PH

• The Milwaukee MW100 PRO pH meter features manual calibration and fast operation in a rugged design.
• The Milwaukee MW100 PRO pH meter is ideal for pools and hydroponics.
• The MW100 provides fast results to ±0.2 pH accuracy with two-point manual calibration.

Тhese tools are widely used.

With an IP65 waterproof housing and replaceable probe, the tester is suitable for many applications, such as a measuring instrument from wastewater treatment to agriculture. The modular design allows easy replacement of probe and battery.

PH54 is a waterproof pH tester with 2 points for manual calibration, ± 0.1 pH accuracy and a range from 0.0 to 14.00 pH.

Specifications:

• Measuring range: 0.0 - 14 pH
• Resolution: 0.1 pH
• Accuracy: + -0.1 pH
• Environment: 0 to 50 ° C; max. RH 100%
• Calibration: manually at 2 points using trimmers
• Electrode: MA73600 (replaceable)
• Power supply: 3x 1.5V (included)
• Battery life:> 1500 hours of continuous use
• Dimensions: 165 x 30 x 30 mm

Calibration:

- Immerse the switched off tester in a glass of tap water

- Move it while it is still switched off in buffer solution 7.0

- Unscrew the cap and use the supplied screwdriver to set the display to 7.0

- Dip the tester briefly in the glass of tap water and shake gently

- Immediately move the tester to buffer solution 4.0

- Use the supplied screwdriver to set the display to 4.0

- your tester is calibrated!

pH monitor for constant monitoring of hydroponic or fertilizer solutions, aquariums and aquaponic systems, pools, etc.

Convenient function for visual indication when the pH of the solution passes a set value (up or down, selectable by knob). The MC122 controller and dosing pump (MP810) provide fully automated pH control of aqueous solutions in hydroponic systems. It is specially designed for pH management in tanks containing nutrient solution. The small and precise flow of the peristaltic pump allows to maintain ideal pH values in your tank.

After selecting the desired pH setting (from 5.5-9.5), the controller measures the pH value of the solution and automatically adds a pH correction (acids or bases) to adjust the pH of the liquid to the selected level. Manual calibration at 2 fixed points - pH 4 and pH 7. Separately connectable sensor, compatible with pH-monitors of other manufacturers.

Professional pH meter

Professional waterproof pH meter with temperature display, automatic temperature compensation, and automatic 2-point calibration. "HOLD" function to store the measured value. Interchangeable sensor/probe .

• range: pH from -2.0 to 16.00;
• temp. from -5.0 to 60.0°C
• resolution: 0.1 pH; 0.1°C
• accuracy: ±0.1pH; ±0.5°C
• calibration: automatic, one or two points (at pH 4, 7, 10 or 4, 6.86, 9.18)
• automatic temperature compensation from -5 to 60°C
• working conditions: temp. -5 to 50°C, humidity up to 100% batteries: 4 pcs. LR44 1.5V /
• 300 hours of work
• automatic shutdown: after 8 min.
• dimensions: 200 x 38 mm / 100 g
• Manufacturer's warranty - 2 years for the device, 6 months for the sensor. Does not apply to mechanical damage and improper operation!

Calibration:

- Immerse the unplugged tester in a cup of tap water for 2 hours

- Transfer it while it is still switched off to buffer solution 7.0

- Turn on the tester from the "ON/OFF/CAL" button

- The display will show the calibration value and the temperature in Celsius

- Press and hold the "ON/OFF/CAL" button until the display shows "CAL"

- The display will read "REC", then a value of 4.0, "OK 1" and "USE".

- Immediately transfer the tester to buffer solution 4.0

- The display will read "REC", then "OK 2" and "USE".

- your tester is calibrated!

- Suitable calibration solutions can be found here , here and here

- You can find a suitable storage solution here

Video instructions (English)

Professional pH-monitor for long-term use

The devices of the MS series are designed for constant monitoring of pH, EC or TDS values, directly in the tank. Each unit has a mode selection that is set by the user. The LED indicator activates and starts flashing when the pH, EC or TDS level changes above or below (user selected) the set value.

The pH-monitor for constant monitoring of hydroponic or fertilizer solutions , aquariums and aquaponic systems, pools, etc. has a convenient function for visual indication when the pH of the solution passes a set (by the grower) value (up or down, as selected by a knob).

• Manual calibration at 2 fixed points - pH 4 and pH 7.
• Separately connectable sensor compatible with pH monitors of other manufacturers.
• LED alarm
• Supplied with 12 VDC adapter, mounting kit and 20ml pH 7.01 calibration solution
• Dual, cruciform pH electrode with two meter cable (BNC connector)

Manufacturer's warranty - 2 years for the device, 6 months for the sensor. Does not apply to mechanical damage and improper operation!

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir.

An LED alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and calibration solution.

• Professional pH monitor especially designed for use with aquariums.
• User selectable Hi/Low Set Point 
• Manual 2 points calibration 
• Visual LED alarm 
• Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution 
• Double junction pH electrode with 2m cable (BNC connector)

pH 600 Specifications

- Range 0.0 - 14.0

- pH Resolution 0.1

- pH Accuracy ± 0.1 pH

- Calibration 1 Point (7.0) - Manual

- Environment 32 - 122F

- Display LED

- Battery Life 700 hours of use

- Battery Type 1.5v Button - 3 Included