Ballasts
Ballasts regulate the voltage supplied to the selected lamp and lights the lamp, creating a high-voltage pulse after a power outage from the starter. Divided into two types - electromagnetic and electronic ballasts. The difference between the two is that the electronic ballast does not require a starter and is usually lighter and heats less. Other advantages are a quiet operation of the conventional reactor, increasing lamp life by 30% - 50% and reduced ripple luminous flux.
Tomax 400W Magnetic Ballast
Ballast With a Rated Power of 400 W. Appropriate for High Pressure Sodium and Metal Halide bulbs.
Quality Lighting Ballast
This ballast allows the stabilization of the current supplied in output at the same time guarantees a greater stability of the luminous flux and consequently a greater duration of the lamps. Closed body for further isolation and safety, It is wired easily thanks to the screw terminals on the front.
Suitable for the lighting of bulbs HPS and MH 400W.
MST 600W ballast
MST 600W is an electromagnetic start-regulating device for sodium and metal halide lamps
It consists of a choke, a starter ("lighter"), a capacitor and a control circuit.
- Warranty: 1 year from date of sale
- 230V, 50Hz; λ>0.9; starting voltage 5KV;
- Cable to lamp <20m (HPS), <2m (MH);
- Protection class IP 20;
Chokes (ballasts) adjust the voltage supplied to the selected lamp, up to the working one for it and ignite the lamp by creating a high voltage pulse after the interruption of the current from the starter. Magnetic chokes are compact and cost-effective devices that are suitable for "lighting" lamps from 250W to 1000W. It is recommended that chokes be kept outside of smaller grow rooms, as they convert some of the electricity they absorb into heat and can thus contribute to an increase in temperature.
Solux magnetic 1000W ballast
1000W ballast for lighting HPS and MH lamps
High quality 1000 w ballast in Class II. Made in Italy, robust and completely safe, which complies with European legal regulations and tested in accordance with: EN61347-1-2-9, EN60923, EN55015 among others. Very simple connection through the scheme shown. The lamp can be connected at a maximum distance of 16 meters.
- Power (W): 1000
- Output Voltage (V): 230
- Amperage: 10.3А
- Dimensions (mm): 213x176x360
Magnetic ballast solux 250W
Ballast with a rated power of 250 W. Appropriate for High Pressure Sodium and Metal Halide bulbs.
Quality Lighting Ballast
- Solux ballasts are suitable for both sodium and metal halide lamps.
- They incorporate a thermal protection chip. They offer a high efficiency, long duration, comfortable and uniform light based on the reduction of the loss of power and the increase of the luminous efficiency. The lamps start without flashes and provide a stable and quite silent light.
magnetic ballast Tomax 600W
Electromagnetic start-regulating device for sodium and metal halide lamps
This ballast allows the stabilization of the current supplied to the output while guaranteeing a greater stability of the light flow and therefore a longer duration of the lamps. Closed body type for further insulation and safety.
Lumatek 1000W dimmable
Digital Ballast Lumatek provides the most advanced technology on the market for greenhouse lighting.
Compact and completely silent, it has the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the model's lamp and its condition as well as to network's voltage. Lumatek Twin 600W 240 V is adjustable, electronic ballast for use with one or two 600W and / or 400W 240V HPS and MH lamps for plants.
Why Digital Ballasts?
- More Lumen Output - Up to 20% more lumens output than some old style magnetic ballasts ...More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard to try to keep up with Lumatek’s lumen output.
- Stable Light Output - Excellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.
- Fast Start-up - It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes.
- Completely Silent - No noise or vibration of any kind
- Produce Less Heat - Less heat generated by the ballasts allows cooler running of the environment. Less heat is less wasted electricity.
- Longer Bulb Life - Lumen output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.
LUMATEK 1000W AC DIGITAL BALLAST FEATURES:
- Runs 400W, 600W and 1,000 MH or HPS lamps
- Fully Dimmable
- Staggered Ignition Technology (will light multiple bulbs in a sequence)
- Super Lumens feature for 1000+ watt operation
- Whisper quiet fan and lightweight
- Dual-Voltage with the same light output on 120V or 240V @ 50/60 Hz
- Input Power: 1030w, Ouput Power: 1000w
- Power Factor: >0.99
- Voltage Range: 108 to 264v
- THD: <8%
- Environment Temperatures: -25 to 50 C (-13 to 122 F)
- FCC compliant, ETL listed
Lumatek NXE 600W
Electronic throttle with microprocessor control!
