Lighting

Effective lighting in professional greenhouses!

Each 315 watts lamp produces light equivalent to 500-600 watts of traditional MH / HPS light. Since these lamps spend less than 350 watts of power, it means you can save up to 40% of your power bill while covering the same area. Most manufacturers that use CMH lighting get higher yields and a big leap in quality.

• Ceramic metal halide lamp for growth
• Spectral distribution optimized for photosynthesis efficiency
• Blue Spectrum for Healthy Plant Growth and Strength
• Ceramic μmol output within the PAR spectrum (Photosyntesis Active Radiation)
• Economically profitable (long average life, high PMI output, low energy consumption)
• Easy lamp change

Growth, fruit, endurance, and even the flowering time of plants are completely dependent on the light they get. The quality and intensity of light as well as the duration of illumination are extremely important! The construction of the appropriate lighting system will guarantee you excellent results. The combined lamps emit both red and blue light, making them a suitable light source for both the blooming phase and for the growth phase.

Effective lighting in professional greenhouses!

Each 315 watt lamp produces light equivalent to 500-600 watts of traditional MH / HPS light. As these lamps use less than 350 watts of power , this means you can save up to 40% on your power bill while covering the same area. Most growers who use CMH lighting get higher yields and a big jump in quality.

CMH lamps are very good at growth and flowering, especially those with a warmer color spectrum (around 3000K), but no better than HPS in the red spectrum area.

• Ceramic metal-halide grow lamp
• Spectral distribution optimized for photosynthetic efficiency
• Blue spectrum for abundant plant growth and strength, red spectrum for flowering.
• Ceramic μmol output within the PAR spectral region (Photosynthesis Active Radiation)
• Economical (long half-life, high μmol production, low energy consumption)
• Easy lamp replacement

Specifications:

• Light output (lights per 100 hours) 32000lm
• Lumens per watt: 100lm/W
• Estimated life (hour per 10 hours / start) 15000h
• Color temperature (K): 3100K
• Color rendering index (CRI) or (Ra) > 95
• Typical reboot time (minutes) 6-8min
• Position: BU + 90º

The growth, fruiting, hardiness and even flowering time of plants are completely dependent on the light they receive. The quality and intensity of the light as well as the duration of illumination are extremely important! Building the right lighting system would guarantee you excellent results. Combination lamps emit both red and blue light, making them a suitable light source for both the flowering phase and and for the growth phase.

The NewliteVision glasses are designed to get the best vision in your indoor marijuana cultivation, and for this reason they are made ​​of marterials of high quality and technology, that allow us to perceive the bright light of the bulb as if it was sunlight, without alter the color of our plants.

Their blue lenses have been specially designed to correct the orange colour resulting from the sodium light in your culture, giving us total freedom and comfort when working.

Moreover, they not only fulfill a purely practical function, but also they will protect our eyes from the rays of sodium lamps and from the splash of products or nutrient solutions used, increasing our security.

Features of Glasses Newlite Vision protection Standard HPS:

• Front support for lenses and temples.
• Blue lenses.
• Dark glasses, to be used with sunlight outdoors.
• Magnification, for a bit of expansion. Totally optional, will be located between our eye and the lens.
• Grip tape to increase the attachment to the head. Just remove the pins and replace them by the tape.
• Compact neoprene case with zipper.

The NewliteVision glasses are designed to get the best vision in your indoor marijuana cultivation, and for this reason they are made ​​of marterials of high quality and technology, that allow us to perceive the bright light of the bulb as if it was sunlight, without alter the color of our plants.

Their blue lenses have been specially designed to correct the orange colour resulting from the sodium light in your culture, giving us total freedom and comfort when working.

Moreover, they not only fulfill a purely practical function, but also they will protect our eyes from the rays of sodium lamps and from the splash of products or nutrient solutions used, increasing our security.

Available in two versions, Standard and Full Pack Equipe.

Features of Glasses Newlite Vision protection Standard HPS:

• Front support for lenses and temples.
• Blue lenses.
• Grip tape to increase the attachment to the head. Just remove the pins and replace them for the tape.
• Blister to save and protect your glasses.

A useful accessory , designed specifically to protect the eyes from excessive light and to neutralize the spectral shift caused by sodium lamps.

Because of the strength of the light and its specific spectrum, it is often difficult to notice the early symptoms of fertilizer deficiency or the appearance of parasites. These glasses filter orange light by converting the HPS-spectrum into a spectrum close to the eye's natural one. So you can observe the true colors of your plants - leaves, fruits and flowers.

