Search

T-Micro CO2 Controller 

The T-Micro CO2 Controller is the smallest CO2 controller from the TechGrow range. This device is by far the best in its category, due to the complete digital technique.

You can use the T-Micro CO2 Controller in any room. It automatically turns the CO2 source on and off. The external CO2 sensor with light sensor enables automatic switching between day and night settings.

The T-Micro CO2 Controller is adjustable from 300 to 2000 ppm and performs a measurement every second. Its display shows actual values, including setpoint and hysteresis, and the indicator LED indicates whether CO2 is being dosed or not. Moreover, the T-Micro CO2 Controller has a built-in calibration function, so you can calibrate the CO2 sensor in fresh air.

This CO2 controller comes without a sensor.

Features:

- Plug & Play.

- Can be used in small to very large spaces.

- Built-in calibration function to calibrate the CO2 sensor in fresh air.

- Adjustable from 300 - 2000 ppm.

- Min/Max display for CO2.

- Indicator led indicates when CO2 is dosed.

- Switches the CO2 source (CO2 generator, CO2 cylinder) ON/OFF by means of a 230V relay.

- Memory for setpoint and hysteresis in case of power failure.

- Automatic 110V/230V detection.

- The external sensor has a light sensor that automatically switches between day and night settings.

- Automatic detection of cable failure or poor connection with the sensor(s).

- Sensor connection with standard network cable (UTP). Included is a cable of 5 meters.

- Controller and sensor are available separately.

- Various sensors are available separately.

- Possibility to connect the TechGrow Datalogger (DL-1).

Fertilization has never been easier than with the basic Dutch Formula line.

The unique formula allow for easy use by beginner growers and flexible dosing for the more experienced. Thanks to high concentrations of Dutch Formula fertilizers, you are also saving your money.

- Grow -  A component with the highest proportion of nitrogen, necessary for fast and strong growth of the plants

- Bloom - High proportion of phosphorus guarantees rapid development of the flowers

- Micro - Contains all the other elements required for the healthy development of the plants, all in perfect proportion

By mixing the mineral components of Dutch Formula with water, you will get a rich and balanced nutrition for your plants. The Dutch Formula is suitable for all kinds of growing media. Comprehensive dosage information can be found on this page. Find your local retail dealer

1000W ballast for lighting HPS and MH lamps

High quality 1000 w ballast in Class II. Made in Italy, robust and completely safe, which complies with European legal regulations and tested in accordance with: EN61347-1-2-9, EN60923, EN55015 among others. Very simple connection through the scheme shown. The lamp can be connected at a maximum distance of 16 meters.

• Power (W): 1000
• Output Voltage (V): 230
• Amperage: 10.3А
• Dimensions (mm): 213x176x360

Suspension strips for controlling insect repellent

Strips with wide range of activity on a number of insects such as black flies, whitefly, aphids and more. Ideal for use in greenhouses and indoor gardens! The strips have a special odorless, pesticide-free adhesive and are also suitable for the capture of cicadas on the rhododendron grown outdoors.

The package contains 7 strips.

7,5 x 20 cm

You'll never have to worry about your pH again! Advanced Nutrients pH Perfect Grow (1-1-6) balances your pH automatically. It contains patented "smart" ions that are released and are part of pH Perfect Technology, which automatically adjust and balance your pH to optimal levels.

400v Double ended 1000w HPS lamps are more efficient than standard HPS lamps, turning more of your electricity into light.

A 400v 1000w light costs exactly the same to run as the 230v system but the 400v HPS lamps produce up to 10% more light in comparison. Even noticeable to the human eye when placed side by side.

• High Quality lamp with improved output

• Effective for 12 months

• Utilizes 400v technology on a 230 volt domestic mains supply

• Produces more light than traditional 1000w lamps

• Runs cooler than standard 230v

• Increased yields compared to standard HPS

• Delivers a broader spectrum of plant usable light - PAR

• Suitable replacement lamp for Gavita Pro 1000w

Spreader Mat is mainly used for lining your N.F.T system.

It is used as a base for your rockwool cubes to sit on enabling your roots to grow into the matting and create a nice think mattress of roots, it will also help to distribute your nutrient solution evenly across your tray.

Also great for other methods of growing.

The Plant!T 780L Flexitank is a revolutionary water storage tank.

