Search

EC buffer solution 20 ml 1.413

- solution EC  1,413 for the calibration of electronic meters EC

-content: 20ml

- calibration table on the packaging

EC buffer solution 20 ml 12880 µS/cm 

- solution EC 12880 µS/cm for the calibration of electronic meters EC-

- content: 20ml

- calibration-table on the packaging

High quality solutions formulated for calibrating and/or testing conductivity probes.

Bluelab® conductivity standard solutions are essential for use with all Bluelab® products.
 
Bluelab® Solutions are manufactured specifically for Bluelab® products and are referenced to high laboratory standards to ensure your Bluelab® products last longer and maintain accuracy.

High quality solutions formulated for calibrating and/or testing conductivity probes.

Bluelab® conductivity standard solutions are essential for use with all Bluelab® products.
 
Bluelab® Solutions are manufactured specifically for Bluelab® products and are referenced to high laboratory standards to ensure your Bluelab® products last longer and maintain accuracy.

solution EC 2.77 μS / cm for calibration of electronic EC-testers

calibration - according to the scheme on the packaging

Each meter is in need of maintenance, service and technical inspection, even if it is not broken. This process is called Calibration. Properly calibrated increases productivity, ensures consistency, comparability and compatibility with testers.

PH buffer solution  4,01 20 ml

- pH-4.01 buffer solution for calibration of electronic pH meters

- content: 20ml

- calibration-table on the packaging

 20 ml pH 7.01

 

-liquid pH 7.01 to calibrate electronic pH meters

-content: 20ml

- calibration-table on the packaging

pH measuring equipment should be regularly cleaned and calibrated so that the user can be sure that the readings are accurate. The pH testers are calibrated using pH7.0 (buffer) and pH4.0 (bias) solutions before each measurement. Calibration solutions should be stored in cool places away from direct sunlight and heat.

When to calibrate your pH pen or probe:

• Before first use
• If the calibration reminder has disappeared from the LCD screen (30 days after the first calibration)
• If the pH reading is different than expected
• After cleansing and hydration
• After changing the batteries

To calibrate your pH pen or probe, follow the steps below:

1. Make sure your pen or probe is clean and hydrated.
2. Turn on the pH pen or probe. Press the power/hold button.
3. First calibrate to pH 7. Place the probe tip in fresh Bluelab pH 7.0 calibration solution. Wait for the reading to stabilize between pH 6.6 - pH 7.5. Long press the Cal button on the pen or meter until "CAL" is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once "0000" stops flashing, the sequence is complete and "pH7" is displayed.
4. Rinse. Rinse the tip of the pen or probe thoroughly in clean tap water and shake off any excess.
5. Calibrate to pH 4. Place the probe tip in fresh Bluelab pH 4.0 calibration solution. Wait for the reading to stabilize between 3.6 pH - 4.5 pH . Long press the Cal button until “CAL” is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once “0000” stops flashing, the sequence is complete and “pH4” is displayed.
6. Confirm the calibration. A calibration confirmation will appear at the bottom of the pen or probe screen to indicate a successful calibration. It will disappear after 30 days to indicate that a new calibration is required.

pH measuring equipment should be regularly cleaned and calibrated so that the user can be sure that the readings are accurate. The pH testers are calibrated using pH7.0 (buffer) and pH4.0 (bias) solutions before each measurement. Calibration solutions should be stored in cool places away from direct sunlight and heat.

When to calibrate your pH pen or probe:

• Before first use
• If the calibration reminder has disappeared from the LCD screen (30 days after the first calibration)
• If the pH reading is different than expected
• After cleansing and hydration
• After changing the batteries

To calibrate your pH pen or probe, follow the steps below:

1. Make sure your pen or probe is clean and hydrated.
2. Turn on the pH pen or probe. Press the power/hold button.
3. First calibrate to pH 7. Place the probe tip in fresh Bluelab pH 7.0 calibration solution. Wait for the reading to stabilize between pH 6.6 - pH 7.5. Long press the Cal button on the pen or meter until "CAL" is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once "0000" stops flashing, the sequence is complete and "pH7" is displayed.
4. Rinse. Rinse the tip of the pen or probe thoroughly in clean tap water and shake off any excess.
5. Calibrate to pH 4. Place the probe tip in fresh Bluelab pH 4.0 calibration solution. Wait for the reading to stabilize between 3.6 pH - 4.5 pH . Long press the Cal button until “CAL” is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once “0000” stops flashing, the sequence is complete and “pH4” is displayed.
6. Confirm the calibration. A calibration confirmation will appear at the bottom of the pen or probe screen to indicate a successful calibration. It will disappear after 30 days to indicate that a new calibration is required.

