stage of development.

The Lumatek LED VF 90W is an ideal solution for lighting young plants, especially when using vertical growing methods – hence the name of the VF (Vertical Farming) series. This highly efficient and versatile LED lighting provides excellent results at every stage – from seed germination to propagation and development in nurseries.

The LUMATEK ZEUS 600W PRO 3.1 LED is a high-performance, multi-light aluminum LED luminaire designed for maximum efficiency. It delivers a PPF of 1990 µmol/s and an impressive photonic efficiency of 3.1 µmol/J . Thanks to the transparent protective layer on the LED strips , the light transmittance reaches 99% , which reduces light loss, extends the life of the diodes, increases corrosion resistance and provides IP65 protection .

For different phases of growth and reproduction , the LUMATEK ZEUS 600W PRO 3.1 features adjustable power without compromising on efficiency. The 6-LED strip configuration ensures a lower operating temperature , improving light intensity and longevity of the luminaire.

The Lumatek Zeus 600W Pro 2.9 LED is a linear LED panel producing a high PPF of 1770 µmol/s and a Photon Efficacy of 2.9 µmol/J.

Lumatek brings you even closer to the perfect LED light fixture, the brightest just got brighter.
The new 2.9 line of Lumatek Zeus is built using high quality Lumatek drivers and the latest generation of higher efficiency LEDs from Lumileds and Osram , generating a full spectrum light source ideal for vegetation and flowering cycles.

The LUMii XLEDv6 680W LED Luminaire is a high-performance, high-efficiency mid-range 6-bar LED luminaire. It comes with a DC driver that has fold-out brackets that allow it to sit on top of the fixture.

If you need quality LED lighting at the best price, LUMii BLACK 720W LED is a great choice!

If you need quality LED lighting at the best price, LUMii BLACK 720W LED is a great choice!

Being widely used in greenhouse cultivation, plant factory, flower breeding, indoor garden, water soluble, pipeline cultivation, farm, pot culture, tissue culture and so on

• Ideal for all phases of plant growth, and works well with water solution culture and soil culture.
• Working environment: -20-40 ℃ ， 45% -95% RH
• Size: 104.90 x 3.56 x 2.69 cm
• Working power: 84W
• Luminous flux ((): 1500 Lm
• Input voltage (Vin): AC 100-240V, 50Hz
• Lighting angle ((): 120 °

LuminiGrow 450R1 uses approximately 60% less power than a 1000 watt HPS lighting, and produce crops with better yields.

Plants in different phases of growth require different intensity light. Approximate power consumption on vegetation mode is around 170 W, on bloom mode 290 W and on full spectrum mode 395 W. LuminiGrow 450R1 provides 4 adjustable channels which allow you to save energy by reducing intensity for young seedling.

Heat Dissipation

•   Aluminum fins heatsink cooling and speed-controlled fans to dissipate, low noise level. 70% cooler than HID lighting, cool the LEDs below 50 C.
•   We apply PWM tech to control the fan, improving control of brightness, and control of fan speed and noise.
•   With self-detection function, once the fan stops working, the LED brightness would darken to 20% so as to protect the light.

Full Spectrum
  LuminiGrow 450R1 provides full spectrum from UV to IR to stimulate plant growth. 100% absorbed by your plant. It can work well with any vegetables, flowers, medical plants.
  With the use of our Smart Controller, growers can customize the exact spectrum, intensity for all phases of growth and all plant types.

Control
  We use the newest popular technology DMX and PMW control way, digital signal demand, more steady.
  There are 4 individually adjustable channels, timing and dimming, including: Automatic, Manual, Veg, Bloom, UVB, Full spectrum working modes, daisy chain is compatible, automatically save the setting parameter for the next time users’ setting.

Master WI-FI Controller

 - LuminiGrow System uses the newest Technology Wifi ( 802.11) via the Android or iOS 
wirelessly connection, never off signal.
-The new standard in control platforms

-Timing & dimming 24 hours cyclic

-The latest DMX intelligent control, much more steady signal.

-Light intensity can be transformed from 0-100%

-4 adjustable channels, customize kinds of color bands by yourself.
 
-Auto, Manual, Bloom, VEG, UVB, full spectrum working modes

Simply Set up 

•   Attach the Wifi Master Controller to Lumini lighting fixture, and search the Master’s Singal through your iPAD, Smart phone. Then you can program you lights through our software. 
• We have released both Android and iOS App, please search for “Lumini Control System” on 
• Google Play or Apple App store to download. User name is: lumini. Password: lumini123.

