REDUCED TECHNOLOGY

Characteristics:

• Blue light display
• No calibration required
• EC, CF and ppm 500 and ppm 700 scales
• Fully waterproof
• Automatic on/off function

The minimum speed controller is a temperature dependent controller for ventilated rooms with one or more fans.

Dimensions and technical specification:
Body: WxHxD= 130x92x105mm
Controller: WxHxD = 160x130x105mm
Developed for: 10A / 2300W / Triac 2x16A
Voltage: 230V / 50HZ
Digital sensor 5V measures temperature from –55°C to +125°C (–67°F to +257°F)
0.5°C with accuracy from –10°C to +85°C
Protection class: IP54

Ozone is an active form of oxygen.

Ozone is known for having a strong oxidizing effect on substances of any type, therefore it is used to neutralize bacteria and viruses, odors and gases, microorganisms and pests. Removes even the strongest odors in large areas! The Cornwall ozonator has minimal energy consumption (18w). You will be able to get rid of problematic conditions in the room with the push of a button. Its maintenance is limited to occasional cleaning to keep dust from accumulating.

• Place your ozonator about 1.80m or 2m off the ground so it can work effectively, oxidizing every particle.
• There are two modes of operation

Eliminates:
- odors (e.g. mold, cigarettes, cat litter) and harmful gases (e.g. organic solvents);
- viruses, bacteria, microorganisms and spores of mold and fungi;
- prevents the spread of dust mites, pet irritants and cockroaches;
- completely sterilizes the environment in the room.

Ozone is an extremely active form of oxygen.

It has a strong oxidizing effect on all substances, therefore it is used to neutralize odors and gases, bacteria and viruses, microorganisms and pests. The Ozonator Cornwall is a device that effectively fights and destroys odors, vapors and spores! The device has a built-in timer for automatic on and off, easy to install and effective for spreading ozone in the room through a fan.

Eliminates:
- odors (e.g. mold, cigarettes, cat litter) and harmful gases (e.g. organic solvents);
- viruses, bacteria, microorganisms and spores of mold and fungi;
- prevents the spread of dust mites, pet irritants and cockroaches;
- completely sterilizes the environment in the room.

Garden shears

These scissors are equipped with springs so they open automatically, which greatly reduces hand fatigue , making these scissors great for people with arthritis, carpal tunnel. The Comfort Grip handles will make it easier for you to work for long periods of time without discomfort.

Ultra sharp blades:

These quality shears are made of stainless steel with precision sharpened blades and are ready to handle any type of vegetation.

Safe lock:

Equipped with microscopic seals for a safe and secure side closing mechanism. The design of these scissors is ideal for use whether you are right-handed or left-handed.

With these blades, you can easily reach between plants to cut just the area or part you want to cut with one hand and without damaging vital stems and branches.

Bud Clean Clippers, ideal for cuttings and pruning.

Electronic throttle with microprocessor control!

Lumatek digital ballasts offer the most advanced technology on the market for greenhouse lighting. Compact and completely silent, they have the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the lamp model used and its condition, as well as to the mains voltage.

WHAT ARE THE ADVANTAGES OF HIGHER LIGHT EMISSION?
More light with less energy consumption and hence, greater productivity on the same surface. By using a suitable reflector, the increased light can be distributed over a larger surface.

​

The Bluelab EC pen is the latest innovation in handheld EC meters and is the ultimate solution when it comes to EC measurement.

Measure pH, conductivity and temperature on the go. The Bluelab Combo Meter provides ultimate convenience by taking care of all three fundamentals of nutrient absorption simultaneously.

Not only that, but this multi-parameter meter and its probes feature a brilliantly simple design. The Bluelab pH probe is easy to use, clean and calibrate; when the time comes, it's also easy to replace. Similarly, the Bluelab Conductivity Probe has straightforward functionality that does not require additional calibration.
 

How to use the Bluelab EC pen:

• The conductivity pen comes with a battery and is ready to use out of the box.
• The pen is factory calibrated.
• Press the power button to turn on the Bluelab Conductivity Pen.
• To turn off the pen, press and hold the power button until OFF is displayed.
• The pen will automatically turn off after 4 minutes to conserve battery power.
• Place the probe tip into your nutrient solution and wait for the reading to stabilize.
• Rinse under running tap water after use.

Features:

• Measures pH and temperature
• Measures in °C and °F
• LCD display
• Fixed plug
• Indicator of successful pH calibration
• Function Hold Indication
• Low Bat
• Fully waterproof
• Automatic shut-off
• Automatic temperature compensation

This meter works very accurate and has a micro processor and automatic temperature compensation.

Dozer machine

Works with CO2 tablets . Place CO2 tablets in the slots in the machine and set the interval at which the machine releases them into your tank.

CO2 Boost with ingredients that are 100% all-natural and harmless

- Compact, small and lightweight

- No dangerous open flames!

- No CO2 emitters or generators to mess with

CO2 Boost works from a combination of all-natural compost ingredients.

The ingredients are mixed and placed in the bucket where the CO2 is then naturally created. The pump draws CO2 out of the bucket and released to your plants.

This product releases anywhere from 5000-15000 ppms if your CO2 monitor is placed DIRECTLY in front of the release valve. These levels decrease sufficiently once they are released into the ambient air. If your grow room is properly sealed, you can achieve optimum growing levels at 1200-1500ppms for sizes up to 10'x10'x10', if your growing area is larger than that we suggest multiple buckets.

CO2 Boost lasts at least 60 days if used constantly. If you coordinate our product with a timer to coincide with your lights on/lights off phase, it will last you 75-90 days. We suggest one bucket per growing cycle to be safe. The maximum shelf life of an open bucket is 90 days.

Even though it's a 100% organic product it is completely odorless. 

Each bucket comes with a small air hose that is attached to the pump. The best distribution method is to place this air hose directly over top of your plants to let the Co2 fall downwards onto the leaves and roots. This method is a nice way to dodge problems such as air leaks and ventilation. Inside your order you will find a pamphlet that includes a "set up and growing tips" section for more information.

CO2 Boost's ingredients are 100% all-natural and harmless. As a matter of fact once your bucket has expired you can open the bucket and use the remaining ingredients as high grade fertilizer!. The pump draws CO2 out of the bucket and released to your plants.