Maintaining a pH meter is essential for taking accurate readings and keeping your nutrient solution within the correct pH range.

Essentials buffer pH 4 ensures accurate calibration of your pH meter.

• Use regularly to keep your pH meter calibrated
• Helps ensure accurate readings
• Can be used with any brand of pH meter

Every meter needs maintenance, service and technical inspection, even if it is not broken. This process is called Calibration. Done correctly, calibration increases performance, ensures consistency, comparability and compatibility among testers.

Maintaining a pH meter is essential for taking accurate readings and keeping your nutrient solution within the correct pH range.

• Use regularly to keep your pH meter calibrated
• Helps ensure accurate readings
• Can be used with any brand of pH meter

Buffer Solution pH 4.01 - 100ml solution for calibrating ph meters.

- pH 4.00 ± 0.01 / 25 ° C.

Keep your probe clean!

Water Master Electrode Storage Solution (300 ml) is a storage solution for probes and Ph testers.

After the measurement is completed, the device should be rinsed with distilled water and stored. This can be done in the electrode cover or in a bottle, in either case keep the electrode moist with a storage solution which can be KCl 3.5M based or in buffer 4.

Cleaning Solution for pH Electrodes (HCL), 300 ml

pH measuring equipment should be regularly cleaned and calibrated so that the user can be sure that the readings are accurate. The pH testers are calibrated using pH7.0 (buffer) and pH4.0 (bias) solutions before each measurement. Calibration solutions should be stored in cool places away from direct sunlight and heat.

When to calibrate your pH pen or probe:

• Before first use
• If the calibration reminder has disappeared from the LCD screen (30 days after the first calibration)
• If the pH reading is different than expected
• After cleansing and hydration
• After changing the batteries

To calibrate your pH pen or probe, follow the steps below:

1. Make sure your pen or probe is clean and hydrated.
2. Turn on the pH pen or probe. Press the power/hold button.
3. First calibrate to pH 7. Place the probe tip in fresh Bluelab pH 7.0 calibration solution. Wait for the reading to stabilize between pH 6.6 - pH 7.5. Long press the Cal button on the pen or meter until "CAL" is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once "0000" stops flashing, the sequence is complete and "pH7" is displayed.
4. Rinse. Rinse the tip of the pen or probe thoroughly in clean tap water and shake off any excess.
5. Calibrate to pH 4. Place the probe tip in fresh Bluelab pH 4.0 calibration solution. Wait for the reading to stabilize between 3.6 pH - 4.5 pH . Long press the Cal button until “CAL” is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once “0000” stops flashing, the sequence is complete and “pH4” is displayed.
6. Confirm the calibration. A calibration confirmation will appear at the bottom of the pen or probe screen to indicate a successful calibration. It will disappear after 30 days to indicate that a new calibration is required.

pH measuring equipment should be regularly cleaned and calibrated so that the user can be sure that the readings are accurate. The pH testers are calibrated using pH7.0 (buffer) and pH4.0 (bias) solutions before each measurement. Calibration solutions should be stored in cool places away from direct sunlight and heat.

When to calibrate your pH pen or probe:

• Before first use
• If the calibration reminder has disappeared from the LCD screen (30 days after the first calibration)
• If the pH reading is different than expected
• After cleansing and hydration
• After changing the batteries

To calibrate your pH pen or probe, follow the steps below:

1. Make sure your pen or probe is clean and hydrated.
2. Turn on the pH pen or probe. Press the power/hold button.
3. First calibrate to pH 7. Place the probe tip in fresh Bluelab pH 7.0 calibration solution. Wait for the reading to stabilize between pH 6.6 - pH 7.5. Long press the Cal button on the pen or meter until "CAL" is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once "0000" stops flashing, the sequence is complete and "pH7" is displayed.
4. Rinse. Rinse the tip of the pen or probe thoroughly in clean tap water and shake off any excess.
5. Calibrate to pH 4. Place the probe tip in fresh Bluelab pH 4.0 calibration solution. Wait for the reading to stabilize between 3.6 pH - 4.5 pH . Long press the Cal button until “CAL” is displayed. Release button. A calibration sequence will begin with the display flashing "0" continuously. Once “0000” stops flashing, the sequence is complete and “pH4” is displayed.
6. Confirm the calibration. A calibration confirmation will appear at the bottom of the pen or probe screen to indicate a successful calibration. It will disappear after 30 days to indicate that a new calibration is required.

Cleaning Solution for pH Electrodes (HCL), 300 ml

It is important that the probe on your pH Meter does not dry out as this could damage the probe and give you incorrect pH readings.