IR Remote control

 - Steady infared signal, slim and elegant design, the most simple way to control Lumini grow 
lights!
-Intensity can be set from 0%~100%

-Each channel has a plus and minus button

-The latest DMX intelligent control, much more steady signal.

-Light intensity can be transformed from 0-100%

-4 adjustable channels, customize kinds of color bands by yourself.
 
-VEG, Bloom mode to simulate the exact spectrum for different phase of plant growth

Power Supply

  LuminiGrow 450R1 uses one UL approved MeanWell driver, integrated power supply, output below 48V, safe and secure. 
  Constant voltage and constant current technology to protect extend lifespan, while most brands just use constant current. 
  

• Actual Wattage    390~400W
• HPS Wattage Equivalent    1000W
• Input Voltage    85-265V AC Power Input
• Input Current    1.8 amps @ 220V; 3.8 amps@110V 50/60 Hz
• Output Voltage    UL Standard Output Voltage – Less than 48V DC
• LED    162pcs 3W LEDs
• Driver    1 MeanWell Driver
• Beam Angel    90° 
• Lumen    11000~12500lm
• Illumination(1.0m)    >12000Lux
• PAR value(50cm)    720μmol/m2/s
• Footprint    1.2m×1.5m

Dimensions
                                                                                        

• Length: 19.00 inches
• Width: 11.00 inches
• Height: 4.30 inches
• Weight: 17.00 pounds

LED panel for growth and flowering

LED panel with 54pcs design. super bright LEDs, the aluminum housing, ideal for all indoor plants - for vegetation and flowering. Full 6-Band Spectrum: 380nm ~ 740nm, which includes red / blue / white / UV / IR and provides plants with all the necessary light at all stages. The LED panel is highly efficient!

Attention:

- Keep away from high humidity NOT waterproof. Suitable only for indoor use.
- The ultraviolet and infrared diodes look low-light, it's normal for the unbridled eye, do not worry.
- Do not touch the lamp with a wet hand while the lamp is running.

The Jackson 150W – LED lighting with an advanced spectrum for growth and flowering.
✔ Over 1.5g/W yield
✔ Increased quality – more resins and terpenes
✔ Gentle temperature
✔ Compact size with large coverage
✔ Perfect spectrum for maximum results

Ocean Revive Reflector 400w 

Ocean Revive has been a popular brand name in the aquarium lighting niche for some time now. Since then, they’ve released some of the most cost-effective lights that live up to their name. Recently, they released their latest led grow light, the Ocean Revive Reflector 400w panel. It’s an affordable, easy to use, and reliable light, but does it stand up to the test? We got our hands on it and found out for ourselves.

SPECTRUM

With growing any kind of plant indoors, it’s important to have an even spectrum that will create fast and healthy growth through proper photosynthesis. This panel uses a specific spectrum of Red (620-630nm/650-660nm), Blue (430-440nm/450-460nm), and White (3000-4000K/6000-9000K).

COVERAGE AREA

The Ocean Revive Reflector 400w LED grow light uses Bridgelux LEDs in a blend of one hundred 3w diodes, and twenty 5w diodes for an intense and even light coverage of up to 3 ft. x 3 ft. Although they claim that this is enough light for 9 flowering plants, it solely depends on how large or small these 9 plants are. We think this panel would work best for a 3 ft. x 3 ft. vegging room, and a 2.5 ft x 2.5 ft flowering room. Seedlings love this lamp too, just make sure to keep the panel at least 20 inches away from the canopy to avoid and bleaching.

Like most LED panels, the Ocean Revive Reflector 400w doesn’t run that hot. Thanks to a proper cooling system that uses a three part heat management system, you won’t have to battle with extremely high temperatures that can have a drastically negative effect on the plants life cycle. It consists of a thermal management system that utilizes finned aluminum heat sinks and ultra quiet dual fans that keep a breeze running through the panel at all times. Proper cooling and ventilation are necessary, otherwise the LEDs simply wouldn’t perform as expected as they would lose a great deal of their efficiency.

Although the Ocean Revive Reflector LED grow light is stated as a 400 watt panel, this isn’t the actual amount of watts it uses from the wall. When plugged in and operating in flowering mode, it uses around 200 watts of total power. The 400w rating is given because the lamp is comprised of a blend of 3w and 5w diodes that add up to 400, but since they aren’t driven to full capacity, you can expect them to always function without interruption or burning out. In fact, each diode is equipped with a Zener to ensure that is one diode burns out, the rest will still perform.