"Tomax 200" - 120x120x200 cm - set for growing plants indoors

Specifications:

• Light insulation - class A (100% light-proof).
• Made of highly reflective mylar (reflectivity 95%).
• Sturdy polypropylene corners.
• Strong load-bearing slats (hold up to 35 kg).
• Easy to assemble and convenient to use.
• dimensions (internal): 120x120x200 cm
• material: 600D - 95% reflection, light protection class II
• recommended lighting: 1x600W HPS, with cooling
• recommended ventilation: 100mm, min 180m3/h
• doors: one

The hottest technology in energy efficient HID lighting is now available!

Ceramic Metal Halide, or CMH for short (some call it CDM), is becoming increasingly popular in the horticultural industry. CMH lamps have a very broad light spectrum that is closer to the sun itself than any other form of HID lamp. CMH lamps also have an increased AR/Watt efficiency compared to other forms of HID lighting. The CMH fixture can be used as a main light; main light for SOG applications; or supplemental full-spectrum light for large crops.

*LAMP IS NOT INCLUDED IN THE KIT

Effective lighting in professional greenhouses!

Each 315 watt lamp produces light equivalent to 500-600 watts of traditional MH / HPS light. As these lamps use less than 350 watts of power , this means you can save up to 40% on your power bill while covering the same area. Most growers who use CMH lighting get higher yields and a big jump in quality.

CMH lamps are very good at growth and flowering, especially those with a warmer color spectrum (around 3000K), but no better than HPS in the red spectrum area.

• Ceramic metal-halide grow lamp
• Spectral distribution optimized for photosynthetic efficiency
• Blue spectrum for abundant plant growth and strength, red spectrum for flowering.
• Ceramic μmol output within the PAR spectral region (Photosynthesis Active Radiation)
• Economical (long half-life, high μmol production, low energy consumption)
• Easy lamp replacement

Specifications:

• Light output (lights per 100 hours) 32000lm
• Lumens per watt: 100lm/W
• Estimated life (hour per 10 hours / start) 15000h
• Color temperature (K): 3100K
• Color rendering index (CRI) or (Ra) > 95
• Typical reboot time (minutes) 6-8min
• Position: BU + 90º

The growth, fruiting, hardiness and even flowering time of plants are completely dependent on the light they receive. The quality and intensity of the light as well as the duration of illumination are extremely important! Building the right lighting system would guarantee you excellent results. Combination lamps emit both red and blue light, making them a suitable light source for both the flowering phase and and for the growth phase.

High-quality turbine fan with plastic body of the well-known company CAN.

It is equipped with a built-in thermal protection switch that turns off the motor when it reaches a high temperature.   The Swiss-made motor along with the propeller design allows this type of fan to deliver strong airflow while creating less noise.

Application Combiconnect (Combined Flexible Duct) product is suitable for the Heating and Ventilation Market and industrial purposes, such as for the exhaust of welding fumes.

Because of an interior of aluminium the temperature range is up to 140°C and the outside layer gives a mechanical strong product. Construction The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encapsulated high tensile steel wire helix and covered with a mechanical resistant PVC (Poly Vinyl Chlorid) layer. Advantages: Combination of mechanical strength and high temperature.

Temperature range -30°C / +140 °C Maximum air speed 30m/sec. Maximum pressure 3000 Pa. Supplied in standard 10 metre length, individually boxed. Easy to install over either round or oval ducting. No special tools required for cutting or fixing.

Cable with a plug for connecting devices to the power supply.Cable length: 1.5m

Here are the most important components needed to build the ideal ventilation system for your needs.

Metal clamps are used to attach and seal a hose onto a fan or filter ducting. These metal clamps are made from high-quality stainless steel for durability and long service life. Screw metal clamps are convenient to install or remove by using a screwdriver to release or tighten. These well-designed screw clamps are very useful and provide great clamping force. Widely used for connecting air hoses, water pipes, fuel hoses, silicone hoses, etc.

The clamp is placed over the end of the hose or tube to be connected and when each ear is closed at the base of the ear with a special pincer tool, it permanently deforms, pulling the band, and causing the band to tighten around the hose.