Products
Watermaster ph probe refill & storage 300ml (KCL) - liquid for maintenance and storage of ph Tester
Keep your probe clean!
Water Master Electrode Storage Solution (300 ml) is a storage solution for probes and Ph testers.
After the measurement is completed, the device should be rinsed with distilled water and stored. This can be done in the electrode cover or in a bottle, in either case keep the electrode moist with a storage solution which can be KCl 3.5M based or in buffer 4.
Watermaster ph probe cleaner 300ml
Cleaning Solution for pH Electrodes (HCL), 300 ml
Bluelab ph & conductivity probe care
Bluelab EC and PH Tester Cleaning and Maintenance Kit
Accurate readings simplify crop management and ensure crop improvement . Cleaning and properly storing the probe ensures that you get the most accurate readings possible and increases its life. The surface of the probe is where the instrument reads a solution or soil measurement . If the probe body is dirty , readings may be inaccurate.
Tip: If the EC tester reads a lower conductivity than the actual one, the probe needs cleaning. pH probes specifically, must be kept moist at all times for optimal performance and life.
The set contains:
- calibration solution pH 4.0 20ml x 2 pcs
- calibration solution pH 7.0 20ml x 2 pcs
- calibration solution pH 2.77 20ml x 2 pcs
- solution for storing pH tester KCL 20ml x 2 pcs
- solution for cleaning the EU probe 30 ml x 1 pc
- pH probe cleaning solution 30ml x 1 pc
- cleaning equipment