This digital fan controller is a temperature dependent speed controller for rooms with intake and exhaust fans.

The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. The digital fan controller is a temperature dependent speed controller for rooms with air flow in and out. The fan controller keeps the room temperature constant and under pressure to prevent odour from escaping. This fan controller can by used also as only air out regulator on two fans if there is a nature way of air in.

Sizes and technical data's:

• Case: WxHxD = 130x80x70mm
• Controller: WxHxD = 160x100x100mm
• Designed for: 2x5A / 2x1150W (2300W) / TRIAC 2x16A
• Volts: 230V / 50HZ
• Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
• 0.5°C accuracy from –10°C to +85°C
• Protection class IP54

The minimum speed controller is a temperature dependent controller for ventilated rooms with one or more fans.

Dimensions and technical specification:
Body: WxHxD= 130x92x105mm
Controller: WxHxD = 160x130x105mm
Developed for: 10A / 2300W / Triac 2x16A
Voltage: 230V / 50HZ
Digital sensor 5V measures temperature from –55°C to +125°C (–67°F to +257°F)
0.5°C with accuracy from –10°C to +85°C
Protection class: IP54

TIMER BOX II DELAYS THE LIGHTING AND HEATING (3 PHASE)

The GSE Control Unit (Timer Box III) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

TIMER BOX II DELAYS THE LIGHTING AND HEATING

The GSE Control Unit (Timer Box II) is a professional indoor growing timer & contactor system for turning on 6 x 600w lights.

ABOUT THIS CONTROL UNIT FOR INDOOR CULTIVATION

The timer box is used by several inductive loads such as high-pressure lamps with high switch on and off simultaneously. This turns on Contactor/Relay 4x600W loads.Model with heating socket is on when lights are off (power management)

YOU CAN MANAGE UP TO 8 GROW LIGHTS AT THE SAME TIME

This relay box for indoor growing switches two indipendent power circuits on and off. It's controlled by a third power cord which needs to be plugged to a commercial timer or a GSE timer box.

Each power circuit can handle 4x600W (total 8x600W lights).

SIZES AND TECHNICAL DATA:

• Case = 180x130x60mm
• Timer box: WxHxD = 160x100x90mm
• Volt: 2x230V / 50Hz
• Relays: 4x16A 230V
• Protection class: IP44

Stainless steel quick test with thermometer and probe

For seed transplantation. Easy to read. Grade 30 - 90 degrees Fahrenheit. Germination tips and transplant temperatures are included. Corrosion resistant aluminum body.

Features:

- Easy to read stainless steel thermometer with probe.

- For starters and seed transplants.

- Product type: Thermometer.

INSTRUCTIONS:

Insert 2 / 3rds of the probe into the soil. If you are testing the soil in a pot with a plant, carefully prick the thermometer near the pot walls to NOT injure the roots of the plant. Wait 30 seconds. See the temperature reading.

Ozone is an active form of oxygen.

Ozone is known to have a strong oxidizing effect on substances of any type, so it is used to neutralize bacteria and viruses, odors and gases, microorganisms and pests.

Removes even the strongest odors in large areas! Cornwall's ozonizer has a low power consumption (18w). You will be able to get rid of problematic conditions in the room at the touch of a button. Maintenance is limited to occasional cleaning to prevent dust accumulation.

• Place your ozonator about 1.80 m or 2 m from the ground so that it can work effectively by oxidizing each particle.
• There are two modes of operation, one is to operate normally, ie 2 minutes of operation and 20 minutes of pause. The second is used to remove strong odors that are already felt in the room.
• Initially, it will start operating for 15 minutes and after that, the amount of time it will be switched off until it reaches normal mode will decrease, ie 2 operating minutes every 20 minutes.

Eliminates:

- odors (eg, mold, cigarettes, cat litter) and harmful gases (eg organic solvents);
- viruses, bacteria, micro-organisms and spores of mold and fungi;
- prevents the spread of dust mites, pet irritants and cockroaches;
- completely sterilizes the environment in the room.

Technical data:

•   Model: OZ500
•   Input Voltage: + - 10% AC 220V
•   Voltage: 18W
•   Ozone production: 500 mg / h
•   2x adjustable modes for ozone diffusion
•   Adjustable operating time
•   Automatic switching on and off
•   Effective ozone distribution through a built-in fan
•   Ideal for neutralizing odors on surfaces of 20 to 60 m2
•   Dimensions: 30x21x10cm

 ATTENTION!

Ozone can corrode metal parts and damage organic matter!

OZONE HAS HUMAN RESPONSIBILITY. FOR FULL SAFETY DO NOT STAY IN THE ROOM Until the appliance is running and ventilate afterwards.