PLANT!T flexible tank is quick and easy to assemble. This practical tank can be used for hydroponic systems, for garden water storage and for rainwater harvesting. Unlike rigid tanks, it can be easily stored when not in use.

CANNA FLUSH is a product for cleaning substrates and plants from excess nutrients.

This is necessary because excess nutrients can negatively affect the next growth cycle. They could lead to over-fertilization or deficiency, for example .

CANNA FLUSH effectively cleans the substrate without killing beneficial bacteria or fungi, as can be the case when using reverse osmosis or demineralized water.

Canna Calmag agent - concentrate for buffering soft or RO water.

Designed to increase the EC of soft water. If you live in a soft water area or use RO water, this product is great for “hardening” your water to support healthy plant growth. Using Canna Calmag Agent helps you manage your nutrient solution by balancing EC levels to an optimal level creating the perfect environment for plant growth, with high nutrient uptake rates.

High-quality turbine fan with plastic body of the well-known company CAN.

It is equipped with a built-in thermal protection switch that turns off the motor when it reaches a high temperature.   The Swiss-made motor along with the propeller design allows this type of fan to deliver strong airflow while creating less noise.

Swelling blocks for seeds and cuttings

Convenient and safe substrate for seed germination and rooting of cuttings (clones). When watered, they swell and are ready for use. The a-blocks are reinforced with a biodegradable paper shell that keeps them intact while roots can easily grow through it.

Instructions:

Fill a tray with 2 and a half centimeters of water. The pellets will absorb all of the moisture and expand to their full height of about 2.3-4 centimeters. It can take the pellets 30 to 60 minutes to fully absorb water, and in drier conditions, they may require more water to fully hydrate. If there is excess water left in the tray, pour it out before planting the seeds.

The handy Dosing Capsule holder for your key chain, the Capsule Caddy is perfect on-the-go and holds up to four Dosing Capsules.

The Capsule Caddy is odor proof and waterproof!

• 1 pc. Capsule Caddy
• 4 pcs. Dosing Capsule
• 4 pcs. Liquid Pad for Dosing Capsules

The handy Dosing Capsule holder for your key chain, the Capsule Caddy is perfect on-the-go and holds up to four Dosing Capsules.

The Capsule Caddy is odor proof and waterproof!

• 1 pc. Capsule Caddy
• 4 pcs. Dosing Capsule
• 4 pcs. Liquid Pad for Dosing Capsules

Complete grow feed purposely designed for soil.

Complete grow feed purposely designed for soil. Our auto flower formulations are specially designed for auto flowering plants. This product has all of the essential macro- and micro growth nutrients necessary that is needed for exuberant growth. The high-quality components will completely be absorbed and leave no residu behind.

During the grow phase a plant is at its most vulnerable. Fungi- and bacteria related diseases are a real threat to the underdeveloped roots and leaves. To help a plant develop during the grow phase a right mix of potassium, nitrogen and phospor is needed to support maximum growth rate. This will make and keep the plant vital and strong throughout the grow phase.

Auto flowering plants grow in constant light and should not require any changes to the set up to start the flowering process. Original Grow Soil/Aarde Auto Flower A B is a perfectly mixed two component nutrient, that contains potassium, nitrogen and phospor to stimulate maximum growth and prevent diseases. Original Grow Soil/Aarde Auto Flower A B is also optimized to reach EC-levels of 1,5 – 1,8 (it is possible to deviate) to get an even better result!

Robust bucket of HDPE (polyethylene) suitable for Deep Water Culture, Flood and Drain hydroponic or other methods.

Equipped with two hose spout 4mm.diameter 33 cm, height 37cm.Lid NOT included!

You can see a Lid for the bucket here

Take Root is a root and growth stimulator capable of radically improving the internal and external qualities of young plants.

The active ingredients are of natural origin, including plant hormones and trace elements. During the first few weeks, the plant is most vulnerable to diseases associated with fungi and bacteria. Often, because young plants are deficient in minerals, hormones and vitamins.

Take Root contains several plant hormones and trace elements that enhance cell division, cell elongation, and nutrient transport, which aid in overall root development during early vegetative growth. The high-quality components will be fully absorbed and leave no residue behind.

This bloom enhancer, consisting of several trace elements, vitamins and acids, gives the plant explosive blooms.

Explode also improves the photosynthetic process and increases your plant's resistance to fungal and bacterial diseases. The high-quality components will be completely absorbed and leave no residue behind.