Lumatek digital ballasts offer the most advanced technology on the market for greenhouse lighting. Compact and completely silent, they have the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the lamp model used and its condition, as well as to the mains voltage.
WHAT ARE THE ADVANTAGES OF HIGHER LIGHT EMISSION?
More light with less energy consumption and hence, greater productivity on the same surface. By using a suitable reflector, the increased light can be distributed over a larger surface.
Lumatek NXE 400W
Compact and completely silent, it has the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the model's lamp and its condition as well as to network's voltage.Lumatek Twin 600W 240 V is adjustable, electronic ballast for use with one or two 600W and / or 400W 240V HPS and MH lamps for plants.
Why Digital Ballasts?
- More Lumen Output - Up to 20% more lumens output than some old style magnetic ballasts ...More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard to try to keep up with Lumatek’s lumen output.
- Stable Light Output - Excellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.
- Fast Start-up - It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes.
- Completely Silent - No noise or vibration of any kind
- Produce Less Heat - Less heat generated by the ballasts allows cooler running of the environment. Less heat is less wasted electricity.
- Longer Bulb Life - Lumen output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.
- Electronic ballast for 250W or 400W HPS or MH lamp
- Voltage: 230V 50/60Hz
- Current: 1.90A
- Input power: 440W
- Output power: 420W
- Power factor: >0.99
- Voltage range: 175~275V
- THD: <8%
- Lamp CCF: <1.7
- Operating Frequency: high frequency
- No audible noise, no flicker
- Env. temp.: -25~50°C(-13~122°F)
- Enclosure temp. rise ((Δt) 29°C (84.2°F)
- Env.IP require: >IP23
INSTRUCTIONS:
- To light a 250W lamp; set control to 250W and boost output by 10% by switching to 250SL.
- To light a 400W lamp; set control to 400W and boost output by 10% by switching to 400SL or dim down to 250SL or 250W.
Lumii Digita ECO 1000W
More light output per watt of energy consumed
Ultra quiet!
Ultra compact and cooler operation
Ultra lightweight
Lumii Digita ECO 600W
More light output per watt of energy consumed
Ultra quiet!
Ultra compact and cooler operation
Ultra lightweight
Lumii Digita ECO 400W
More light output per watt of energy consumed
Ultra quiet!
Ultra compact and cooler operation
Ultra lightweight
Lumii Black ballast 600W
Lumii Black 600w Digital Ballast 250w-660w
This 600w Electronic Ballast is supplied as a stand-alone ballast with a flying IEC lead so you can add any reflector fitted with an IEC socket to start growing. The ballast features both dim and boost functions, having the ability to control the light output from the lamp.
The ballast features both dim and boost functions, having the ability to control the light output from the lamp. There are two dimmable options (250w & 400w) and a ‘super-lumens’ boost option (600w+Boost) which is on average an extra 10% increase in output.
For best results, always use the correct lamp per wattage setting
Compact DIMMABLE 600W pPowerlux Line
Digital ballast 600 W
Economical, slim and compact! Made of quality materials with built-in dynamometer and power regulator. It can work with HPS and MH lamps. It is quiet and thanks to the material made it does not heat up. With a 600-watt bulb you can control the transformer in 4 modes: 250W, 400W, 600W and 600W Super Lumens, delivering 10% extra light in excess of the magnetic chokes.
GSE dim 250W-660W
GSE electronic ballast can manage all kind of MH metal highlight and HPS high pressure sodium bulbs at 250-400-600W.
A UV- acid- and waterproof foil build in LED indicate the status and on 3knobs you can change the wattage. By steps from 660W-600W-400W-250W or with push and hold even step less from 660W to 250W. GSE uses only finest high quality components such as aluminium casted long live and high temperature electrolytic capacitor, transistors PhilipsNXP, high frequency ISKRA components etc... and source >84% EU manufactured components.
A extremely big-surface aluminium radiator keeps the running temperature low and provides a long life of the components. The high frequecy above 80kHz to 220kHz avoids acustic resonance of the bulb. The ballast comes as a finish assembled product with 3m connector cable and 4m lamp cable to connect to the reflector E40. It is all waterproof sealed and have IP64 protection class.
Compact DIMMABLE 600W dimmable ballast
Digital 600W Digital Ballast
New economic ballast, slim and compact.Made of quality materials, with built-in dynamometer, Watt regulator.HPS and MH lamps can work with this oneIt is silent and thanks to its construction material, it is not heated.
With a 600-watt light bulb, you can operate the transformer on 4 modes, 250W, 400W, 600W, and 600W Super Lumens, delivering 10% extra light from the magnetic transformers.