Safety glasses are a necessary accessory for those times when you want to observe your plants in their light period without harming your eyes.

Protective case for growroom glasses

Thanks to the protective glasses, the growers can observe their plants indoors without the strong light hindering their eyes. Keeping this accessory is just as important! That durable case will help you when you do not use your glasses.

• black color
• length: 16cm

Higher efficiency - more light for your plants. Allows quick lighting of the bulb, saving energy. Quieter than any other throttle.

• 4 power modes 250/400/600/660 W
• Adjustable ballast for 600 W HID bulbs
• Unique design for more efficient cooling
• Protection class IP 54
• Up to 15% more lumen
• Silent

The ballasts regulate the voltage supplied to the selected lamp, to the working lamp and to ignite the lamp, creating a high-voltage pulse after the interruption of the starter current. They are divided into two types - electromagnetic and electronic ballast. The difference between the two is that the electronic ballast does not require a starter and is usually lighter and less heated. Other advantages are the quieter operation of the conventional throttle, the increase in lamp life by 30% - 50% and the reduced pulsations of light output.

Electronic ballasts alter the flow of light bulb current using a series of induction coils that are separated from each other. Unlike magnetic ballasts, they use an induction coil rather than a series of coils. The impulse delivered from the ballast to the lamp is faster, which reduces the energy consumption. Electronic chokes do not heat up during operation.

GSE electronic ballast can manage all kind of MH metal highlight and HPS high pressure sodium bulbs at 250-400-600W.

A UV- acid- and waterproof foil build in LED indicate the status and on 3knobs you can change the wattage. By steps from 660W-600W-400W-250W or with push and hold even step less from 660W to 250W. GSE uses only finest high quality components such as aluminium casted long live and high temperature electrolytic capacitor, transistors PhilipsNXP, high frequency ISKRA components etc... and source >84% EU manufactured components.

A extremely big-surface aluminium radiator keeps the running temperature low and provides a long life of the components. The high frequecy above 80kHz to 220kHz avoids acustic resonance of the bulb. The ballast comes as a finish assembled product with 3m connector cable and 4m lamp cable to connect to the reflector E40. It is all waterproof sealed and have IP64 protection class.
 

Lumii Black 600w Digital Ballast 250w-660w

This 600w Electronic Ballast is supplied as a stand-alone ballast with a flying IEC lead so you can add any reflector fitted with an IEC socket to start growing. The ballast features both dim and boost functions, having the ability to control the light output from the lamp.

​​​​​​​The ballast features both dim and boost functions, having the ability to control the light output from the lamp. There are two dimmable options (250w & 400w) and a ‘super-lumens’ boost option (600w+Boost) which is on average an extra 10% increase in output. 
For best results, always use the correct lamp per wattage setting

More light output per watt of energy consumed

More light output per watt of energy consumed

Ultra quiet!

Ultra compact and cooler operation

Ultra lightweight

• Electronic ballast for 250W or 400W HPS or MH lamp
• Voltage: 230V 50/60Hz
• Current: 1.90A
• Input power: 440W
• Output power: 420W
• Power factor: >0.99
• Voltage range: 175~275V
• THD: <8%
• Lamp CCF: <1.7
• Operating Frequency: high frequency
• No audible noise, no flicker
• Env. temp.: -25~50°C(-13~122°F)
• Enclosure temp. rise ((Δt) 29°C (84.2°F)
• Env.IP require: >IP23

INSTRUCTIONS:

•  
• To light a 250W lamp; set control to 250W and boost output by 10% by switching to 250SL.
• To light a 400W lamp; set control to 400W and boost output by 10% by switching to 400SL or dim down to 250SL or 250W.

Electronic throttle with microprocessor control!

Lumatek digital ballasts offer the most advanced technology on the market for greenhouse lighting. Compact and completely silent, they have the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the lamp model used and its condition, as well as to the mains voltage.

WHAT ARE THE ADVANTAGES OF HIGHER LIGHT EMISSION?
More light with less energy consumption and hence, greater productivity on the same surface. By using a suitable reflector, the increased light can be distributed over a larger surface.

​

Digital Ballast Lumatek provides the most advanced technology on the market for greenhouse lighting. 

Compact and completely silent, it has the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the model's lamp and its condition as well as to network's voltage. Lumatek Twin 600W 240 V is adjustable, electronic ballast for use with one or two 600W and / or 400W 240V HPS and MH lamps  for plants.