Destroys odors, vapors and spores 

• odors (eg. mildew, cigarettes, cat litter) and greenhouse gases (eg. organic solvents); 
• bacteria, viruses, microorganisms, mold spores and fungi; - Prevents the spread of dust mites, irritants in pets and cockroaches; 
• fully sterilized environment in the room. 

Garden shears

These scissors are equipped with springs so they open automatically, which greatly reduces hand fatigue , making these scissors great for people with arthritis, carpal tunnel. The Comfort Grip handles will make it easier for you to work for long periods of time without discomfort.

Ultra sharp blades:

These quality shears are made of stainless steel with precision sharpened blades and are ready to handle any type of vegetation.

Safe lock:

Equipped with microscopic seals for a safe and secure side closing mechanism. The design of these scissors is ideal for use whether you are right-handed or left-handed.

With these blades, you can easily reach between plants to cut just the area or part you want to cut with one hand and without damaging vital stems and branches.

Bud Clean Clippers, ideal for cuttings and pruning.

Handy manual trimmer that helps significantly shorten the time to remove the leaves.

It has a transparent plastic cover for better visibility, removable handle for convenient handling and removable grille for easy cleaning. This machine removes twigs and leaves, while retaining "colors" full without hurting them. Spin leaf does the work of 30 scissors! The kit contains a rubber seal and set of knives..

dimensions:

• Diameter: 43 cm
• height: 31 cm

MST 600W is an electromagnetic start-regulating device for sodium and metal halide lamps

It consists of a choke, a starter ("lighter"), a capacitor and a control circuit.

• Warranty: 1 year from date of sale
• 230V, 50Hz; λ>0.9; starting voltage 5KV;
• Cable to lamp <20m (HPS), <2m (MH);
• Protection class IP 20;

Chokes (ballasts) adjust the voltage supplied to the selected lamp, up to the working one for it and ignite the lamp by creating a high voltage pulse after the interruption of the current from the starter. Magnetic chokes are compact and cost-effective devices that are suitable for "lighting" lamps from 250W to 1000W. It is recommended that chokes be kept outside of smaller grow rooms, as they convert some of the electricity they absorb into heat and can thus contribute to an increase in temperature.

Digital 600W Digital Ballast

New economic ballast, slim and compact.Made of quality materials, with built-in dynamometer, Watt regulator.HPS and MH lamps can work with this oneIt is silent and thanks to its construction material, it is not heated.

With a 600-watt light bulb, you can operate the transformer on 4 modes, 250W, 400W, 600W, and 600W Super Lumens, delivering 10% extra light from the magnetic transformers.

Digital Ballast Lumatek provides the most advanced technology on the market for greenhouse lighting. 

Compact and completely silent, it has the highest efficiency - more lumens per watt than any other model. Microprocessor technology allows adjustment to the model's lamp and its condition as well as to network's voltage.Lumatek Twin 600W 240 V is adjustable, electronic ballast for use with one or two 600W and / or 400W 240V HPS and MH lamps  for plants.

Why Digital Ballasts?

• More Lumen Output - Up to 20% more lumens output than some old style magnetic ballasts ...More light equals more yield. We urge you to test this yourself with a good quality light meter. Be sure to also check how much power the ballast is using with an ammeter as many so called 600w magnetic ballasts now draw up to 750w as standard to try to keep up with Lumatek’s lumen output.
• Stable Light Output - Excellent for Pharmaceutical-agriculture, laboratories and other uses where precise regularized output is essential.
• Fast Start-up - It reaches full brightness in under one minute; magnetic ballasts typically take about twenty minutes.
• Completely Silent - No noise or vibration of any kind
• Produce Less Heat - Less heat generated by the ballasts allows cooler running of the environment. Less heat is less wasted electricity.
• Longer Bulb Life - Lumen output loss over time, with the correct lamp, is dramatically less than with magnetic ballasts.

Bluelab EC and PH Tester Cleaning and Maintenance Kit

Accurate readings simplify crop management and ensure crop improvement . Cleaning and properly storing the probe ensures that you get the most accurate readings possible and increases its life. The surface of the probe is where the instrument reads a solution or soil measurement . If the probe body is dirty , readings may be inaccurate.

Tip: If the EC tester reads a lower conductivity than the actual one, the probe needs cleaning. pH probes specifically, must be kept moist at all times for optimal performance and life.

The set contains:

1. calibration solution pH 4.0 20ml x 2 pcs
2. calibration solution pH 7.0 20ml x 2 pcs
3. calibration solution pH 2.77 20ml x 2 pcs
4. solution for storing pH tester KCL 20ml x 2 pcs
5. solution for cleaning the EU probe 30 ml x 1 pc
6. pH probe cleaning solution 30ml x 1 pc
7. cleaning equipment

Measure pH, conductivity and temperature on the go. The Bluelab Combo Meter provides ultimate convenience by taking care of the three main factors of nutrient absorption simultaneously.