The pH probe should be stored in KCL-PRO storage solution whenever it is not being used ! This will maximise accuracy and prolong the life of the electrode. It is as simple as adding a few drops to your pH Meter cap and closing it ! This liquid is ideal for storage of all pH probes. The probe should be topped up regularly to maintain correct levels. Not for refilling gel based electrodes.

It is important that the probe on your pH Meter does not dry out as this could damage the probe and give you incorrect pH readings.

The pH probe should be stored in KCL-PRO storage solution whenever it is not being used ! This will maximise accuracy and prolong the life of the electrode. It is as simple as adding a few drops to your pH Meter cap and closing it ! This liquid is ideal for storage of all pH probes. The probe should be topped up regularly to maintain correct levels. Not for refilling gel based electrodes.

The perfect solution to store and hydrate your Bluelab pH probes or pens.

Bluelab pH Probe KCl Storage Solution is made specifically for use with Bluelab® pH Probes and Pens. It is designed to increase response time and maximize the life of Bluelab® pH Probes and Pens.

Add KCl solution to the cap of the pH pen/probe for storage, after use and hydrate in KCl solution monthly. Instructions are on the label of the bottle.

Bluelab pH Probe KCl Storage Solution is manufactured to high laboratory standards.

Bluelab pH 7 Solution, 250 ml Sachet

Ensures That pH Meters Provide Accurate Readings

• Dependable and reliable calibration
• Essential for use with all Bluelab products
• Standard calibration solution
• Closely monitored for accuracy

Bluelab pH 7 Solution, 20 ml ensures that pH meters are giving accurate readings. Bluelab pH solutions are made for Bluelab products but pH calibration solutions are universal and can be used with other pH tester brands. Bluelab solutions are manufactured specifically for Bluelab products and are referenced to high laboratory standards to ensure your Bluelab products last longer and maintain accuracy.

The pH measuring equipment must be cleaned and calibrated regularly to ensure they are giving the user accurate readings. pH instruments are calibrated to pH7.0 first (buffer) then to pH4.0 (slope).Many of Bluelab's conductivity equipment does not need calibrating as they are factory calibrated here at Bluelab. 

Bluelab pH 4 Solution, 250 ml 

Ensures That pH Meters Provide Accurate Readings

• Dependable and reliable calibration
• Essential for use with all Bluelab products
• Standard calibration solution
• Closely monitored for accuracy

Bluelab pH 4 Solution, 20 ml ensures that pH meters are giving accurate readings. Bluelab pH solutions are made for Bluelab products but pH calibration solutions are universal and can be used with other pH tester brands. Bluelab solutions are manufactured specifically for Bluelab products and are referenced to high laboratory standards to ensure your Bluelab products last longer and maintain accuracy.

The pH measuring equipment must be cleaned and calibrated regularly to ensure they are giving the user accurate readings. pH instruments are calibrated to pH7.0 first (buffer) then to pH4.0 (slope).Many of Bluelab's conductivity equipment does not need calibrating as they are factory calibrated here at Bluelab. 

BlueLab kit for maintenance and cleaning of EC Tester

Kit Contents:

• Probe care instructions
• Two single-use sachets of 20 ml Bluelab 2.77 EC Conductivity Standard Solution
• One plastic cup
• Bluelab Conductivity Probe Cleaner
• Conductivity probe cleaning tool
• Build-up cleaning brush

pH measuring equipment should be regularly cleaned and calibrated so that the user can be sure that the readings are accurate. The pH testers are calibrated using pH7.0 (buffer) and pH4.0 (bias) solutions before each measurement. Calibration solutions should be stored in cool places away from direct sunlight and heat.

The set contains:

• 2 sachets x 20ml with calibration solution pH 7.0
• 2 sachets x 20ml with calibration solution pH 4.0
• 2 sachets x 20ml with KCl storage solution
• 3 plastic cups
• A tube of pH probe cleaning solution
• Brush (pH probe cleaning tool)

KCl , or potassium chloride, is a solution for storing and hydrating pH pens and probes
Bluelab pH Probe Storage Solution is a storage solution designed specifically for use with Bluelab pH Pens or Bluelab pH Probes.

The storage solution is used to ensure that the pH probe is maintained in ideal conditions during storage until the probe is not in use.

Typically, most storage solutions for pH probes contain a mixture of potassium chloride (KCl) and water. Some brands may contain small amounts of other ingredients. For this reason, we encourage the use of Bluelab pH Probe KCl storage solutions with all pH probes to avoid contamination from these other ingredients.

Bluelab KCl solution contains only pure KCl , which has the same mixing power as the gel that is in Bluelab pH probes.

