PROMO LIGHTING

If you need quality LED lighting at the best price, LUMii BLACK 720W LED is a great choice!

If you need quality LED lighting at the best price, LUMii BLACK 720W LED is a great choice!

The TOMAX 645W SE LED Grow Light features 6 LED bars, a high-quality driver and efficient LEDs, generating a full spectrum for every stage of your plants' development. A suitable light source for the entire development cycle from vegetative to the end of flowering . The lamp has a dimmer to adjust the power according to the needs of the plants and the stage of their development.

TOMAX 645W Foldable LED Grow Light is designed with 6 LED bars, high quality Inventronics driver and Samsung and Osram LEDs, generating full spectrum. A suitable light source for the entire development cycle from vegetative to the end of flowering. For the different varieties and periods, the lamp has a dimmer to adjust the power according to the needs of the plants and the stage of development.

Features:

• Optimized Full Spectrum
• Dimensions: 270*283*85mm
• Life: > 50,000 hours
• LED pcs.: 60pcs x 3W BridgeLux / Epistar LEDs
• Maximum power: 180W
• Average power: 140W
• View Angle: 90 degrees and 120 degrees mixed LEDs
• Operating temperature: -20 to 40 degrees
• 2200Lm
• Illuminated area : about 1.0m².

Features:

• Optimized Full Spectrum
• Dimensions: 383*283*85mm
• Life: > 50,000 hours
• LED pcs.: 90pcs x 3W Bridgelux / Epistar LEDs
• Maximum power: 270W
• Average power: 200W
• Angle: 90 degree and 120 degree mixed LEDs,
• Operating temperature: -20 to 40 degrees
• 3600Lm
• Illuminated area: about 1.5m²

Features:

• Optimized Full Spectrum
• Dimensions: 609*283*85mm
• LED pcs.: 150 pcs x 3W Bridgelux / Epistar LEDs
• Maximum LED power: 450W
• Average power: 364W
• View Angle: 90 degrees and 120 degrees mixed LEDs
• Operating temperature: -20 to 40 degrees
• Life: > 50,000 hours
• 6000Lm
• Illuminated area: about 3.0m²

Features:

• 12000lm
• Dimensions: 1174*283*85mm
• 15 diodes per module
• PAR reading: 1600μmol/m2/s at 30cm distance
• LED pcs.: 300 pcs x 3W Bridgelux / Epistar LEDs
• Maximum power: 900W
• Average power: 630W
• Angle: 90 degrees and 120 degrees mixed LEDs
• Operating temperature: -20 to 40 degrees
• Illuminated area: about 6.0m²

These new energy saving light bulbs give low power consumption and bring. Plants due to their wide spectrum of light safely through the growth and bloom phase

• Elektrox Flower 200W
• CFL for flower
• 2700K
• 6U 
• E40 socket
• integrated electronic balast
• 9000lm

A 250W lamp suitable for both growing and flowering stages.

Stimulates photosyntesis due to the emitted blue light.

Range features

• Patented arc tube delivers highest photosynthetic efficiency of any lamp in the world
• Performance maintained at an exceptional level due to improved structure of outer bulb
• Optimised for the highest Phytolumens or PAR output
• GroLux light spectrum maximises red output essential for plant growth
• Industry leading lumen maintenance of 95% at the end of life
• Suitable for a plethora of applications related to plant growth

The Philips SON-T PIA model is an ideal option for the flowering period of your plants

These lamps contribute to better absorption of CO2 , to better and better photosynthesis and growth. Son-T Pia lamps emit the highest amount of light per unit watt (PAR). It is the most efficient lamp with the best technical performance and the lowest energy consumption. It is switched on by means of a choke/ballast, placed 50-60 cm from the top of the plants.

• socket E40;
• specially optimized for flowering;
• real power: 603W ;
• current through the lamp: 5.8A;
• voltage: 110V;
• light output: 86,500Lm;
• life: 20000 hours;
• color temperature: 2000K;

The growth, fruiting, hardiness and even flowering time of plants are completely dependent on the light they receive. The quality and intensity of the light, as well as the duration of lighting are extremely important! Building the right lighting system would guarantee you excellent results.
HPS lamps emit red light that helps increase production in the flowering phase.

Metal halides have the more balanced spectrum.

The light they give out has a significant amount of light from the bluer end of the spectrum, which the plant uses to grow vegetatively. It produces plants with a small internodal length, with large leaves and thick stems. It produces the most natural looking plants. It simulates the light from the beginning of the year and is good for plants before they're switched into flowering mode.

They're normally slightly more expensive than HPS. Recently, there have been 'enhanced spectrum' MH bulbs produced which also give off a significant amount of red light. Conversion bulbs are also available which plug into HPS ballasts which are actually MH bulbs. Useful for changing the light balance without changing the ballasts also. In the event of a power failure, they need about 20 minutes before restating.