Not only that, but this multi-parameter meter and its probes feature a brilliantly simple design. The Bluelab pH probe is easy to use, clean and calibrate; when the time comes, it's also easy to replace. ( spare probe see here )

Features:

• Measures pH, conductivity (EC, CF, ppm 500 and ppm 700) and temperature (°C, °F)
• Lightweight and portable
• Interchangeable dual compound pH probe
• Large and easy to read display
• Overrange or underrange indicators
• Easy pH calibration at the push of a button
• Low battery indicator.
• Automatic shut-off function
• Indicator of successful pH calibration
• 2x AAA alkaline batteries included
• No calibration required for conductivity and temperature
• 2m cable for measuring hard-to-reach places

BlueLab Guardian Monitor

The Bluelab Guardian Monitor is a continuous indicator of the current EC, pH and temperature levels of your nutrient solution, allowing you to optimize these parameters as your plants progress through each growing phase.

Features:

• "Plant Safe" green LED display
• Visual alarm for high and low settings
• Large, easy-to-read displays
• Greater tolerance to RF/electronic interference is provided
• No conductivity or temperature calibration required
• Waterproof design
• Selectable conductivity and temperature units
• International power supply
• Easy pH calibration at the push of a button
• Adjustable display brightness
• Interchangeable dual compound pH probe
• Settings are saved in case of power loss (non-volatile memory)

How to set up/mount and calibrate, see below in description

The Bluelab Truncheon Meter is a robust and reliable everyday tool for measuring the concentration of nutrients in solution. With Truncheon, you'll ensure your plants get the nutrients they need for superior plant health.

Truncheon is factory calibrated with no moving parts or switches. Simply dip the probe into your feed tank and take the reading shown on the LED display.

Characteristics:

• Blue light display
• No calibration required
• EC, CF and ppm 500 and ppm 700 scales
• Fully waterproof
• Automatic on/off function

How to take your first measurement:

1. Remove the meter from the packaging.
2. Dip the probe head into your solution.
3. Wait about 10 seconds for the thermistor to reach the temperature of the solution.
4. Read the measurement indicated by the flashing LEDs. If the flashing lights alternate between two numbers, the measurement is the value between those two numbers. For example, if the lights alternate from 0.8EC and 1.0EC, the reading is 0.9EC.
5. Truncheon will turn off after about 10 seconds. If additional measurements are to be taken, remove the stick from the solution, wait a few seconds and reinsert it. It will turn on again.
6. We recommend that the probe be cleaned and accuracy checked in Bluelab 2.77 EC Solution once a month.

Note: For low or high temperatures, it may take 1-2 minutes for the probe to reach solution temperature. Try placing the probe in an area where there is strong movement of the solution, or stir the solution with the probe.

Tip: In addition to being used to measure nutrient levels, the Truncheon Meter can also be used to stir nutrients into your solution.

The Bluelab EC pen is the latest innovation in handheld EC meters and is the ultimate solution when it comes to EC measurement.

Measure pH, conductivity and temperature on the go. The Bluelab Combo Meter provides ultimate convenience by taking care of all three fundamentals of nutrient absorption simultaneously.

Not only that, but this multi-parameter meter and its probes feature a brilliantly simple design. The Bluelab pH probe is easy to use, clean and calibrate; when the time comes, it's also easy to replace. Similarly, the Bluelab Conductivity Probe has straightforward functionality that does not require additional calibration.
 

How to use the Bluelab EC pen:

• The conductivity pen comes with a battery and is ready to use out of the box.
• The pen is factory calibrated.
• Press the power button to turn on the Bluelab Conductivity Pen.
• To turn off the pen, press and hold the power button until OFF is displayed.
• The pen will automatically turn off after 4 minutes to conserve battery power.
• Place the probe tip into your nutrient solution and wait for the reading to stabilize.
• Rinse under running tap water after use.

Bluelab pH pen - compact, easy and convenient to use, the best solution for measuring pH.

The Bluelab pH Pen is a durable, compact and accurate pH and temperature pen for use in nutrient solution. Use the pH pen to quickly and accurately tell if your solution is too acidic or alkaline, or too hot or cold. Designed for everyday use, the Bluelab pH Pen helps you keep your plants in the optimal pH and temperature range so your plants can thrive.

Care Tips:

Clean and calibrate your probes monthly to maintain probe accuracy.
Always store the pH probe in the storage cap with enough KCl (potassium chloride) storage solution to cover the tip of the probe. The probe will be damaged if left dry. Read more about KCl Storage Solution.
The glass tube can be easily damaged. Be careful not to hit the glass.
Do not immerse in oils, proteins, or suspended solids, which will leave a coating on the glass flask.
Never store or soak the pH probe in RO, distilled or deionized water.

