Parabolic reflector for HPS & MH - Size: medium (diameter 89 cm)

• Aluminum on both sides
• Includes mounting hardware
• Reflector includes mounting bracket and lamp socket. The lamp can be installed vertically or horizontally
• The exclusive adjustable bracket allows the user to raise or lower the lamp inside the reflector

Feature:

• Innovative design: can be installed vertically or horizontally
• Easy to install
• Made of high quality aluminum
• It comes with a built-in UL-certified socket and a 4.5m power cord
• A lamp is not included in the set

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but it is made of a different grade of aluminum.

Includes Heat shield Spreader.
The Tomax has the same benefits as the original AdjustAWings, including an impressively low-hanging position over your plants and balanced light distribution. Economical double parabolic reflector. Control "hot spots" by attaching a "Heat shield Spreader"

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

*Lamp is not included in the set.

The shape of this reflector gives the same uniform light distribution and reflection as the famous AdjustaWings model, but it is made of a different grade of aluminum.

Includes Heat shield Spreader.
The Tomax has the same benefits as the original, including an impressively low-hanging position over your plants and balanced light distribution. Economical double parabolic reflector. Control "hot spots" by attaching a "Heat shield Spreader".

• Twice as powerful and efficient as most other reflectors on the world market
• Increases grow area per lamp by up to 75%
• Increases lamp performance by up to 50%. Reduces heat and saves energy

Tomax with reflectors for double-ended lamps, offer powerful light.

Contents:

• 3-mode adjustable reflector
• ballast 1150W
• Full-spectrum LAMP

Adjust A Wing Socket 

Cleaning cloth for lamps and reflectors

All light bulbs must be wiped of fingerprints after installation. This microfiber cloth is perfect for that. Removes fingerprints and dust from lamps, glass, light fixtures, etc. Size: 40x40cm.

GSE Timer Box IV for switching several inductive loads such as high pressure steam lamps with high inrush current to turn ON and OFF simultaneously.

Technical specifications:
Body: WxHxD= 200x255x95mm
Timer box: WxHxD= 230x300x110mm
1 pole 1x10A 2'300W
Voltage: 230V / 50Hz
Protection class: IP54

Features:

- 1 pc. 24-hour timer
- Green dimmable display
- Designed for inductive loads
- 0-10V or PWM output
- Temperature display
- Temperature monitoring during emergency stop
- Blackout
- Sunrise/Sunset - Day counter
- Time format - 0-24h or 12 AM/PM
- Temperature format °C or °F
- Starting heating when the light is off

A CONTROL UNIT FOR INDOOR GROWING CAN MANAGE UP TO 6X600W LAMPS

The Advanced GSE Control Unit for grow box manage the indoor lighting of plants, is a professional timer & contactor system for turning on 6 x 600w lights.

FEATURES OF THIS CONTROL UNIT FOR GROW ROOM:

• This system will turn on 6 x 600w lights in groups of 2 with a 25 second delay between each group. 
• The benefit of this is that you do not have a large start up power surge by turning all the lights on at once. 
• This model includes a heating socket which turns on when lights are off (power management)

Digital timer Cornwall Electronics

Schedule the turning on or off of any electrical device at home during your absence, with the convenience of digital control and simplified configuration.

- 8 preset ON/OFF programs
- MANUAL OFF/AUTO/MANUAL ON position makes it easier to access programs
- Ability to choose between 12- and 24-hour mode
- The SUMMERTIME function is useful for zones with changing time zones
- Random function allows programs to be started with a delay of 0 to 32 minutes 16 programmable combinations for individual days or groups of days - - Voltage: 220-240V AC 50Hz
- Maximum load: 16A, 3600W
- Minimum time: 1 minute

Analog timer for automatic control of household appliances, heating systems, lighting.

Turns on and off the connected equipment (lamp, pump, water tank heater). Can be programmed at intervals.

Voltage regulator dimmer

Features:

- voltage:230V

- Speed controller with 1.6 A internal fuse.

- range: from 0 to 280W

- frequency - 50 Hz

Gavita Master controller EL2

Maximum control, ease of use, safety and easy installation. Simply connect the controller cables to your module using the included T-splitter, set the modules to EXT (external control), connect the module and controller to the mains and you are ready to use your lighting system.

The controller can turn on and off all modules connected to it (Model EL2 can control two separate rooms with up to 40 ballasts in each, or just one with up to 80 ballasts), can adjust the desired level of light emitted by the modules (percentage or as absolute value) and even mimics sunrise and sunset, by gradually starting and stopping the lamps when they are turned on and off.

Gavita Master controller EL1

 
Lighting control at your fingertips!