They may restart earlier but it shortens the life of the bulb quite dramatically to try and start a hot bulb.

• Power Plant HIT/HBU/LU Metal Halide Lamp - 250 watt.
• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.250w hps = 23,000 lumens

Metal halides have the more balanced spectrum.

The light they give out has a significant amount of light from the bluer end of the spectrum, which the plant uses to grow vegetatively. It produces plants with a small internodal length, with large leaves and thick stems. It produces the most natural looking plants. It simulates the light from the beginning of the year and is good for plants before they're switched into flowering mode.

They're normally slightly more expensive than HPS. Recently, there have been 'enhanced spectrum' MH bulbs produced which also give off a significant amount of red light. Conversion bulbs are also available which plug into HPS ballasts which are actually MH bulbs. Useful for changing the light balance without changing the ballasts also. In the event of a power failure, they need about 20 minutes before restating. They may restart earlier but it shortens the life of the bulb quite dramatically to try and start a hot bulb.

• Power Plant HIT/HBU/LU Metal Halide Lamp - 1000 watt.
• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.400w hps = 38,000 lumens

Power Plant HIT/HBU/LU Metal Halide Lamp - 600 watt.

• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.

We recommend that lamps are replaced every 12 to 14 months, after 14 months there is an appreciable drop in the lumen output leading to a reduction in crop yield 


600w hps = 51,000 lumens
 

Power Plant HIT/HBU/LU Metal Halide Lamp - 1000 watt.

• Power Plant Metal Halide lamps promote optimum vegetative growth and flowering.
• Provides a richer more nutritious light
• Compatible with standard HPS ballasts and ignitor systems. Lamps can simply be changed to maximise growth protential.

We recommend that lamps are replaced every 12 to 14 months, after 14 months there is an appreciable drop in the lumen output leading to a reduction in crop yield 


1000w hps = 100,000 lumens

The first dedicated CFL for root development and propagation

The 2700k spectrum of the EnviroGrow CFL Super Cool self ballasted compact fluorescent lamps is quite unique. Developed by PowerPlant it is dedicated to root development and propagation.

The EnviroGrow CFL Super Cool units feature ultra high output compact fluorescent lamps that are powered by an integral power unit. This unit is soon to have dedicated packaging to show it is Super Cool White. Ideal for Ttssue culture laboritories, growing stock plants and cloning for hobbyists and professionals.

The color emitted by these lamps is very distributed throughout the spectrum.

It contains some colors of the spectrum that are not found in mercury lamps, so halogenides are more suitable for the growth of plants, emitting a blue / white light. Within the halide lamps used in indoor gardening, the most used are the SUNMASTER due to the development, branching, dry weight, production, etc. that is achieved with them. 600W bulb.

• Wattage: 600W
• Mains Voltage (V): 400V
• Rated Hours: 6000
• CCT (K): 4500 K
• Luminous Flux (lm): 50 000
• Bulb Screw: E40

Electronic throttle with microprocessor control!

Lumatek digital ballasts offer the most advanced technology on the market for greenhouse lighting. Compact and completely silent, they have the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the lamp model used and its condition, as well as to the mains voltage.

WHAT ARE THE ADVANTAGES OF HIGHER LIGHT EMISSION?
More light with less energy consumption and hence, greater productivity on the same surface. By using a suitable reflector, the increased light can be distributed over a larger surface.

​

This reflector is characterized by its absolute stability.

This reflector is characterized by its absolute stability.

Adjust-A-Wings is a high-end reflector equipped with a Super Spreader for even higher efficiency.

Manufactured from the highest quality materials, this reflector brings a number of benefits to both plants and gardeners. Designed for maximum efficiency, the Avenger model is made with a coating of fused glass and titanium dioxide, using PVD (Physical vapor deposition). technology - the most advanced technique for laying reflective surface layers on a number of work surfaces. This coating is the most reflective, most durable and sustainable coating known to science.

• Twice the power and efficiency of most other reflectors on the world market;
• Increase the cultivation area, with each lamp, by up to 75%;
• Increases lamp performance up to 50%;
• Reduces heat, saves energy;
• Corrosion resistant;
• 97% Reflection;
• Super Alloy glass coating;
• Adjustable double, parabolic reflectors.
• Dimensions: 100cm x 70cm
• Suitable for: 1000W or 2x400W, 2x600W sodium (HPS) or metal halide (MH) lamps
• Illuminated area: Up to 3.89 m2.

SPUDNIK is an ideal aircool reflector, providing lamp cooling by allowing the hot air around the lamp to be drawn out of the room before it has a chance to create high heat.

SPUDNIK has been the choice of professionals for years, with an extremely efficient reflector: 97% reflectivity!

• 97% reflectivity
• Miro9 - internal reflector
• Includes 4mm thick glass sheet
• Flange - 125mm (5") or 150mm (6")