For this reason, when you hydrate or store your pH probe in Bluelab KCl solution, it helps to revitalize the KCl reference solution that is in your pH probe. This is because some of the gel in your pH probe can wash away during use - if this happens in storage, however, it means that fresh new KCl solution (from your pH probe storage cap) will replace the solution that has been flushed out of the probe. This means that the probe is almost "revitalized" while stored in KCl solution.
With that in mind, if you store your pH probe in tap water or another solution, then during storage instead of the contaminated KCl being washed out and fresh KCl coming in, instead, your storage solution (either tap water or maybe a pH4 solution ) will go into your probe. This will exacerbate the contamination of the internal reference solution.

Ideally, using fresh KCl in storage ensures that the fresh KCl solution will also enter your pH probe, helping the probe instead of harming it.
Deionized, distilled, pure or RO (reverse osmosis) water should never be used to store or hydrate a pH probe or pen. Pure water will affect the chemical composition of your reference solution in your pH probe and this will cause premature failure of the probe or pen.

We recommend daily use of the pH probe storage solution - a fresh application once a week is recommended (a few drops in the probe storage cap at the end of each week should be sufficient).

Bluelab EU Tester Cleaning Kit

Clean the conductivity probe regularly to ensure accurate readings.

Regular care and maintenance of your Bluelab conductivity probes is important to ensure accurate readings. Salts and organic oils can build up on the probe, blocking the sensors, so if your EC or ppm readings seem off, vary, or you have an error message on your conductivity pen, your probe probably needs care and cleaning.

Check and clean your pen once a month for best results.

How to clean Bluelab conductivity (EC/PPM) probes.

1. Remove the cap
For the Bluelab Truncheon, rotate the cover 90 degrees and remove it.
For Bluelab conductivity probes, warm the cap in your hand for a few seconds to aid in removal. Hold the body and gently pull the cover.

2. Clean the probe face
Place 1 or 2 drops of Conductivity Probe Cleaner on the face of the probe. Rub firmly with Bluelab Chamois.

3. Rinse the face of the probe
Rinse off all traces of detergent under running tap water while scrubbing the surface of the probe with Bluelab Chamois.

4. Check that the water forms a thin layer
There should be no drops of water on the face of the probe. If there are droplets, repeat steps 2 and 3.

5. Replace the cap and test
Test in 2.77 EC standard conductivity solution to ensure cleaning is adequate. Place the probe in the solution and wait for the reading to stabilize to a constant value.

This may take several minutes for the probe to adjust to the temperature of the solution.

If the reading is not within 0.1EC/1CF of 2.8EC, repeat steps 2 through 4 until the test is within range.

Bluelab EC and PH Tester Cleaning and Maintenance Kit

Accurate readings simplify crop management and ensure crop improvement . Cleaning and properly storing the probe ensures that you get the most accurate readings possible and increases its life. The surface of the probe is where the instrument reads a solution or soil measurement . If the probe body is dirty , readings may be inaccurate.

Tip: If the EC tester reads a lower conductivity than the actual one, the probe needs cleaning. pH probes specifically, must be kept moist at all times for optimal performance and life.

The set contains:

1. calibration solution pH 4.0 20ml x 2 pcs
2. calibration solution pH 7.0 20ml x 2 pcs
3. calibration solution pH 2.77 20ml x 2 pcs
4. solution for storing pH tester KCL 20ml x 2 pcs
5. solution for cleaning the EU probe 30 ml x 1 pc
6. pH probe cleaning solution 30ml x 1 pc
7. cleaning equipment

Milwaukee C65 / C66 is a waterproof EC tester, specially designed for hydroponics and agricultural markets, with automatic temperature compensation and manual calibration with 1 point.

The EC tester has a range of 0.00 to 10.00 mS / cm as well as an optional electrode option and is supplied in a battery pack, calibration solution (M10031) and a calibration screwdriver. The modular design allows easy replacement of the electrode and batteries.

Specifications:

• range: from 00 to 10.00 mS / cm
• resolution: 0.01 mS / cm
• accuracy: ± 2%;
• Calibration: automatic, single point
• automatic temperature compensation with β = 2% / ° C
• Operating conditions: -5 to 50 ° C / 32 to 122 ° F ;, humidity up to 100%
• batteries: 3 x 1.5V (included)
• Battery life: approx. 250 hours of continuous use
• dimensions: 165 x 30 x 30 mm

CALIBRATION:

• Frequent calibration is recommended for maximum measurement accuracy.
• Immerse the tester electrode in a glass of tap water
• Immerse the probe in a suitable calibration solution: 1413 mS / cm.
• Open the top cover of the tester and, using the screwdriver included in the kit, turn until 1.41 appears on the display.