The RP circulation pump is one of the most commonly used circulation pumps.

RP circulation pump models are fully submersible and suitable for many applications. These pumps are extremely reliable. They meet international standards, and their compact size allows them to be easily installed, even in smaller spaces.

Circulators are 13mm and 20mm hose connections and are connected to a variable flow regulator. These circulation pumps are easy to maintain and are supplied with a 1.5 meter cable.

Pumps RP 400 L / h have a capacity of 400 liters per hour.

The RP circulation pump is one of the most commonly used circulation pumps.

RP circulation pump models are fully submersible and suitable for many applications. These pumps are extremely reliable. They meet international standards, and their compact size allows them to be easily installed, even in smaller spaces.

Circulators are 13mm and 20mm hose connections and are connected to a variable flow regulator. These circulation pumps are easy to maintain and are supplied with a 1.5 meter cable.

These circulation pumps are easy to maintain and are supplied with a 1.5 meter cable.

Manufactured with high quality plastic materials inside a sealed structure, its engine manufactured completely watertight and cooled by oil, which has a filter inside to avoid obstructions in the operating mechanism, it consists of a thermostat that stops the engine in case of overheating.

You must always have it in the water for proper use and never deeper than 2mt. You should not work with it in temperatures above 35º

Depending on the flow or the dimensions of the hose that we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you are going to use an irrigation lance it is recommended at least 2000l / h for a bit of water flow, with 3000l / h you will get a normal pressure and with 4000l / h you will get the ideal pressure for the lance. 

If its use is going to be used for drip irrigation, a minimum of 1000l / h is recommended for each square meter of crop.

Specifications:

• Depth max: 2 mt
• 10mt power cable.
• Power: 18 W
• Maximum height: 1.3 mt
• Flow rate: 800 L / H
• Voltage / Frequency: 220-240v / 50hz

It is made of high-quality plastic materials in a closed structure, whose engine is completely waterproof and oil-cooled, which has a filter inside to avoid obstacles in the working mechanism.
It consists of a thermostat that stops the engine in case of overheating. You should always immerse it in the water for proper use and never more than 2 meters a. You should not work with it at temperatures above 35º.
Depending on the flow or the dimensions of the hose we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you want to use an irrigation pipe, at least 2000l / h is recommended for a small flow of water, at 3000l / h you will get normal pressure and at 4000l / h you will get ideal pressure. If you are going to use the pump for drip irrigation, a minimum of 1000 l/h is recommended for each square meter of crop.

It is made of high-quality plastic materials in a closed structure, whose engine is completely waterproof and oil-cooled, which has a filter inside to avoid obstacles in the working mechanism.
It consists of a thermostat that stops the engine in case of overheating. You should always immerse it in the water for proper use and never more than 2 meters a. You should not work with it at temperatures above 35º.
Depending on the flow or the dimensions of the hose we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you want to use an irrigation pipe, at least 2000l / h is recommended for a small flow of water, at 3000l / h you will get normal pressure and at 4000l / h you will get ideal pressure. If you are going to use the pump for drip irrigation, a minimum of 1000 l/h is recommended for each square meter of crop.

It is made of high-quality plastic materials in a closed structure, whose engine is completely waterproof and oil-cooled, which has a filter inside to avoid obstacles in the working mechanism.
It consists of a thermostat that stops the engine in case of overheating. You should always immerse it in the water for proper use and never more than 2 meters a. You should not work with it at temperatures above 35º.
Depending on the flow or the dimensions of the hose we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you want to use an irrigation pipe, at least 2000l / h is recommended for a small flow of water, at 3000l / h you will get normal pressure and at 4000l / h you will get ideal pressure. If you are going to use the pump for drip irrigation, a minimum of 1000 l/h is recommended for each square meter of crop.

Specifications NHA7000 :

Wave Maker 3000 - stirring pump 6W 3000 l./h.

The Wave Maker 3000 is a pump designed to stir the nutrient solution in the tank. It protects the water in the tank from stagnation and therefore the loss of oxygen. The more water circulates, the more it will be enriched with oxygen. The device has a hinged ball joint that allows it to rotate 360°.

Wave Maker 6000 - stirring pump 12W 6000 l./h.

The Wave Maker 6000 is a pump designed to stir the nutrient solution in the tank. It protects the water in the tank from stagnation and therefore the loss of oxygen. The more water circulates, the more it will be enriched with oxygen. The device has a hinged ball joint that allows it to rotate 360°.

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 5W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 400 l/h
• Max Hight: 0.8 m

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 8W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 600 l/h
• Max Hight: 1 m

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 16W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 800 l/h
• Max Hight: 1.30 m

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 22W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 1000 l/h
• Max Hight: 1.60 m

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 28W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 1400 l/h
• Max Hight: 2.00 m

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters. Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump. Saltwater/ Fertilizer resistant.

