Air cooled reflectors

With this kit you can modify a Cooltube of 125mm the Reflector Adjust A Wings, since without these pieces, it is difficult to fit the tube to the Wings.

You will benefit from the advantages of taking the heat out of the cooltube, reflecting more the crop zone with the Adjust A Wings.Very easy to assemble, since the pieces only fit in one place, and if you have doubts, we can always help you.

You will get the benefits of a Cooltube, which will cool the growing room better and get lower to 3ºc of temperature. And we get the many advantages of the Adjust A Wings which will better distribute the light spectrum of your light bulbs.

With this Kit you will significantly improve your results, visible from the first crop.

Gloria reflector with cooling Ф150mm

This reflector gives your garden the light it needs, without unnecessary heat.

Features:

• Wide spread of light allows plants to be spaced close together for maximum light in low light areas
• Made of heavy-duty, pre-galvanized steel
• The fully sealed glass ensures a snug fit
• Made from precision 95% reflective European aluminum
• Comes with built-in socket, 5m power cable and hanging hooks
• Reflector size: 50CM x 70CM x 20CM

SPUDNIK is an ideal aircool reflector, providing lamp cooling by allowing the hot air around the lamp to be drawn out of the room before it has a chance to create high heat.

SPUDNIK has been the choice of professionals for years, with an extremely efficient reflector: 97% reflectivity!

• 97% reflectivity
• Miro9 - internal reflector
• Includes 4mm thick glass sheet
• Flange - 125mm (5") or 150mm (6")

The reflector is suitable for 400W and 600W lamps.

• Attach a small fan and it will blow the hot air out of the lamp.
• In this way, the temperature of the lamp will be reduced by up to 30-40%.
• The lamp can be moved closer to the tops of the plants.
• Perfect for rooms where several lamps are connected.
• Diameter Ø 125 mm
• LENGTH 300 mm

Monster Warriors Ф200 Air-cooled reflector for 400 W, 600 W and 1000 W sodium (HPS) and metal halide (MH) lamps

Reflects up to 99% of light.

• Reflector size: 60 x 62 x 30cm
• The size of the holes is Ф200mm

Monster Warriors Ф150 Air-cooled reflector for 400 W, 600 W and 1000 W sodium (HPS) and metal halide (MH) lamps.

Reflects up to 99% of light.

• Reflector size: 60 x 62 x 30cm
• The size of the holes is F150

The Raptor 8" was developed for those who want more.

Closed-type coolable reflector. Heat-resistant glass protects and limits heat. It is equipped with two F200 ventilation holes. The socket has four positions for moving horizontally. The Raptor 8" Dual is equipped with two sockets. Two identical bulbs (HPS or MH) or two different ones (HPS and MH) can be included. Capacity: two bulbs.

• Reflector dimensions: 105cm x 77cm x 27cm.
• Carton dimensions: 110cm x 84cm x 34cm.
• Dimensions of the flanges: Ф200.
• Cable length: 4m
• Reflectivity: 95%
• Ability to move the lamp horizontally
• suitable for two lamps: 600-1000W HPS and MH
• Warranty: 5 years

Raptor 8" is designed for those who want more. Closed-type cooling reflector. Heat-resistant glass protects and limits heat. It is equipped with two Ф200 ventilation holes. The socket has four positions for moving horizontally. Capacity: one bulb .

• Reflector dimensions: 105cm x 77cm x 27cm.
• Carton dimensions: 110cm x 84cm x 34cm.
• Dimensions of the flanges: Ф200.
• Cable length: 4m
• Reflectivity: 95%
• Recommended ventilation: 1100m3/h
• Warranty: 5 years

Completely sealed with double glass and an airtight seal, this reflector has a stable construction and a stopper that prevents it from falling down sharply.

It has 6 integrated fittings in the case and air-cooling design. The body is made of galvanized steel and highly reflective, textured aluminum. Includes socket and 4.5m cable.

• Hole size: Ф150
• Manufacturer: Sun System
• dimensions: 64 x 39.70 x 27.60 cm

These fantastic reflectors are truly exceptional in controlling the temperature of the grow room and as a result; providing high yields.

Featuring tempered 4mm flat glass to keep heat away from your plants, it can vent heat through the two vents that can be connected to an air duct only or a small fan. The reflector features highly reflective interior wings to maximize your light output, and your plant will be able to grow up to inches below the reflector .

This is a highly efficient way of lighting any large room and several Aerowings can be joined together creating highly efficient lighting. Each kit comes with hanging hooks, an adjustable socket, 5 meters of cable with IEC connection, as well as a glass panel and frame.

• It can be connected to a 150mm air duct.
• Dimensions: 20 x 60 x 54cm

SPUDNIK is an ideal aircool reflector, providing lamp cooling by allowing the hot air around the lamp to be drawn out of the room before it has a chance to create high heat.

SPUDNIK has been the choice of professionals for years, with an extremely efficient reflector: 97% reflectivity!

• 97% reflectivity
• Miro9 - internal reflector
• Includes 4mm thick glass sheet
• Flange - 125mm (5") or 150mm (6")

The electronic version of Master gear has high power factor, lower power loss, open output circuit and short circuit protection.

The output power varies +/- 3% when the input voltage varies between 20% and 18%. Lamp voltage varies within ANSI standards. Stable output power, can increase lamp life by 30% and reduce color temperature deviation. Easy installation!

• Lamp Type: High Pressure Sodium Lamps
• Rated power: 600W
• Length: 355 mm
• Width: 150 mm
• Height: 90 mm

The chokes (ballasts) regulate the voltage supplied to the selected lamp, to the operating voltage for it and ignite the lamp, creating a high-voltage pulse after the interruption of the current from the starter. They are divided into two types - electromagnetic and electronic ballast. The difference between the two is that the electronic ballast does not require a starter and is usually lighter and heats up less. Other benefits are quieter operation than a conventional ballast, an increase in lamp life by 30% - 50% and reduced light flux pulsations.

​Electronic ballasts change the flow of current in the light bulb using a series of induction coils that are separated from each other. Unlike the magnetic ballast, they use one induction coil, not a series of coils. The pulse sent from the ballast to the lamp is faster, which reduces energy consumption. Electronic chokes do not heat up during operation.

Wide spread of light allows plants to be closely spaced for maximum light delivery in low light areas. Fitted with safety cables for safe and easy maintenance, constructed from galvanized steel.

The fully sealed glass ensures a tight fit to the reflector body. Made from precision 95% reflective, European aluminum . Comes with built-in socket, pre-wired, complete with hanging hooks.

• High quality aluminum
• The safety cable holds the glass door in place
• Fully sealed with hinged glass
• Built-in socket
• Dimensions: H/W/D 25cm x 68cm x 90cm
• Accepts: HPS / MH bulbs from 400W to 1000W