Explode ensures that a plant will receive all the nutrients it needs to explosively stimulate flowering. It increases the plant's resistance to other diseases associated with fungi and bacteria. Explode also stimulates the production of green pigment and the amount of chlorophyll in the leaves. This improves the photosynthetic process. Chlorophyll converts water and nutrients into glucose . This causes light, carbon dioxide and water and nutrients to be transformed into even more glucose, so that your flower and fruit increase explosively in weight and taste.

Basic fertilizer for flowering plants in hydroponics or coco (hard water)

This product has all the essential nutrients (macro and micro elements) needed for lush flowering. The high-quality components will be fully absorbed and will not leave residues in the plants. Plants take up essential elements from air and light, but also from nutrients in the soil. The roots and leaves of the plant are the main components for taking up these elements.

During the flowering phase, the plant is preparing for pollination. Photoreceptor proteins inside the plant tell it when to bloom. Hydro / Coco Bloom A + B is a perfectly blended two-component nutrient that contains potassium, nitrogen and phosphate to promote maximum growth and prevent disease.

The Wilma 8 hydroponic system is a lightweight, user-friendly and easy-to-carry hydroponic system for eight plants.

It also controls pests in the aerial part since, due to its systemic properties, Proneem is absorbed by the root and distributed by vascular tissues.

DOSAGE:

1. Application in irrigation water:

1 g PRONEEM® / liter of water.
2. Mixed in the substrate:

2-4 g PRONEEM® / liter of soil.
3. Foliar Application:

4-5 g PRONEEM® / per liter of water.

Basic, two-component fertilizer for cultivation.

A unique fertilizer for your plants. Suitable for use in peat-based substrates, as well as in inert substrates such as mineral wool and expanded clay. Specially designed for the growth phase of plants. The Osmosis version is recommended for gardeners who use reverse osmosis or rainwater filters.

AQUAKING Q5503 SUBMERSIBLE PUMP 11000L/H

The AquaKing Submersible Pump Q5503 is equipped with a side connection where you can directly connect a hose of 20/25 mm. The pump has a capacity of up to 11.000 liters per hour.

A submersible pump is made to pump away large amounts of water. You can use the pump in case of flooding or when emptying rain barrels, swimming pools, ponds or wells. As the name suggests, the pump is "immersed" in water when used. When purchasing a submersible pump, pay attention to maximum suction depth. This is the maximum depth at which the pump can do its job. Are you going to pump away dirty water or water with solid particles? Check that the pump is suitable for dirty water.

In short, the Aquaking submersible pump with side connection is a reliable, useful pump for pumping away (dirty) water.

Specifications

• 550 watt engine power 230 V/50 Hz;
• Hose 25/30 mm and 1" male thread;
• Capacity Max. 11,000 liters per hour;
• Max. 8.5 mlc (0.85 atm pressure);
• Max. 5 mm drainage;
• 10 meter rubber power cable H05 RNF. 3 x 0.75 mm.

Air-sock filler inlet air in the room to grow.

Reduces noise, prevents the entry of dust and pests in plants' enviroment and evenly distributes fresh air into the room. After harvesting each crop Air-Sock can be washed and used new.

features:

- Prevents the rapid spread of cold air around the plants

- Distributes fresh air evenly

- Prevents the entry of pests

- Ensure increased crop thanks to the improved climate

- Diameter 254

- 5 m length

Humidifier Valve Float

• Suitable for humidifier HR15
• Suitable for humidifier HR50
• With connection for 3cm hose

This 2-liter sprayer features a fully removable top section allowing solutions to be mixed inside the sprayer without the need for a separate mixing container.

Produces a fine, constant mist suitable for thoroughly covering lots of plants in a small area - also great for drenching both the top and bottom of leaves when spraying to eradicate spider mites.

Highly recommended.

Cross connector 16mm to 6mm

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but it is made of a different grade of aluminum.

Includes Heat shield Spreader.
The Tomax has the same benefits as the original, including an impressively low-hanging position over your plants and balanced light distribution. Economical double parabolic reflector. Control "hot spots" by attaching a "Heat shield Spreader".

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but it is made of a different grade of aluminum.

Includes Heat shield Spreader.
The Tomax has the same benefits as the original AdjustAWings, including an impressively low-hanging position over your plants and balanced light distribution. Economical double parabolic reflector. Control "hot spots" by attaching a "Heat shield Spreader"

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

*Lamp is not included in the set.