• Power: 48W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 1800 l/h
• Max Hight: 2.30 m

BOYU FP-1000 Adjustable Pump 1000L/hr

The BOYU Liquid pumps are submersible and suitable for all hydroponc systems and nutrient solution pumping requirements. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated. Disassembly and cleaning is easy thanks to the clever design.

• Max H - 1.8m
• Power - 16w
• Outlet - 15mm (3/4") 
• 1000LPH

BOYU FP-1500 Adjustable Pump 1500L/hr

The BOYU Liquid pumps are submersible and suitable for all hydroponc systems and nutrient solution pumping requirements. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated. Disassembly and cleaning is easy thanks to the clever design.

• Max H - 2.5m
• Power - 25w
• Outlet - 12.7mm (1/2") 
• 1500LPH

BOYU FP-1500 Adjustable Pump 1500L/hr

The BOYU Liquid pumps are submersible and suitable for all hydroponc systems and nutrient solution pumping requirements. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated. Disassembly and cleaning is easy thanks to the clever design.

• Max H - 3m
• Power - 43w
• Outlet - 19mm (3/4") 
• 2000LPH

BOYU FP-1000 Adjustable Pump 3000L/hr

The BOYU Liquid pumps are submersible and suitable for all hydroponc systems and nutrient solution pumping requirements. The shaft is non-corrosive and all line parts are sealed, waterproof and insulated. Disassembly and cleaning is easy thanks to the clever design.

• Max H - 3.5m
• Power - 68w
• Outlet - 19mm (3/4") 
• 3000LPH

AQUAKING Q5503 SUBMERSIBLE PUMP 11000L/H

The AquaKing Submersible Pump Q5503 is equipped with a side connection where you can directly connect a hose of 20/25 mm. The pump has a capacity of up to 11.000 liters per hour.

A submersible pump is made to pump away large amounts of water. You can use the pump in case of flooding or when emptying rain barrels, swimming pools, ponds or wells. As the name suggests, the pump is "immersed" in water when used. When purchasing a submersible pump, pay attention to maximum suction depth. This is the maximum depth at which the pump can do its job. Are you going to pump away dirty water or water with solid particles? Check that the pump is suitable for dirty water.

In short, the Aquaking submersible pump with side connection is a reliable, useful pump for pumping away (dirty) water.

Specifications

• 550 watt engine power 230 V/50 Hz;
• Hose 25/30 mm and 1" male thread;
• Capacity Max. 11,000 liters per hour;
• Max. 8.5 mlc (0.85 atm pressure);
• Max. 5 mm drainage;
• 10 meter rubber power cable H05 RNF. 3 x 0.75 mm.

Garden Itools water drain pump 8000l / h

Ideal for pumping rainwater or swimming pool water. The power is 400W with a capacity of up to 8000 liters / hour. The pump reaches a height of 5 meters and a depth of 7 meters. It has a cable with a length of 10 meters.

Features:

Power: 400W

Power supply: 230V

Capacity: 8000 l / h

Maximum height: 5m

Maximum depth: 7m

The pump has a 10m power cable.

Water pump for installation in or outside the tank.

High quality ABS plastic housing. Ceramic anti-corrosion shaft, resistant to any solutions. It is suitable for high-pressure systems.

It is suitable for tanks around 80L and drip systems.

• Flow rate: 800L/h
• Height of water column: 1.0m
• Power: 8W
• Input voltage: 220-240V 50Hz
• Outlet diameter: 12mm
• designed for long-term use
• dual water-cooling design for quick heat dissipation
• applicable to all hydroponics needs - pumping, aeration, NFT, filtration
• suction cups for secure attachment in the tank

Metal coupler for air and water with 4 conclusion.

Equipped with foot for adjusting the flow of each output.

Plastic coupler for air and water with 16 outputs

Plastic coupler for air and water with 26 outputs

High quality Air Diffuser to increase the oxygen content of all nutrient solutions.

Simply attach to an Air Pump with Silicone Air Line (sold separately). Recommended for all systems!

High quality Air Diffuser to increase the oxygen content of all nutrient solutions.

Simply attach to an Air Pump with Silicone Air Line (sold separately). Recommended for all systems!

High quality Air Diffuser to increase the oxygen content of all nutrient solutions.

Simply attach to an Air Pump with Silicone Air Line (sold separately). Recommended for all systems!

