Metal Halide Lamps (MH)

The color emitted by these lamps is very distributed throughout the spectrum.

It contains some colors of the spectrum that are not found in mercury lamps, so halogenides are more suitable for the growth of plants, emitting a blue / white light. Within the halide lamps used in indoor gardening, the most used are the SUNMASTER due to the development, branching, dry weight, production, etc. that is achieved with them. 600W bulb.

• Wattage: 600W
• Mains Voltage (V): 400V
• Rated Hours: 6000
• CCT (K): 4500 K
• Luminous Flux (lm): 50 000
• Bulb Screw: E40

Metal-halide lamp for the growing season

Fine-tuned to provide optimal spectral energy levels that promote vigorous plant growth. Optimized spectrometal halide grow lights provide high initial and sustained high output lumens with optimal spectral energy required for proper, vegetative growth. Optimized Metal Halide Grow Lamps are designed for growing high quality, natural looking plants.

• Power: 400W
• CRI: 80
• Voltage: 110V / 277V ;
• Color temperature: 6500K
• 32,000 lumens
• Glass type: T46

The growth, fruiting, hardiness and even flowering time of plants are completely dependent on the light they receive. The quality and intensity of the light as well as the duration of illumination are extremely important! Building the right lighting system would guarantee you excellent results. (MH) scatter light in the blue spectrum and this makes them ideal for vegetative growth, throughout the phase.

Metal-halide lamp for the growing season

Fine-tuned to provide optimal spectral energy levels that promote vigorous plant growth. Optimized spectrometal halide grow lights provide high initial and sustained high output lumens with optimal spectral energy required for proper, vegetative growth. The optimized Metal Halide Grow Lamps are designed for growing high quality, natural looking plants.

• Power: 600W
• CRI: 60
• Voltage: 110V / 277V ;
• Color temperature: 4200K
• 60000 lumens
• Glass type: T46

The growth, fruiting, hardiness and even flowering time of plants are completely dependent on the light they receive. The quality and intensity of the light, as well as the duration of illumination, are extremely important. Building the right lighting system would guarantee you excellent results. (MH) scatter light in the blue spectrum and this makes them ideal for vegetative growth, throughout the phase.

This Optimized Spectrum Metal Halide Grow Lamp allows you to stretch your growing season to 365 days a year.

Fine-tune your lighting system to provide optimum spectral energy levels that promote vigorous plant growth. Optimized Spectrum Metal Halide Grow Lamps provide high initial and maintained lumen output with optimum spectral energy required for vegetative growth. Optimized Spectrum Metal Halide Grow Lamps are designed to grow high quality, natural looking plants.

• Lamp Power 1000W
•  CRI 60
• 110V/277V;
• 4,200K
• 60,000 lumens
• Glass Type T46

Metal halides have the more balanced spectrum.

The light they give out has a significant amount of light from the bluer end of the spectrum, which the plant uses to grow vegetatively. It produces plants with a small internodal length, with large leaves and thick stems. It produces the most natural looking plants. It simulates the light from the beginning of the year and is good for plants before they're switched into flowering mode.

They're normally slightly more expensive than HPS. Recently, there have been 'enhanced spectrum' MH bulbs produced which also give off a significant amount of red light. Conversion bulbs are also available which plug into HPS ballasts which are actually MH bulbs. Useful for changing the light balance without changing the ballasts also. In the event of a power failure, they need about 20 minutes before restating.

They may restart earlier but it shortens the life of the bulb quite dramatically to try and start a hot bulb.

• Power Plant HIT/HBU/LU Metal Halide Lamp - 250 watt.
• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.250w hps = 23,000 lumens

Metal halides have the more balanced spectrum.

The light they give out has a significant amount of light from the bluer end of the spectrum, which the plant uses to grow vegetatively. It produces plants with a small internodal length, with large leaves and thick stems. It produces the most natural looking plants. It simulates the light from the beginning of the year and is good for plants before they're switched into flowering mode.