Master controller are able to control the lights to simulate sun rise and sunset.

You can customize the operating time as you want. It provides the excellent care for your indoor growing environment

- 2 MODES:  master controller has "follow mode" and "inverse mode". Follow mode requires to put only one sensors close to rooms' climate control system so that both sensors are exposed to the same temperature. Inverse mode requires to use both sensors in different room, so 2 sensors will execute inverse action, you can choose to control the lights in which room.

-CLEAR INTERFACE: master controller contains multiple functions with simple button control. Clear digital screen can accuratly indicate your settings, status and controller menu.

-SAFETY CONTROL master controller is designed with 2 quality sensors for checking temperature in all time.You can set your desired temperature so that it will automatically dim the lights when the temperature reach a specific level and turn off the lights if it reaches another temperature. "Main" and "aux" jacks each can be connected up to 80 ballasts (160 as total).

Guanokalong Palm Tree Ashes is a completely natural and organic product coming from the island of Sumatra, Indonesia.

High in potassium, phosphorus and magnesium. Together with it acts as an organic flowering stimulator. With a very high potassium content (NPK 0-1-30), this fertilizer is usually used together with Guanokalong Bat Guano to obtain a powerful organic stimulator combined with remarkable, final results. In addition to its potassium content, it also contains phosphorus and magnesium, which ensure the production of resinous buds.

A mix of organic humic and fulvic acids, Fulvic accelerates the absorption of nutrients into plant roots through a natural process called mineral chelation.

An exclusive extract of fulvic and humic acids, Fulvic is a combination of unique Leonardite sources, providing the highest diversity of bioactive, plant-based compounds that support plant growth.

Humic acids help move immobile and molecularly heavy minerals and transport them into plant tissues for faster growth and higher yields. Fulvic is extracted from Leonardite with a high humic acid profile. It is pH buffered in the range for optimal plant growth. Can be used with all growing methods - soil, coco mixes and hydroponics.

Fulvic acid improves plant growth and yield.

The light is necessary for the development of the plants.

In fact, it is necessary a sufficient contribution of light in order to favor the photosynthesis and the closing of the plants. The supplement of light by means of lamps electrical workers is the method simpler and economic in order to bring the necessary light to the plants.

MW700 is a portable Lux meter designed to perform light measurements. It is supplied with a light sensor connected to the meter that measures from 0 to 50000 Lux. Average indoor lighting ranges from 100 to 1000 Lux and average outdoor sun lights about 50000 Lux. Lux is a unit that indicates the density of light that falls on a surface.

The MW700-WP is a portable Lux meter designed to perform light measurements. The instrument is supplied in a hard carrying case complete with a light sensor connected to the meter that measures from 0 to 50000 Lux. The light sensor is waterproof, suitable to verify the light intensity also at the bottom of your aquarium. The accuracy is ±6% of reading (full scale). The MW700-WP works with a 9V alkaline battery. Automatic shut-off after 10 minutes saves battery and extends Lux meter life.

6.3 x 4.2 mm hose for combination with all 6 mm AutoPot systems.

Compatible with AQUAvalve - 6 mm pipe and fittings.

• 6 mm pipe
• 1 meter

This meshy filter is a kind of precise equipment which can intercept the impurities in the water by net, remove the suspended matter and particulate matter, reduce the turbidity, purify the water quality, reduce the fouling, bacteria, algae and rust of the system, to achieve the purpose of purifying water quality and protecting the normal operation of other systems and equipment.

Specification:

• Screen filter dimensions: approx. 138 x 48 mm
• Material: Plastic + stainless steel mesh
• Color: Random
• Flow: 5 cubic meter/H
• Working pressure: 1-8 bar

This film below is designed to save the trouble of gardeners from spilled water.

This product is extremely robust and stretchy in order to protect the maximum number of different surfaces and alleviate gardeners. All films were produced in England and adhere to strict standards to ensure the highest quality.

width: 600cm

pH- BLOOM is used to reduce the pH value of the nutrient solution during the flowering period!