Volume-air Round Ceramic Airstone 150mm (6")

Air stones - ideal for aerating nutrient solutions High quality Air Diffuser to increase the oxygen content of all nutrient solutions. Simply attach to an Air Pump with Silicone Air Line ( sold separately). Recommended for all systems! Please Note: Black rubber pressure band in Image is not Included Air stones - ideal for aerating nutrient solutions

Volume-air Round Ceramic Airstone 150mm (6") Air stones - ideal for aerating nutrient solutions High quality Air Diffuser to increase the oxygen content of all nutrient solutions.

Simply attach to an Air Pump with Silicone Air Line ( sold separately). Recommended for all systems! Please Note: Black rubber pressure band in Image is not Included Air stones - ideal for aerating nutrient solutions

Volume-air Round Ceramic Airstone 150mm (6") Air stones - ideal for aerating nutrient solutions High quality Air Diffuser to increase the oxygen content of all nutrient solutions.

Simply attach to an Air Pump with Silicone Air Line ( sold separately). Recommended for all systems! Please Note: Black rubber pressure band in Image is not Included Air stones - ideal for aerating nutrient solutions

Volume-air Round Ceramic Airstone 150mm (6") Air stones - ideal for aerating nutrient solutions

High quality Air Diffuser to increase the oxygen content of all nutrient solutions. Simply attach to an Air Pump with Silicone Air Line ( sold separately). Recommended for all systems! Please Note: Black rubber pressure band in Image is not Included Air stones - ideal for aerating nutrient solutions

Volume-air Round Ceramic Airstone 150mm (6") Air stones - ideal for aerating nutrient solutions High quality Air Diffuser to increase the oxygen content of all nutrient solutions.

Simply attach to an Air Pump with Silicone Air Line ( sold separately). Recommended for all systems! Please Note: Black rubber pressure band in Image is not Included Air stones - ideal for aerating nutrient solutions

Volume-air Round Ceramic Airstone 150mm (6") Air stones - ideal for aerating nutrient solutions

High quality Air Diffuser to increase the oxygen content of all nutrient solutions. Simply attach to an Air Pump with Silicone Air Line ( sold separately). Recommended for all systems! Please Note: Black rubber pressure band in Image is not Included Air stones - ideal for aerating nutrient solutions

It contains a special artificial rubber to keep production and air pressure constant over time.

Its structure is small and compact, having a long life with a minimum energy consumption.It has a 6-outlet air distributor.

Features:

- Flow rate: 20L / min, 1200L / h
- Pressure:> 0.015Mpa
- Power: 18W
- Input voltage: 220-240V 50Hz
- Output diameter: 6mm
- Noise: <55dB

It contains a special artificial rubber to keep production and air pressure constant over time.

Its structure is small and compact, having a long life with a minimum energy consumption.It has a 8-outlet air distributor.

Features:

- Flow rate: 40L / min, 2400L / h
- Pressure:> 0.015Mpa
- Power: 18W
- Input voltage: 220-240V 50Hz
- Output diameter: 6mm
- Noise: <55dB

It contains a special artificial rubber to keep production and air pressure constant over time.

Its structure is small and compact, having a long life with a minimum energy consumption.It has a 8-outlet air distributor.

Features:

- Flow rate: 60L / min, 3600L / h
- Pressure:> 0.015Mpa
- Power: 48W
- Input voltage: 220-240V 50Hz
- Output diameter: 6mm
- Noise: <55dB

It contains a special artificial rubber to keep production and air pressure constant over time.

Its structure is small and compact, having a long life with a minimum energy consumption.It has a 16-outlet air distributor.

Features:

- Flow rate: 150L / min, 9000L / h
- Pressure:> 0.015Mpa
- Power: 108W
- Input voltage: 220-240V 50Hz
- Output diameter: 6mm
- Noise: <55dB

It contains a special artificial rubber to keep production and air pressure constant over time.

Its structure is small and compact, having a long life with a minimum energy consumption. It has a 20-outlet air distributor.

Features:

- Flow rate: 300L / min, 18000L / h
- Pressure:> 0.015Mpa
- Power: 202W
- Input voltage: 220-240V 50Hz
- Output diameter: 6mm
- Noise: <55dB

The product adopts electric magnetic motor, and the air is produced by piston in the way of straight-line and reciprocal motion, and it has more reasonable structure.

The product adopts electric magnetic motor, and the air is produced by piston in the way of straight-line and reciprocal motion, and it has more reasonable structure. 

Super silent air pump High quality silencer High efficiency low power consumption built for extended use.

This pump produces an air flow of up to 1.5 liters per minute, while being very quiet. Great for saturation with oxygen in your tank, aqua-park, hydroponic system.

Features:

- Flow rate: 1.5L / min
- Pressure:> 0.012Mpa
- Power: 1W
- Input voltage: 220-240V 50Hz
- Output diameter: 4mm
- Noise: <40dB

Air pumps and compressors find many applications. They are suitable for connecting to aeration stones to saturate the working solution with oxygen, for aquariums and more.

