The Bluelab pH Controller monitors and adjusts the pH levels of your nutrient solution for you !

• Automatic control and monitoring of pH in tanks up to 760l.
• Large and easy-to-read display with green backlight
• Easy-to-navigate programming and setup menu
• Easy pH calibration using on-screen instructions
• Flashing alarms for low or high values
• Dosing interlocks to protect against overdosing
• Automatic resumption of dosing upon restart in case of power failure
• Waterproof design with wall mount option
• 4 meters of alkali-resistant tube for dosing pH regulator
• Use with undiluted pH regulator
• Bluelab pH Probe replacement probe included
• Replaceable peristaltic pump and tubing

Features:

• Measures pH and temperature
• Measures in °C and °F
• LCD display
• Fixed plug
• Indicator of successful pH calibration
• Function Hold Indication
• Low Bat
• Fully waterproof
• Automatic shut-off
• Automatic temperature compensation

The Bluelab EC pen is the latest innovation in handheld EC meters and is the ultimate solution when it comes to EC measurement.

Measure pH, conductivity and temperature on the go. The Bluelab Combo Meter provides ultimate convenience by taking care of all three fundamentals of nutrient absorption simultaneously.

Not only that, but this multi-parameter meter and its probes feature a brilliantly simple design. The Bluelab pH probe is easy to use, clean and calibrate; when the time comes, it's also easy to replace. Similarly, the Bluelab Conductivity Probe has straightforward functionality that does not require additional calibration.
 

How to use the Bluelab EC pen:

• The conductivity pen comes with a battery and is ready to use out of the box.
• The pen is factory calibrated.
• Press the power button to turn on the Bluelab Conductivity Pen.
• To turn off the pen, press and hold the power button until OFF is displayed.
• The pen will automatically turn off after 4 minutes to conserve battery power.
• Place the probe tip into your nutrient solution and wait for the reading to stabilize.
• Rinse under running tap water after use.

Characteristics:

• Blue light display
• No calibration required
• EC, CF and ppm 500 and ppm 700 scales
• Fully waterproof
• Automatic on/off function

Measure pH, conductivity and temperature on the go. Bluelab Combo Meter Plus provides ultimate convenience by taking care of the three main factors of nutrient absorption simultaneously.

Not only that, but this multi-parameter meter and its probes feature a brilliantly simple design. The Bluelab Leap pH probe is easy to use, clean and calibrate; when the time comes, it's also easy to replace. The Leap pH probe allows you to read the pH directly in the root zone. Similarly, the Bluelab Conductivity Probe has straightforward functionality that does not require additional calibration.

• Measures pH, conductivity (EC, CF, ppm 500 and ppm 700) and temperature (°C, °F)
• Easy to use, clean and calibrate
• Display for easy visualization of each measurement
• The Leap pH probe is safely stored and ready to measure right away
• Includes a conductivity probe without calibration
• 2-meter cable for measuring even in hard-to-reach places
• Automatic temperature compensation for accurate readings everywhere
• Customize the scales to your preference - conductivity in EC, CF, PPM 500 (TDS) or PPM 700; temperature in °C or °F
• Low battery indicator. Automatic shut-off function

The pH level of soils, substrates and nutrient solutions greatly affects crop performance.

• Measure more times with faster sensor response and direct measurements in substrates
• Suitable for many types of growing environments
• Durable probe tip for direct insertion into the root zone
• Simple calibration process, with two points and 30-day calibration indicator
• Backlit LCD display, low battery indicator, auto shut-off function
• 2 x AAA alkaline batteries included

Features:

• Measures pH, conductivity (EC, CF, ppm 500 and ppm 700) and temperature (°C, °F)
• Lightweight and portable
• Interchangeable dual compound pH probe
• Large and easy to read display
• Overrange or underrange indicators
• Easy pH calibration at the push of a button
• Low battery indicator.
• Automatic shut-off function
• Indicator of successful pH calibration
• 2x AAA alkaline batteries included
• No calibration required for conductivity and temperature
• 2m cable for measuring hard-to-reach places

BlueLab Guardian Monitor

The Bluelab Guardian Monitor is a continuous indicator of the current EC, pH and temperature levels of your nutrient solution, allowing you to optimize these parameters as your plants progress through each growing phase.

How to set up/mount and calibrate + technical specifications see below in the description

Bluelab pH Controller WiFi - 24/7 pH control of your tank anywhere, anytime from your phone.