• In order to lower the pH in the feeding tank there is the pH- series
• There are different solutions available for the vegetative (growing) and generative (blooming) phases
• CANNA pH+
• In order to adjust the pH upwards there is CANNA pH+
• This product is suitable for both the growth and the flowering phase
• CANNA has two different solutions of CANNA pH+
• One of 5 % for small adjustments and one of 20% for larger corrections

• Stir well before every measurement
• Add pH adjuster in very small doses (5ml) to the nutrient tank, checking the value of the pH level until desired pH level is achieved (6.2)

Concentrate against leaf fungus and diseases - Do your plants suffer from steroid dew or are your roses rusted?

Then this concentrate is ideal. The pesticide works against diseases in ornamental plants and must be repeated 2 to 3 times. After a while you will have a beautiful garden full of flowering plants again!

 
Protect Garden: the new name of Bayer Garden garden products
The popular Bayer Garden brand has undergone a name change and will continue from 2019 with its garden products as Protect Garden. The same trusted quality, but with a different look.

 
Easily get rid of leaf diseases
This plant care against leaf diseases and fungi is ideal for taking care of all your garden plants. The spray helps your plants from ster dew, mildew and rose rust and can also be used with box fungi. The product is good for 12.5 liters of liquid. Always read the instructions and the label carefully before use.

 
How do you use Rosacur as a plant care product?
As soon as you see that your plants are affected, it is advisable to use this product. For this, mix the indicated amount with water in a pressure syringe. You must then repeat the treatment 2 to 3 times with 7 or 14 days in between each time. For fast growing plants where leaf disease is advanced, you must repeat the treatment after 7 days. For slow-growing plants where the disease is not yet very serious, you can repeat the treatment after 14 days. Do not repeat the treatment more than 3 times.
 

Properties:

• Plant care against leaf diseases and fungi
• Ideal for roses
• Contains 50 milliliters of product, which is good for 12.5 liters of liquid
• Active substance: Tebuconazole 45.9 g / l
• Approval number: 12728 N
• Keep out of reach of children and pets
• Not suitable for human and animal consumption

Agroperlite retains moisture. It is used when growing flowers , vegetables and transplanting trees and bushes.

• Example application scheme for potted plants: mix 1 part agro perlite with 2 parts soil enriched with fertilizer.
• Example application scheme for seedling production: mix 2 parts agro perlite , 2 parts soil and 1 part peat.

Agroperlite retains moisture. It is used when growing flowers , vegetables and transplanting trees and bushes.

The silencer has the function to reduce noise levels in the ventilation system.

Install it following the way of exhaust air (after the fan).

Diameter and length: Ø150mm / L=1000mm

Metal support table for trays for plant cultivation. Does not include tray.

• material: metal
• Dimensions (m): 1.2x1.2, 1x1, 1x1.1, 1x2

VDL Cultivation tray 110x100 with opening, with drainage channels

If you intend to use sprayers to water your plants, you must provide holes from which the excess nutrient solution will escape, these holes can be made at the bottom of your pots, plates or cubes.

Cultivation trays have deep, curved drainage troughs that help drain nutrient solutions away from your plants, so the plant won't be constantly in water. Each tray also includes drainage channels.

VDL Cultivation tray 110x100 without opening, with drainage channels

If you intend to use sprayers to water your plants, you must provide holes from which the excess nutrient solution will escape, these holes can be made at the bottom of your pots, plates or cubes.

Cultivation trays have deep, curved drainage troughs that help drain nutrient solutions away from your plants, so the plant won't be constantly in water. Each tray also includes drainage channels.

The Danish Base Tray is purpose made for use with drip irrigation systems.

Plants are grown in pots or rockwool slabs placed on to the Danish Base Trays and fed from above with a dripper system. The trays are predrilled with a drain hole at the front allowing them to be used with various different types of drain fittings depending on the number of trays used and how they are laid out. Multiple trays can be joined together so waste water/nutrient flows to one common drain point such as a Right Angled Water Tank.

For a single tray fit a Drain Cover in the top side of the tray and a Green Screw Thread for Danish Base Trays on the underside of the tray. This provides a connection for a length of standard hose pipe which can run to a drain point such as a Right Angled Water Tank (see related items). For multiple trays, fit Drain Covers in the tops of the trays and PE Drain Elbow's and PE Drain T's underneath. Link multiple trays together using Black LDPE Supply Tube 25mm and then to a drain point such as a Right Angled Water Tank (see related items).

With this controller, your grow room will be constantly under control and the airflow will be temperature dependent.

Smart controller sensor

• length: 3m
• amperage: 6.5A