Super silent air pump High quality silencer High efficiency low power consumption built for extended use.

This pump produces an air flow of up to 2.5 liters per minute, while being very quiet. Great for saturation with oxygen in your tank, aqua-park, hydroponic system.

Features:

- Flow rate: 2.5L / min
- Pressure:> 0.012Mpa
- Power: 2W
- Input voltage: 220-240V 50Hz
- Output diameter: 4mm
- Noise: <40dB

Air pumps and compressors find many applications. They are suitable for connecting to aeration stones to saturate the working solution with oxygen, for aquariums and more.

Super silent air pump High quality silencer High efficiency low power consumption built for extended use.

This pump produces an air flow of up to 4.5 liters per minute, while being very quiet. Great for saturation with oxygen in your tank, aqua-park, hydroponic system.

Features:

- Flow rate: 4.5Lx4/min
- Pressure:> 0.013MPa
- Power: 8.5W
- Input voltage: 220V/50Hz
- Output diameter: 4mm

Air pumps and compressors find many applications. They are suitable for connecting to aeration stones to saturate the working solution with oxygen, for aquariums and more.

The Aquaking AK2-10 air pump is a professional air pump for industrial and medical applications.

The Aquaking AK2-10 air pump is a professional air pump for industrial and medical applications. The Aquaking air pumps from the AK2-10 / 20/30/40 Series are of top quality. The design of the air pumps is simple but sound. The pumps are characterized by high efficiency, produce virtually no noise and are very compact.

Benefits

- Very durable, lasts a long time;
- Excellent heat dissipation;
- Very quiet;
- Large airflow;
- No lubrication required.

Specifications:

- Aluminum interior for the engine; 
- Consumption: 10 Watt;
- Voltage: 230Volt;
- Pressure: 0.02 MPa;
- Capacity: 600 liters per hour;
- Dimensions: L x W x H = 187 x 107 x 114 mm.

The Aquaking AK2-20 air pump is a professional air pump for industrial and medical applications.

The Aquaking AK2-20 air pump is a professional air pump for industrial and medical applications. The Aquaking air pumps from the AK2-10 / 20/30/40 Series are of top quality. The design of the air pumps is simple but sound. The pumps are characterized by high efficiency, produce virtually no noise and are very compact.

Benefits:

- Very durable, lasts a long time;
- Excellent heat dissipation;
- Very quiet;
- Large airflow;
- No lubrication required.

Specifications:

- Aluminum interior for the engine; 
- Consumption: 15 Watt;
- Voltage: 230Volt;
- Pressure: 0.02 MPa;
- Capacity: 1200 liters per hour;
- Dimensions: L x W x H = 224 x 139 x 114 mm.

The Aquaking AK2-30 air pump is a professional air pump for industrial and medical applications.

The Aquaking AK2-30 air pump is a professional air pump for industrial and medical applications. The Aquaking air pumps from the AK2-10 / 20/30/40 Series are of top quality. The design of the air pumps is simple but sound. The pumps are characterized by high efficiency, produce virtually no noise and are very compact.

Benefits:

- Very durable, lasts a long time;
- Excellent heat dissipation;
- Very quiet;
- Large airflow;
- No lubrication required.

Specifications:

- Aluminum interior for the engine; 
- Consumption: 25 Watt;
- Voltage: 230Volt;
- Pressure: 0.02 MPa;
- Capacity: 1800 liters per hour;
- Dimensions: L x W x H = 275 x 167 x 176 mm.

The Aquaking AK2-40 air pump is a professional air pump for industrial and medical applications.

The Aquaking AK2-40 air pump is a professional air pump for industrial and medical applications. The Aquaking air pumps from the AK2-10 / 20/30/40 Series are of top quality. The design of the air pumps is simple but sound. The pumps are characterized by high efficiency, produce virtually no noise and are very compact.

Benefits:

- Very durable, lasts a long time;
- Excellent heat dissipation;
- Very quiet;
- Large airflow;
- No lubrication required.

Specifications:

- Aluminum interior for the engine; 
- Consumption: 30 Watt;
- Voltage: 230Volt;
- Pressure: 0.02 MPa;
- Capacity: 2400 liters per hour;
 

This pump produces an air flow of up to 3.8 liters per minute while at the same time it is very quiet.

Great for saturation with oxygen in your tank, aqua-park, hydroponic system.

Features:
 
- Flow rate: 3.8L / min
- Pressure:> 0.012Mpa
- Power: 2.5W
- Input voltage: 220-240V 50Hz
- Output diameter: 4mm
- Noise: <40dB