Cleaning cloth for lamps and reflectors

All light bulbs must be wiped of fingerprints after installation. This microfiber cloth is perfect for that. Removes fingerprints and dust from lamps, glass, light fixtures, etc. Size: 40x40cm.

With this kit you can modify a Cooltube of 125mm the Reflector Adjust A Wings, since without these pieces, it is difficult to fit the tube to the Wings.

You will benefit from the advantages of taking the heat out of the cooltube, reflecting more the crop zone with the Adjust A Wings.Very easy to assemble, since the pieces only fit in one place, and if you have doubts, we can always help you.

You will get the benefits of a Cooltube, which will cool the growing room better and get lower to 3ºc of temperature. And we get the many advantages of the Adjust A Wings which will better distribute the light spectrum of your light bulbs.

With this Kit you will significantly improve your results, visible from the first crop.

Adjust A Wing Socket 

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but it is made of a different grade of aluminum.

Includes Heat shield Spreader.
The Tomax has the same benefits as the original AdjustAWings, including an impressively low-hanging position over your plants and balanced light distribution. Economical double parabolic reflector. Control "hot spots" by attaching a "Heat shield Spreader"

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

*Lamp is not included in the set.

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but it is made of a different grade of aluminum.

Includes Heat shield Spreader.
The Tomax has the same benefits as the original, including an impressively low-hanging position over your plants and balanced light distribution. Economical double parabolic reflector. Control "hot spots" by attaching a "Heat shield Spreader".

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

Parabolic reflector for HPS & MH - Size: medium (diameter 89 cm)

• Aluminum on both sides
• Includes mounting hardware
• Reflector includes mounting bracket and lamp socket. The lamp can be installed vertically or horizontally
• The exclusive adjustable bracket allows the user to raise or lower the lamp inside the reflector

Feature:

• Innovative design: can be installed vertically or horizontally
• Easy to install
• Made of high quality aluminum
• It comes with a built-in UL-certified socket and a 4.5m power cord
• A lamp is not included in the set

This reflector has not only the advantages of its predecessors, but also acquired several new functionalities during its development.

The reflector can not only be adjusted in height, but can also be tilted and positioned according to your needs. Thanks to the middle reflector, maximum reflectivity is achieved. Therefore, the light is spread so evenly that the appearance of hot spots is almost zero and the use of an additional diffuser becomes unnecessary. Another novelty is the upper rail, which allows the reflector to be installed not only symmetrically, but also flexibly. No spreader needed - AZERWING does not have a spreader, this should provide better light dispersion compared to previous models.

Meanwhile, it turned out that the spreader can lead to concentrated shading and form a Doppler effect (that is, when more Adjust-A-Wings are mounted in parallel with spreaders, there is a danger of light overlap). In addition, it is not necessary to maintain a wide angle in places where several reflectors meet; on the other hand, it has a sharp angle that guarantees a homogeneous specific output without any hot spots.

Reflector wings have a finely forged structure – just like the Adjust-A-Wing. Prima Klima uses a new material for its reflectors – VEGA GREEN PVD coating, which reflects an optimized radiation background for plants.

• Adjustable socket
• No hotspot
• Guaranteed reflectivity up to 95%
• L/W/H 55 x 58-72 x 20 cm

This reflector is characterized by its absolute stability.

This reflector is characterized by its absolute stability.

Reflector made of finely polished aluminum, with E40 ceramic socket

This reflector can accommodate all lamps up to and including 1000w . Compatible with most chokes currently available.

• Dimensions: 50x50x16 cm
• Manufacturer: CIS

Pearl pro is a relief reflector developed by Adjust A wings that offers a more powerful light reflection (+ 5.1%) compared to a standard Stucco reflector.

With the same power consumption, it provides greater radiation over the area of interest. Pearl Pro will give you a higher yield! The same with more powerful light sources. Significantly better light distribution (+ 10%) compared to conventional mirror Stucco reflectors helps to reduce the number of hot spots and uniform light distribution.

Thanks to better light distribution and intensity, Pearl Pro gives you better coverage. Accordingly, crop uniformity will be better. Up to 60% more lumens compared to Stuсco!

• Use with ballast corresponding to lamp power - 1000W maximum
• New junction box design keeps moisture away from electrical connections
• Mounting metal plate supporting the weight of the lamp
• Secure connection method

Hobby version of the popular Avenger!

The shape of this reflector gives the same even light distribution and reflection as the Avenger, but is made from a lower grade aluminum and does not include the Super-Spreader.
The Enforcer has the same benefits as the Avenger, including an impressively low-hanging position over your plants and balanced light distribution.