• Built-in Wi-Fi (with option to disable)
• View and control on your mobile, visit Edenic.io for more information
• Safety interlocks prevent overdosing
• Automatic resumption of dosing after power loss
• Precise dosing of the pH regulator with the built-in Bluelab peristaltic pump
• Controls pH upwards (alkaline) or downwards (acidic).
• High/low alarms to alert you when parameters are out of range
• The dosing routine allows efficient mixing before the next dose
• 2-m/6-ft cable lengths for best positioning and viewing
• Built-in variable speed pump. Maximum 120 ml/min (4.06 fl oz)

Control and Monitor pH, EC and Temperature Wirelessly!

The Bluelab Pro Controller Connect offers a level of control that goes above and beyond anything that's been seen previously. You can monitor and adjust your nutrient strength and pH levels at a distance, using any device that's connected to the internet! Note that you'll need to use this controller in conjunction with a Bluelab Peripod, which does the actual dosing of nutrients, and pH adjusting.

• Monitors and manages nutrients and pH levels!
• Regulates the separately available Bluelab Peripod nutrient dosing system
• Can be controlled from anywhere in the world from any internet connected device
• Provides consistent, highly accurate readings
• Superior build quality
• Ideal for the larger scale grower
• Responds to your plants needs in real time
• Bright, plant safe green LED display, with water resistant main unit
• Automatically compensates for temperature fluctuations
• Includes the Bluelab Connect stick for wireless connectivity

Contains

• 1x Bluelab Pro Controller, and ‘Getting Started’ guide
• 1x Bluelab conductivity probe
• 1x Bluelab pH probe
• 1x Bluelab temperature/ATC probe
• 1x Bluelab connect stick & getting started guide
• 4x mounting screws
• 3x calibration sachets (pH 7.0, pH 4.0, EC 2.77)
• 1x Dosing cable, alarm & external lockout cable
• 1x 24V DC power supply with European, U.K, North America and New Zealand/Australia plug adapters.

Features:

• Selectable units for °C and °F
• Fully waterproof
• LCD display with backlight
• Read hold function
• Storage cap
• Automatic shut-off function

Instant root zone moisture, conductivity (EC) and temperature measurements with a single click 

• Measure moisture, conductivity (EC) and temperature directly in the root zone in one click 
• Connects to the Bluelab Pulse App to view, analyze and store all your measurement data. 
• Robust 8”/200 mm long-format stainless steel probes provide deeper insight 
• Use the built-in depth gauge to get consistent measurements with every reading 
• Works in soil, coco-coir, nutrient solution and other media*. 

*Does not work in media with large voids (Perlite), or media which can be permanently distorted (Rockwool). 

Accurate direct pH measurements in any substrate in seconds

• Reinforced tip for fast, direct measurement into substrates
• Effective in soil, coir mixes, mineral wool, potting mixes and mortar
• Dual-junction probe reduces reference contamination, extending longevity
• Fast sensor response for quick and accurate measurements
• Suitable for use with Bluelab Combo Meter, Bluelab Combo Meter Plus and Bluelab Multimedia pH Meter
• The BNC connector is coated to prevent corrosion

Bluelab Peripod M4 Pumps

Designed to be teamed up with the Bluelab® Pro Controller™ for a fully integrated solution for optimal reservoir dosing, the Bluelab® PeriPod™ is a simple and reliable inclusion.

The Bluelab® PeriPod™ responds to dosing triggers received from the Bluelab® Pro Controller™ and pumps pH adjusters and nutrient stock solutions into your reservoir using peristaltic pumps. Accurately measure, control and maintain pH levels. Grow sites are all different, so now you can choose the pump size to match your set up needs and add optional extras to your dosing system set up.

• ​​​​​​​1x 120ml/min, 4fl oz/min peristaltic pump for dosing pH adjuster solutions
• 3x 120ml/min, 4fl oz/min peristaltic pumps for dosing nutrient stock solutions
• Rugged wall mount design
• Individual pump priming and calibration
• Replaceable peristaltic pumps and tubing
• 4 metres / 13 feet of acid / alkaline resistant food grade tubing for dosing pH correction solution
• 3x 4 metres / 13 feet of food grade tubing for dosing nutrient stock solution
• Compatible with most modern growing systems including recirculating and drain to waste systems
• Compatible with Bluelab® Pro Controller™ and Bluelab® Dosetronic™ models