Why Digital Ballasts?

• More Lumen Output - Up to 20% more lumens output than some old style magnetic ballasts ...More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard to try to keep up with Lumatek’s lumen output.
• Stable Light Output - Excellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.
• Fast Start-up - It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes.
• Completely Silent - No noise or vibration of any kind
• Produce Less Heat - Less heat generated by the ballasts allows cooler running of the environment. Less heat is less wasted electricity.
• Longer Bulb Life - Lumen output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.

LUMATEK 1000W AC DIGITAL BALLAST FEATURES: 

• Runs 400W, 600W and 1,000 MH or HPS lamps
• Fully Dimmable
• Staggered Ignition Technology (will light multiple bulbs in a sequence)
• Super Lumens feature for 1000+ watt operation
• Whisper quiet fan and lightweight
• Dual-Voltage with the same light output on 120V or 240V @ 50/60 Hz
• Input Power: 1030w, Ouput Power: 1000w
• Power Factor: >0.99
• Voltage Range: 108 to 264v
• THD: <8%
• Environment Temperatures: -25 to 50 C (-13 to 122 F)
• FCC compliant, ETL listed

This is the most effective digital ballast on the market!

Powers two 600 watt bulbs or fixtures at the same time from a single outlet. Separate on/off switches and dimmers for each output; choose between running only one lamp or two. Works with all lamps and features Improved RF shielding. This is the ideal ballast to use with the Horizon Dual Socket Super Nova Reflector. 

This ballast is also dimmable, it can run at 50% or 75% of full power. Adjustments are done by dials located on the top of the unit, it features a gradual dim that eases your bulb into the lower or higher wattage. The Nanolux 600w Dimmable Dual Ballast is ideal for use with either two reflectors in close proximity or with a dual bulb reflector setup.

• ​600W
• Input Voltage: 120-240
• Input Current: 5.2/2.6A
• Bulb: SE
• Dimming Settings: 110%, 100%, 75%, 50%
• PF: >0.99
• THDI: <10%
• CF: <1.7
• Input Frequency: 50/60
• 3 Year Bumper to Bumper Warranty

This is the most effective digital ballast on the market!

Digital 600W Digital Ballast

New economic ballast, slim and compact.Made of quality materials, with built-in dynamometer, Watt regulator.HPS and MH lamps can work with this oneIt is silent and thanks to its construction material, it is not heated.

With a 600-watt light bulb, you can operate the transformer on 4 modes, 250W, 400W, 600W, and 600W Super Lumens, delivering 10% extra light from the magnetic transformers.

Specifications:

• Output Voltage: 240V
• Power: 315W
• Amperage: 1.4
• Maximum temperature: 70ºC
• Type: LEC / CMH
• Dimensions: 228.6x113.8x80.7mm.

Electromagnetic start-regulating device for sodium and metal halide lamps

This ballast allows the stabilization of the current supplied to the output while guaranteeing a greater stability of the light flow and therefore a longer duration of the lamps. Closed body type for further insulation and safety.

Suitable for lighting HPS and MH 600W bulbs.

• Power of 600w or more
• Works with both HPS and MH lamps
• Easy to install
• Long distance to connect to the lamp, up to 15m
• Thermal switches for short circuit protection
• Pre-wired input and power cable
• CE certified

1000W ballast for lighting HPS and MH lamps

High quality 1000 w ballast in Class II. Made in Italy, robust and completely safe, which complies with European legal regulations and tested in accordance with: EN61347-1-2-9, EN60923, EN55015 among others. Very simple connection through the scheme shown. The lamp can be connected at a maximum distance of 16 meters.

• Power (W): 1000
• Output Voltage (V): 230
• Amperage: 10.3А
• Dimensions (mm): 213x176x360

Ballast with a rated power of 250 W. Appropriate for High Pressure Sodium and Metal Halide bulbs.

Quality Lighting Ballast

ETI Magnetic Ballast 250w has been designed for HPS and MH AGRO lamps. Power supplies (o ballast) ETI UAL series are defined “Hybrid” as it equipped with an electronic circuit which integrates the functions lighter and capacitor. The latest models of this series have been improved and adapted to the ignition of all gas discharge lamps. The compact body and wiring in the absence of external leads, make this product particularly suitable for application in the grow room.

This ballast allows the stabilization of the current supplied in output at the same time guarantees a greater stability of the luminous flux and consequently a greater duration of the lamps. The ignition systems ETI have closed for further isolation and safety, It is wired easily thanks to the screw terminals on the front.

