Controllers and heaters
Controllers and heaters are essential devices for maintaining stable conditions in hydroponic and aquarium systems . Controllers allow for automatic regulation of temperature, humidity, and other key parameters , ensuring optimal plant growth or comfort for aquatic life. Heaters maintain the desired temperature of the water or solution, especially during cold months or at lower ambient temperatures. With these devices, you can be sure that your plants or aquarium animals are in the best possible conditions for development and health.
GSE Water timer 10A
The timer for irrigation systems GSE serves to control the pump.
Dimensions and technical specification:
Body: WxHxD= 130x92x105mm
Irrigation controller: WxHxD= 160x130x105mm
Designed for: 2'300W 10A (ind. 3A)
Voltage: 230V / 50Hz
Protection class: IP54
Water Master 100 W - Heater for liquids
The Calentador 100W water heater with thermostat is made of high quality materials.
This product can maintain the desired temperature of the nutrient solution in your tank or of liquids with such consistency. We recommend watering your plants with water at a temperature between 20 ° - 24 ° to be healthy.
Technical data:
- AC 220-240V / 50Hz, 60Hz
- Double sealed material
- Fully waterproof
- Temperature controller
- Includes two suction cups to hold it to the tank
- Length 30 cm
Water Master 200 W - Heater for liquids
The Calentador 200W water heater with thermostat is made of high quality materials.
This product can maintain the desired temperature of the nutrient solution in your tank or liquids of such consistency. We recommend watering your plants with water between 20° - 24º to keep them healthy.
Technical data:
- AC 220-240V / 50Hz, 60Hz
- Double sealed material
- Fully waterproof
- Temperature regulator
- Includes two suction cups to attach it to the tank wall
- Length 30 cm
Water Master 300 W - Heater for liquids
The Calentador 300W water heater with thermostat is made of high quality materials.
This product can maintain the desired temperature of the nutrient solution in your tank or of liquids with such consistency. We recommend watering your plants with water at a temperature between 20 ° - 24 ° to be healthy.
Technical data:
- AC 220-240V / 50Hz, 60Hz
- Double sealed material
- Fully waterproof
- Temperature controller
- Includes two suction cups to hold it to the tank
- Length 40 cm
Water Master 500 W - Heater for liquids
The Calentador 500W water heater with thermostat is made of high quality materials.
This product can maintain the desired temperature of the nutrient solution in your tank or of liquids with such consistency. We recommend watering your plants with water at a temperature between 20 ° - 24 ° to be healthy.
Technical data:
- AC 220-240V / 50Hz, 60Hz
- Double sealed material
- Fully waterproof
- Temperature controller
- Includes two suction cups to hold it to the tank
- Length 40 cm
Neptune Hydroponics Water Heater 300W - heater for liquids
Liquid heater Neptune Hydroponics Water Heater 300W (NH300W)
- Fully submersible hull.
- Chrome-nickel spiral heating coil, extends the life of the heater.
- For fresh or salt water.
- 2 mm thick impact-resistant glass body.
- Manual rotation for temperature selection.
Features :
Power consumption: 300W - For tanks with a volume of 250-300l
Adjustable temperature between 20 and 34ºC
Power 300w
For aquariums up to 300 liters.
Height 33 cm
Cable: 1.4 m
Voltage: 220-240V
WATER FLOW METER -Water meter
WATER FLOW METER
A water meter that you can connect directly to a tap or hose.
Measurement in liters and gallons.
Controls partial and total liters by simultaneously displaying both values on the large LCD screen.
This way we know the amount of water we give each plant and the total liters used.
Water Timer Hydromate - Analog Water Timer
Suitable for controlling irrigation systems in the domestic sector, such as lawn spreaders, sprinklers, drippers, etc.
- High quality plastic material, wear-resistant and anti-corrosion
- Automatic and intelligent, easy to operate
- Rubber seal design, leak proof and tight sealing
- Hose connection: 13 mm - suitable for all known plug-in systems
- Water temperature: less than 40 degrees
- Water connection: 21 mm faucet with 26.5 mm thread
- Batteries: 2 AAA batteries (not included)
- Water pressure: 1 - 4 KG
- Working pressure: 0 to 8 bar (0 psi to 116 psi)
instructions in the package
Plant it Watertimer
The water timer can be used with tap water from the outlet tap or with a gravity feed system from a tank. Simply select the time you want the water supply to start and stop, connect to your flow line and the timer will do the rest!
Water Timer Hydromate - digital water timer
100% Brand New & High Quality
Automatic and comprehensive watering service for your garden.
This Timer must be used only for the control of irrigation system, like lawn sprinkler, sprinklers, etc.
- Material: Plastic
- Weight: 0.33Kg
- Water Connection: 21mm tap with 26.5mm thread
- Hose connection: 13mm (1/2 ") - Suitable for all known plug-in systems
- Water Pressures: 0-400Kpa
- Water Temperature:. 0-40 o C
- Procedure: Singel/Multi Procedure, Routine, Cycle, Single Day, Multi Days
- Irrigation Frequency: min 1 time/day, max 16 times/day, max 1 time/3 days.
- Irrigation Time: min 1 minute, max 9 hours 59 minutes
- LCD Display: Standard Time/ Status of Irrigation Control
- Switch: Automatic/Manual
- Batteries: 2x 1.5V AAA size batteries
