Grow room reflectors

Within this range we recommend two options, the Shiny reflector and the Basic Hammered reflectors, with ventilation grids to evacuate the heat. Let’s see their main features in detail:

Hammered Reflector: One of the best basic reflectors that we can find. Its textured finish and open design get good light distribution. It includes hooks for hanging and a built-in E40 bulb-holder (with ground wire) compatible with CFL, HPS and HM bulbs (250, 400, 600 and 1000W). An affordable option. Its dimensions are 190 x 430 x 470 mm.

Shiny reflector: It’s also compatible with 250, 400, 600 and 1000W HPS and HM bulbs ( E40 bulb-socket), as well as CFL lights without any need of using adapters. A very good basic reflector with the advantage of a durable design.

Adjust-a-Wings reflectors:

Without a doubt, the Adjust-a-Wings reflectors with double parabola have earned great reputation in the cannabis sector during the past few years on its own merit, especially for its spectacular design and features. It distributes the light much more uniformly than basic reflectors. In addition it also has an available Super-Spreader, a device that is attached to the base of the bulb holder and helps distributing the light and dissipating the heat produced by the bulb. There are three different versions of the Adjust-a-Wings, all of them for HPS and HM bulbs (250, 400, 600 and 1000W) or also CFL lights:

Adjust-a-Wings Enforcer: This is the simplest model. Its reflection rate is 86%, for a minimum of three years of constant use. Like the other versions, the shape and design of the Adjust-a-Wings Enforcer allow you to open or close its wings depending on the area to be covered.

Adjust-a-Wings Defender: With a reflection rate similar to the Enforcer, the Adjust-a-Wings Defender‘s surface is made of an ally of H18 aluminum and magnesium (3%), which makes it more resistant, of industrial range. The light reflection is more diffuse and uniform than that of the Enforcer.

Adjust-a-Wings Avenger: The top model of the range, made from a super reflective material (97%) with molten glass and titanium dioxide, with ceramic coating. It will retain its properties for 20 years.

Cooltube reflectors:

If you need to lower the temperature of the grow room/tent a few degrees, then air-cooled reflectors like the Cooltube reflector are doubtless an excellent choice. The tubular shape of this type of reflector allows you to connect them to the air extraction fan, which will efficiently extract the heat emitted by the bulb.

These reflectors are made of glass with high resistance to hot temperatures, and includes a small reflector with wings (made of Miro9, a material with a reflection rate of 97 %) for better light reflection. It’s compatible with HPS and HM bulbs (250, 400 and 600W) and is available in two diameters: 125 and 150 mm (the 150 mm Cooltube also admits 1000W bulbs). Installing it in vertical position is also possible for those growing systems that may require it.

For more useful information, check out our other BLOG articles. The GrowshopMania team wishes you successful cultivation!