They're normally slightly more expensive than HPS. Recently, there have been 'enhanced spectrum' MH bulbs produced which also give off a significant amount of red light. Conversion bulbs are also available which plug into HPS ballasts which are actually MH bulbs. Useful for changing the light balance without changing the ballasts also. In the event of a power failure, they need about 20 minutes before restating. They may restart earlier but it shortens the life of the bulb quite dramatically to try and start a hot bulb.

• Power Plant HIT/HBU/LU Metal Halide Lamp - 1000 watt.
• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.400w hps = 38,000 lumens

Power Plant HIT/HBU/LU Metal Halide Lamp - 600 watt.

• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.

We recommend that lamps are replaced every 12 to 14 months, after 14 months there is an appreciable drop in the lumen output leading to a reduction in crop yield 


600w hps = 51,000 lumens
 

Power Plant HIT/HBU/LU Metal Halide Lamp - 1000 watt.

• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.

We recommend that lamps are replaced every 12 to 14 months, after 14 months there is an appreciable drop in the lumen output leading to a reduction in crop yield 


1000w hps = 100,000 lumens

Sunmaster develops and manufactures the highest output hydroponic lighting systems available.

Venture Lighting, Sunmaster's parent company, is an industry leader in delivering high-output HID lamp and ballast systems with higher efficacy (lumens/watt or PAR/watt) values.

Technical data:

• Watts: 400 
• Lamp Description: M.400W.U37.CDX
• Ballast Type: MH 
• Initial Lumens: 30,000 
• Life Hours: 15,000 
• Op. Position: Universal

Sunmaster Finishing Deluxe Lamps​​​​​​​

Improves aromas and flavours. Helps ripen fruit and increases oil production.For use in the last 10 days of flowering.
​​​​​Sunmaster Finishing Deluxe lamps are the best in the violet-blue end of the spectrum and give off the perfect light for the final stages in the growth cycle.

Ultraviolet radiation is quite important in biological photochemical reactions as well as in the elimination of certain mildews.  Engineered in Ohio and utilizing specialty chemicals optimized in Illinois, Sunmaster’s FINISH product family delivers the perfect light spectrum for the final stage of a plants’ growth cycle.Partner with Sunmaster ‘COOL’ and ‘SUPER’ to maximize yield.

• Initial Lumens (Lumens @ 100 hours) 50000
• PAR Watts 174
• Rated Life (Hrs. @10Hr. /Start) 10000
• Correlated Colour Temperature K 10000
• Chromaticity (CIE - X,Y) 338 351
• Colour Rendering Index (CRI) 65
• Typical Warm Up Time (Minutes) 3-5
• Typical Hot Restart Time (Minutes) 5-10
• Burning Position Universal

Benefits

• Strong UV violet-blue component for the final stage in the plant growth cycle
• Improves aroma and flavors
• Long life and high output 10K
• Features
• Exclusive Venture Lighting lamp chemistry
• Strong output, weighted in the blue/violet/UV end of the spectrum
• E-ballast compatible

SolisTek metal-halogen (pulsed) digital lamps 10K - "The Finisher"

10K Metal Halide is a light pulse light for the last 7 to 14 days of flowering for better ripening and finishing. Low-E glass is used in the manufacture to increase UV penetration in your plants and higher quality.

The low-iron glass consists of clean materials free of pollutants, making the glass more clear. Typically, the glass has a green tint as a result of impurities, probably from recycled materials. It has been proven that the low-impurity glass allows more UV light to pass.
Why Digital Lighting? The sun is high frequency. In order to make artificial light, which behaves like natural sunlight, it must be high frequency. Digital light contributes to higher light quality.

SolisTek High Frequency MH offers:

- Comprehensive, balanced color spectrum
- Less damping of PAR and lumen output over time.
- Precision combinations of gases to increase blue, red and ultraviolet rays
- High-frequency technology and UV balance
- Improved HID design for extended lamp life
- Designed for commercial applications
- Guarantee for quality, consistency and profitability

Specifications for metal halide (hot restart: 10-15 minutes):

• Watts: 600W
• Lumenes: 58,000lm
• Color: 6 000
• CRI: 65
• ANSI: S106 / E

 
SolisTek contains an enhanced UV spectrum.