Bluelab soil pH pen

The Bluelab Soil pH Pen is an accurate way to measure soil pH and temperature directly in the root zone of your plants. If necessary, the soil pH pen can be used in nutrient solutions .

Simply poke a hole in the soil with the storage cap and insert the probe to get constant pH and temperature measurements.

Features:

• Selectable units for °C and °F
• Fully waterproof
• LCD display with backlight
• Read hold function
• Storage cap
• Automatic shut-off function

How to use:
**Important : You must calibrate your pH pen before first use .

• Use the storage cap to make a hole in the soil. Place as deep as the roots of your plant.
• Carefully remove the storage cap by first unscrewing the cap and gently pulling to remove the probe. The cap contains KCl solution , so be careful not to spill the liquid. The formation of a salt crust around the probe is normal.
• Turn on the pen and insert the probe into the opening. Make sure the tip of the probe is in contact with the soil at the end of the hole. The display will stabilize and give you pH and temperature readings.
• Rinse after use to remove nutrient build-up or dirt and replace cap for storage

How to calibrate:
**Calibrate after each cleaning and at least once a month.

• Turn on the pH pen.
• Calibrate to pH 7 by placing the probe tip in a pH 7 solution . Wait for the reading to stabilize between pH 6.6 - pH 7.5 .
• Long press the Cal button until CAL is displayed. Release the button. The calibration sequence will begin flashing "0" on the display in sequence. Once “0000” stops flashing, the sequence is complete. Rinse the probe tip in fresh tap water.
• Repeat with pH 4 solution.
• A checkmark will confirm successful calibration.

Hydrate
** Keep the probe hydrated with Bluelab KCl solution. Without proper hydration, readings may be inaccurate and the probe may break.

1. Add enough KCl storage solution to submerge the tip of the probe in a plastic cup and allow to soak for 24 hours.
2. Make sure there are a few drops of KCl solution in the storage cap .

This meter works very accurate and has a micro processor and automatic temperature compensation.

This is the right choice for a low price if you want to grow like an expert.

Technical Data:

* 250 life hours of the batteries

* Batteries included

* Accuracy: +- 0.1 pH

* Increments: 0.1 pH

* Capacity: -2.0 pH up to +16 pH

This meter works very accurate and has a micro processor and automatic temperature compensation.

​ADWA AD32 - Waterproof EC Tester

• LCD display
• Automatic temperature compensation
• Automatic shutdown after 8 minutes
• Automatic one point calibration
• Including. 4 x 1.5V batteries and protective cover
• Battery life: ± 100 hours
• Waterproof
• Dimensions: 175.5 x 39 x 23 mm
• Package dimensions: 230 x 60 x 68 mm
• Weight: 100 grams
• Range: 0:00 to 20:00 MS / cm, 0.00 - 10:00 PPT, 0.0 ° C - 60.0 ° C
• Resolution: + / - 2% FS (EC / TDS), + / -0.5 ° C
• Accuracy: 0.01 MS / PPT and 0.1 °C

Dozer machine

Works with CO2 tablets . Place CO2 tablets in the slots in the machine and set the interval at which the machine releases them into your tank.

CO2 Boost with ingredients that are 100% all-natural and harmless

- Compact, small and lightweight

- No dangerous open flames!

- No CO2 emitters or generators to mess with

CO2 Boost works from a combination of all-natural compost ingredients.

The ingredients are mixed and placed in the bucket where the CO2 is then naturally created. The pump draws CO2 out of the bucket and released to your plants.

This product releases anywhere from 5000-15000 ppms if your CO2 monitor is placed DIRECTLY in front of the release valve. These levels decrease sufficiently once they are released into the ambient air. If your grow room is properly sealed, you can achieve optimum growing levels at 1200-1500ppms for sizes up to 10'x10'x10', if your growing area is larger than that we suggest multiple buckets.

CO2 Boost lasts at least 60 days if used constantly. If you coordinate our product with a timer to coincide with your lights on/lights off phase, it will last you 75-90 days. We suggest one bucket per growing cycle to be safe. The maximum shelf life of an open bucket is 90 days.

Even though it's a 100% organic product it is completely odorless. 

Each bucket comes with a small air hose that is attached to the pump. The best distribution method is to place this air hose directly over top of your plants to let the Co2 fall downwards onto the leaves and roots. This method is a nice way to dodge problems such as air leaks and ventilation. Inside your order you will find a pamphlet that includes a "set up and growing tips" section for more information.

CO2 Boost's ingredients are 100% all-natural and harmless. As a matter of fact once your bucket has expired you can open the bucket and use the remaining ingredients as high grade fertilizer!. The pump draws CO2 out of the bucket and released to your plants.