Suitable for the lighting of bulbs HPS and MH 250W.

600W ballast for lighting HPS and MH lamps

Specifications:

• CE approved ballast 
• Running quiet and high efficient 
• With no top housing design for beter cool

1000W ballast for lighting HPS and MH lamps

Specifications:

• CE approved ballast 
• Running quiet and high efficient 
• With no top housing design for beter cool

Electromagnetic ballast for HPS and MH lamps.

Master Gear suitable for coupling with sodium or metal halide lamps with power 600W. The maximum possible distance from the lamp to the throttle is 20 meters for HPS and 5 meters for MH lamps. MASTER GEAR 600W consists of inductors, capacitor and terminal block for connecting input voltage and lamp. 6,2A.

GIB Ballast PRO-V-T 600W with Thermal Fuse

PRO-V-T ballast without internal cable connections, built-in thermostat for automatic over-heating, silent thanks to the anti-vibration base.

• Silent and low vibration due to its anti-vibration base
• Thermal fuse: Excludes the possibility of overheating
• Intelligent shutdown
• Device with a linear fuse
• By standards meeting the requirements for European certification (CE) and European electrical certification standards (ENEC)
• With an explosion-proof capacitor

MST 600W is an electromagnetic start-regulating device for sodium and metal halide lamps

It consists of a choke, a starter ("lighter"), a capacitor and a control circuit.

• Warranty: 1 year from date of sale
• 230V, 50Hz; λ>0.9; starting voltage 5KV;
• Cable to lamp <20m (HPS), <2m (MH);
• Protection class IP 20;

Chokes (ballasts) adjust the voltage supplied to the selected lamp, up to the working one for it and ignite the lamp by creating a high voltage pulse after the interruption of the current from the starter. Magnetic chokes are compact and cost-effective devices that are suitable for "lighting" lamps from 250W to 1000W. It is recommended that chokes be kept outside of smaller grow rooms, as they convert some of the electricity they absorb into heat and can thus contribute to an increase in temperature.

The EuroGear Pro ballast closes the gap between cheap low-quality ballasts and expensive high-end products

Among IP 54 and CE certifications the EuroGear Pro is equipped with a thermal protection to eliminate potential danger of fire. Additionally after production every single ballast is being checked for full operability, so that a safe continuos operation is guaranteed.
The EuroGear Pro is fully cabled.

Specifications

• Compact electromagnetic ballast with thermal protection
• 100% EU
• for HPS and HPI-type lamps
• IP 54 and CE certified
• Excellent cost-benefit ratio
• Splashproof enclosure
• 230V/ 50Hz
• Power cable length: 1.5 m
• Lamp cable length: 3.55 m

The EuroGear Pro ballast closes the gap between cheap low-quality ballasts and expensive high-end products.

Among IP 54 and CE certifications the EuroGear Pro is equipped with a thermal protection to eliminate potential danger of fire. Additionally after production every single ballast is being checked for full operability, so that a safe continuos operation is guaranteed. The EuroGear Pro is fully cabled.

Specifications

• Compact electromagnetic ballast with thermal protection
• 100% EU
• for HPS and HPI-type lamps
• IP 54 and CE certified
• Excellent cost-benefit ratio
• Splashproof enclosure
• 230V/ 50Hz
• Power cable length: 1.5 m
• Lamp cable length: 3.55 m

This system will allow you to duplicate the cultivation area with a single focus.

SunRail is a system of lightweight, adjustable and self-propelled rails that carry a lighting system (or several) along a 1.90 meter long aluminum rail and can cover an effective illuminated area of 1.20 x 3.50 meters. SunRail can supports up to 3 devices simultaneously thanks to the high resistance of the aluminum and the high-performance motor that drives the system.

This system is ideal for use with an Adjust a wings reflector to increase light projection.

Using the "spreader", which reduces the heat emitted by the lamp, the reflector can be lowered 20cm above the tops of the plants. It can also be installed under the lamp to be able to get as close as possible to the tops of the plants, without the risk of burning. The light is diffused and reflected to the reflector for more even illumination. Suitable for 1000W lamps.

Using the "spreader", which reduces the heat emitted by the lamp, the reflector can be lowered 20cm above the tops of the plants. It can also be installed under the lamp to be able to get as close as possible to the tops of the plants, without the risk of burning. The light is diffused and reflected to the reflector for more even illumination. Suitable for lamps from 400W to 600W.