The reflection is around 86% and is guaranteed to maintain its reflection for a minimum of 3 years

• Economical double parabolic reflector
• Control "hot spots" by attaching a "Super-Spreader"

Effect of Adjust A Wings ENFORCER:

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

Defender is a model created for the more professionally oriented growers.

It has all the qualities of the Enforcer model, but unlike it combines a combination of high-class technologies, aesthetics, strength, efficiency and easy installation. The main difference is that the Defender is made from extremely strong aluminum (H18), used in aircraft construction, which is extremely strong and extremely flexible.

This allows preserving the perfect parabolic curves, so important in light dispersion, otherwise vulnerable to changes when mounting and dismounting the reflector. In addition, the surface is covered with a titanium-white, heat-resistant polymer coating reducing the heat emitted by the lamp and having the property of spreading the light extremely evenly and having a reflectivity of 86% .

Adjust-A-Wings is a high-class reflector equipped with Super Spreader for even higher efficiency.

Manufactured from the highest quality materials, this reflector brings a number of benefits to both plants and gardeners.

• Twice the power and efficiency of most other reflectors on the world market;
• Increase the cultivation area, with each lamp, by up to 75%;
• Increases lamp performance up to 50%;
• Reduces heat, saves energy;
• Corrosion resistant;
• 97% Reflection;
• Super Alloy glass coating;
• Adjustable double, parabolic reflectors.
• Dimensions - 70cm x 55cm

Adjust-A-Wings is a high-end reflector equipped with a Super Spreader for even higher efficiency.

Manufactured from the highest quality materials, this reflector brings a number of benefits to both plants and gardeners. Designed for maximum efficiency, the Avenger model is made with a coating of fused glass and titanium dioxide, using PVD (Physical vapor deposition). technology - the most advanced technique for laying reflective surface layers on a number of work surfaces. This coating is the most reflective, most durable and sustainable coating known to science.

• Twice the power and efficiency of most other reflectors on the world market;
• Increase the cultivation area, with each lamp, by up to 75%;
• Increases lamp performance up to 50%;
• Reduces heat, saves energy;
• Corrosion resistant;
• 97% Reflection;
• Super Alloy glass coating;
• Adjustable double, parabolic reflectors.
• Dimensions: 100cm x 70cm
• Suitable for: 1000W or 2x400W, 2x600W sodium (HPS) or metal halide (MH) lamps
• Illuminated area: Up to 3.89 m2.

The reflector is suitable for 400W and 600W lamps.

• Attach a small fan and it will blow the hot air out of the lamp.
• In this way, the temperature of the lamp will be reduced by up to 30-40%.
• The lamp can be moved closer to the tops of the plants.
• Perfect for rooms where several lamps are connected.
• Diameter Ø 125 mm
• LENGTH 300 mm

SPUDNIK is an ideal aircool reflector, providing lamp cooling by allowing the hot air around the lamp to be drawn out of the room before it has a chance to create high heat.

SPUDNIK has been the choice of professionals for years, with an extremely efficient reflector: 97% reflectivity!

• 97% reflectivity
• Miro9 - internal reflector
• Includes 4mm thick glass sheet
• Flange - 125mm (5") or 150mm (6")

SPUDNIK is an ideal aircool reflector, providing lamp cooling by allowing the hot air around the lamp to be drawn out of the room before it has a chance to create high heat.

SPUDNIK has been the choice of professionals for years, with an extremely efficient reflector: 97% reflectivity!

• 97% reflectivity
• Miro9 - internal reflector
• Includes 4mm thick glass sheet
• Flange - 125mm (5") or 150mm (6")

Gloria reflector with cooling Ф150mm

This reflector gives your garden the light it needs, without unnecessary heat.

Features:

• Wide spread of light allows plants to be spaced close together for maximum light in low light areas
• Made of heavy-duty, pre-galvanized steel
• The fully sealed glass ensures a snug fit
• Made from precision 95% reflective European aluminum
• Comes with built-in socket, 5m power cable and hanging hooks
• Reflector size: 50CM x 70CM x 20CM

Using the "spreader", which reduces the heat emitted by the lamp, the reflector can be lowered 20cm above the tops of the plants. It can also be installed under the lamp to be able to get as close as possible to the tops of the plants, without the risk of burning. The light is diffused and reflected to the reflector for more even illumination. Suitable for lamps from 400W to 600W.

Using the "spreader", which reduces the heat emitted by the lamp, the reflector can be lowered 20cm above the tops of the plants. It can also be installed under the lamp to be able to get as close as possible to the tops of the plants, without the risk of burning. The light is diffused and reflected to the reflector for more even illumination. Suitable for 1000W lamps.

Reflector complete with two CFL 2x55W lamps.

Suitable for germination as well as the vegetation phase.