Using a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram), set the dials on the fixtures to EXT (External control), plug the controller and the fixtures directly into mains and you are set to go.

The controller can switch all the interconnected fixtures on and off with its internal timer, adjust them to your required output level (in percentage or exact output power) and even simulate sunrise and sunset to gradually adjust the climate in your grow room when your lights go on or off. This electronic controller replaces expensive lighting timers and contactors while preventing ballast current in-rush when switching on your lights.

Two very important features are the autodim function and emergency shut-down. When the temperature in your grow room rises beyond the control level of your climate control your crop can be damaged beyond recovery. The temperature probe senses this and will automatically dim the lights to not overshoot your safe temperature, and maintain it. The display and warning LED indicate when this happens, and also indicate if this has happened while you were away so you can correct the problem. If for any reason your climate control completely fails and the temperature rises to unacceptable levels the system will perform an emergency shutdown of all connected equipment. The alarm contact of the controller can be connected to your alarm system for instant notification.

You can connect all your e-series fixtures to one controller.
 

The Rope Ratchet 8 provides a convenient way to hang lighting and ventilation equipment in your grow room.

The attachment mechanism is easy and includes a quick release lever.

Features:

• thick, polypropylene ropes
• tightly and tightly woven ropes
• polished steel hooks
• durable plastic housing
• Rope length 2.43m
• 68kg maximum load

The Rope Ratchet provides a convenient way to hang lighting and ventilation fixtures in your grow room.

The attachment mechanism is easy, reliable and includes a quick release lever.

Features:

• thick, polypropylene ropes
• tightly and tightly braided ropes
• polished steel hooks
• durable plastic housing
• Rope length 2m
• 68kg maximum load

Easy Roller is a handy tool to hang your lights.

The advantage of the Eas y Roller is that you can easily hang your lamps/reflectors at a certain height. They are designed for a maximum weight of 5 kg. This is enough for most lamps.

• Set of 2
• 5 kilos max weight
• With a cord of one meter

Cable with a plug for connecting devices to the power supply.Cable length: 1.5m

two cables, each with a thickness of 2x0.75mm

• 1.5m with a plug, for connecting to the network
• 2.5m to connect the choke to the lamp

Cable with connector (male) for ballasts.Suitable for binding and extension of the connection.

Galaxy PRO 640W UVFR LED – Professional UV/IR LED Lighting

Galaxy UVFR LED is a highly efficient lighting system designed for the full life cycle of plants in professional conditions – from vegetative growth to the flowering phase with high light requirements.

Thanks to the adjustable spectrum and specially selected LED chips, including infrared (IR) and ultraviolet (UV) , the system allows adaptation to the needs of plants at every stage. The glass coating of each module amplifies the light emission and increases the intensity to the plant canopy, which ensures maximum PPFD in CO₂ enrichment cultivations.

With a variety of mounting options, Galaxy UVFR LED can be used for vertical systems, rack structures and grove tables , providing uniform and precise illumination at all levels.

Suitable for producers seeking maximum yield, higher quality and energy optimization.

i-Clone LED tubes – full spectrum lighting for growth and flowering

i-Clone LED tubes are compact and highly efficient lighting fixtures made of a sturdy aluminum and plastic alloy that completely eliminate the need for classic lamps and fluorescent tubes. The highly transparent protective cover with IP65 protection protects the LEDs and electronics from moisture and dust.

Available in two sizes – 60 cm and 120 cm , they are specially designed for the growth and flowering phases , allowing for an extended photoperiod and stable plant development. They are an excellent choice for cloning, seedlings and maintaining mother plants .

i-Clone LED provides optimal light intensity for plants, cuttings, seedlings, vegetables and fruits, complementing periods of lower natural light without emitting excess heat that would stress the plants. This results in faster and better quality results.

Thanks to the 180° light distribution , even coverage is achieved in both small spaces and larger installations. Each LED tube is equipped with mounting brackets and IP68 input/output connectors , allowing serial connection of up to 6 LED tubes to one power source.

Features:

• Full spectrum LED light – suitable for growth and flowering

• Color temperature: 6500 K

• High efficiency up to 2.4 μmol/J

• Lighting angle: 180°

• Luminous flux: 39.6 μmol

• Consumption: 18W per strip

• Possibility to connect up to 100 pipes

• Built-in controller – easy to install and carry

• Passive cooling – no fans or moving parts

• Waterproof housing and connectors ( IP65/IP68 )

• Possibility of chain connection

• Easy installation – hanging clip and pigtail attachment slot

• Suitable for vertical farming, shelves, tables and indoor cultivation