Moves the lighting back and forth along a 220cm long rail.

In this way, it can be placed closer to the plants , as it does not stay in one place for long. Increases lamp efficiency and life.

Features:

• Travel speed - 3-3.30 minutes in one direction
• Movement pause from 2 to 120 seconds.
• Adjust the movement speed
• Possibility to limit the lifting by means of clamps.
• Holds up to 10 kg
• Drive motor power: 12W

Reflector complete with two CFL 2x55W lamps.

Suitable for germination as well as the vegetation phase.

This reflector is characterized by its absolute stability.

Gloria reflector with cooling Ф150mm

This reflector gives your garden the light it needs, without unnecessary heat.

Features:

• Wide spread of light allows plants to be spaced close together for maximum light in low light areas
• Made of heavy-duty, pre-galvanized steel
• The fully sealed glass ensures a snug fit
• Made from precision 95% reflective European aluminum
• Comes with built-in socket, 5m power cable and hanging hooks
• Reflector size: 50CM x 70CM x 20CM

Wide spread of light allows plants to be closely spaced for maximum light delivery in low light areas. Fitted with safety cables for safe and easy maintenance, constructed from galvanized steel.

The fully sealed glass ensures a tight fit to the reflector body. Made from precision 95% reflective, European aluminum . Comes with built-in socket, pre-wired, complete with hanging hooks.

• High quality aluminum
• The safety cable holds the glass door in place
• Fully sealed with hinged glass
• Built-in socket
• Dimensions: H/W/D 25cm x 68cm x 90cm
• Accepts: HPS / MH bulbs from 400W to 1000W

Monster Warriors Ф200 Air-cooled reflector for 400 W, 600 W and 1000 W sodium (HPS) and metal halide (MH) lamps

Reflects up to 99% of light.

• Reflector size: 60 x 62 x 30cm
• The size of the holes is Ф200mm

Monster Warriors Ф150 Air-cooled reflector for 400 W, 600 W and 1000 W sodium (HPS) and metal halide (MH) lamps.

Reflects up to 99% of light.

• Reflector size: 60 x 62 x 30cm
• The size of the holes is F150

The Raptor 8" was developed for those who want more.

Closed-type coolable reflector. Heat-resistant glass protects and limits heat. It is equipped with two F200 ventilation holes. The socket has four positions for moving horizontally. The Raptor 8" Dual is equipped with two sockets. Two identical bulbs (HPS or MH) or two different ones (HPS and MH) can be included. Capacity: two bulbs.

• Reflector dimensions: 105cm x 77cm x 27cm.
• Carton dimensions: 110cm x 84cm x 34cm.
• Dimensions of the flanges: Ф200.
• Cable length: 4m
• Reflectivity: 95%
• Ability to move the lamp horizontally
• suitable for two lamps: 600-1000W HPS and MH
• Warranty: 5 years

Raptor 8" is designed for those who want more. Closed-type cooling reflector. Heat-resistant glass protects and limits heat. It is equipped with two Ф200 ventilation holes. The socket has four positions for moving horizontally. Capacity: one bulb .

• Reflector dimensions: 105cm x 77cm x 27cm.
• Carton dimensions: 110cm x 84cm x 34cm.
• Dimensions of the flanges: Ф200.
• Cable length: 4m
• Reflectivity: 95%
• Recommended ventilation: 1100m3/h
• Warranty: 5 years

These fantastic reflectors are truly exceptional in controlling the temperature of the grow room and as a result; providing high yields.

Featuring tempered 4mm flat glass to keep heat away from your plants, it can vent heat through the two vents that can be connected to an air duct only or a small fan. The reflector features highly reflective interior wings to maximize your light output, and your plant will be able to grow up to inches below the reflector .

This is a highly efficient way of lighting any large room and several Aerowings can be joined together creating highly efficient lighting. Each kit comes with hanging hooks, an adjustable socket, 5 meters of cable with IEC connection, as well as a glass panel and frame.

• It can be connected to a 150mm air duct.
• Dimensions: 20 x 60 x 54cm

Completely sealed with double glass and an airtight seal, this reflector has a stable construction and a stopper that prevents it from falling down sharply.

It has 6 integrated fittings in the case and air-cooling design. The body is made of galvanized steel and highly reflective, textured aluminum. Includes socket and 4.5m cable.

• Hole size: Ф150
• Manufacturer: Sun System
• dimensions: 64 x 39.70 x 27.60 cm